[Success] Install Mojave on GA-H87-D3H

[stwkan]

Yes, Mojave is running on my system!

MB - Gigabyte GA-H87-D3H
i5-4570
iGPU - Intel HD4600

Sleep & wake up is working too!

Encountered few issues, but all of them can be fixed.

1) Atheros WiFi - Apparently Kext is removed in Mojave. Found in High Sierra, put in /L/E then work out "permission" commands.
2) Missing "Sound Device". I used MultiBeast 10.4 to install AppleHDA. Fixed!
3) USB3.0 - For now, I did a quick USB port limit patch (credits FredWst) in Clover as shown below. For long term, I need to figure out a custom SSDT for my board!
Name: com.apple.driver.usb.AppleUSBXHCI
Find: 83 FB 0F 0F 83 03 05 00 00
Replace: 83 FB 0F 90 90 90 90 90 90
4) SSD Trim. Just a simple ForceTrim command

 

[stwkan]

Well, 10.14.1 broke the USB3.0 ports. I took the effort to learn custom SSDT. After 2 hours of reading & trying, I've managed to setup a working custom SSDT.

All 4 USB3.0 ports in the rear do not use HSxx port. They use SSP3 to SSP6!

 

[elputs]

I've got a Mojave build on GA-H87-D3H with an Intel GeForce GTX 650.

I've got it working but more through luck than judgement I think.

The machine doesn't sleep, I think all the USBs are acting as usb 2 and I couldn't get WiFi to work.

How hard is it to make a custom SSDT?

 

[xbomber2002]

To stwkan
Hi, can you provide us your custom ssdt file. I have same motherboard as you and I need to set usb port limit patch. Cannot build with success a working one for me. Thanks in advance.