- Joined
- Feb 26, 2013
- Messages
- 19
- Motherboard
- Gigabyte Z77X-UP5 TH
- CPU
- Intel Core i7-3770K
- Graphics
- GTX 660ti 2048
- Mac
- Mobile Phone
I have installed High Sierra on GA-Z77X-UP5 TH with the graphics glitch (I have a GTX 660ti)
I make this little guide for GA-Z77X-UP5 TH owners with other graphic card.
I highly recommend test the installation in another hard drive.
1. After made an Installation USB with UniBeast, boot clover without "nv_disable=1"
2.Make the installation :
https://www.tonymacx86.com/threads/...ierra-on-any-supported-intel-based-pc.235474/
3. With Clover Vibrant Edition :
Download Clover Configurator (Vibrant Edition)
Open Clover Configurator
Mount your EFI partition
Open EFI/EFI/Clover/Config.plist
Check the ACPI section and add (+) MATS to Drop Tables
Save
Close Clover Configurator
4. Clover Configurator
Ethernet : AppleIntelE1000e
At this point with Clover I had no sound, I found the script by toleda :
github.com/toleda/audio_cloverALC
(Thanks for people like that)
5. Execute the script with this options:
Note : If you have two screens DISABLE "Inject Nvidia"
I'm not an expert in Hackintosh but I want to make my little contribution to this community
I make this little guide for GA-Z77X-UP5 TH owners with other graphic card.
I highly recommend test the installation in another hard drive.
1. After made an Installation USB with UniBeast, boot clover without "nv_disable=1"
2.Make the installation :
https://www.tonymacx86.com/threads/...ierra-on-any-supported-intel-based-pc.235474/
3. With Clover Vibrant Edition :
Download Clover Configurator (Vibrant Edition)
Open Clover Configurator
Mount your EFI partition
Open EFI/EFI/Clover/Config.plist
Check the ACPI section and add (+) MATS to Drop Tables
Save
Close Clover Configurator
4. Clover Configurator
Ethernet : AppleIntelE1000e
At this point with Clover I had no sound, I found the script by toleda :
github.com/toleda/audio_cloverALC
(Thanks for people like that)
5. Execute the script with this options:
Confirm Realtek ALC898 (y/n): y
ALC898, Audio ID: 0 is not supported, continue (y/n): y
Vaild Audio IDs:
1 - 1/3/5/6 port Realtek ALCxxx audio
2 - 3 port (5.1) Realtek ALCxxx audio, Pink and Blue ports repurposed to outputs
Clover Audio ID Injection (y/n): n
Enter valid Audio ID (0 to exit): 1
ALC898, Audio ID: 0 is not supported, continue (y/n): y
Vaild Audio IDs:
1 - 1/3/5/6 port Realtek ALCxxx audio
2 - 3 port (5.1) Realtek ALCxxx audio, Pink and Blue ports repurposed to outputs
Clover Audio ID Injection (y/n): n
Enter valid Audio ID (0 to exit): 1
Note : If you have two screens DISABLE "Inject Nvidia"
I'm not an expert in Hackintosh but I want to make my little contribution to this community
Last edited: