- Joined
- Jun 25, 2013
- Messages
- 10
- Motherboard
- Gigabyte Z370n Wifi
- CPU
- i7-8700K
- Graphics
- GTX 1060
- Mac
- Mobile Phone
And for update to 10.13.2 see here: https://www.tonymacx86.com/threads/macos-10-13-2-update.239847/page-53#post-1660771
If using NVIDIA graphics, make sure to have nvdisable=1 in your attributes
Correct, typo from my side!Did you mean, if you don't use NVIDIA ? I thought nv_disable flag disables Nvidia graphics ?
Jep, same hereDownloaded the kexts AppleIntelE1000e.kext and AppleIGB.kext from https://sourceforge.net/projects/osx86drivers/files/Kext/Snow_or_Above/ and added to EFI/Clover/Kexts/Other.
Now Ethernet works fine, both.
Also Audio is working fine.
I have no issues with USB whatsoever. It may be an idea to use the port limit settings/patches and see if that helpsBut I still have two issues with USB:
1. USB type C is not working
2. When I plug in a USB drive, then it isn't recognised immediately. I first have to pull it a little bit. Then it works. This is strange, because I don't have to pull for example my Clover Boot Stick at boot. It's recognised in boot options without any problem. But same stick won't work , when plugin in in OS X. First pull a little bit, then its working.
Hi LongShot,
I managed it
Downloaded the kexts AppleIntelE1000e.kext and AppleIGB.kext from https://sourceforge.net/projects/osx86drivers/files/Kext/Snow_or_Above/ and added to EFI/Clover/Kexts/Other.
Now Ethernet works fine, both.
Also Audio is working fine.
But I still have two issues with USB:
1. USB type C is not working
2. When I plug in a USB drive, then it isn't recognised immediately. I first have to pull it a little bit. Then it works. This is strange, because I don't have to pull for example my Clover Boot Stick at boot. It's recognised in boot options without any problem. But same stick won't work , when plugin in in OS X. First pull a little bit, then its working.
Any idea why ? I had same Problem on another board, so it must be something different then a board issue, right ?
Hi LongShot,
I managed it
Downloaded the kexts AppleIntelE1000e.kext and AppleIGB.kext from https://sourceforge.net/projects/osx86drivers/files/Kext/Snow_or_Above/ and added to EFI/Clover/Kexts/Other.
Now Ethernet works fine, both.
Also Audio is working fine.
But I still have two issues with USB:
1. USB type C is not working
2. When I plug in a USB drive, then it isn't recognised immediately. I first have to pull it a little bit. Then it works. This is strange, because I don't have to pull for example my Clover Boot Stick at boot. It's recognised in boot options without any problem. But same stick won't work , when plugin in in OS X. First pull a little bit, then its working.
Any idea why ? I had same Problem on another board, so it must be something different then a board issue, right ?