Contribute
Register

[Success] i7-6800k + X99-DELUXE II + AMD RX-580

Status
Not open for further replies.
Joined
Oct 10, 2013
Messages
104
Motherboard
ASUS ROG Strix B360-I Gaming
CPU
i9-9900K
Graphics
RX 5700XT
Mac
  1. iMac
  2. MacBook
  3. MacBook Air
  4. MacBook Pro
  5. Mac mini
  6. Mac Pro
Mobile Phone
  1. Android
  2. iOS
special Thanks to tonymacx86 & users who shared their information to help other building Hackintosh


spec
OSX High Sierra 10.13.4
i7-6800k
X99-DELUXE II
AMD RX-580 8GB
EVGA 750 GQ
2x Ballistix Tactical 8GB Single DDR4 3000
Samsung 860 EVO 500GB SSD
Seagate Bare Drives 6TB Barracuda Sata 6GB/s 256MB
LG 27UD60-B 27" 16:9 UHD IPS 4K

working
sound
USB all
Bluetooth & Wi-Fi


doesn't work
Thunderbolt
sound over HDMI



follow this guid
but i have problem with making bootable installation usb i got this error
Couldn't copy apfs.efi to destination EFI folder

by following this guid
just format and name USB
and open terminal and type

sudo diskutil partitionDisk disk2 GPT JHFS+ USB R

then Success creating the usb


i added these drivers (EFI>CLOVER>drivers64UEFI)
Test2.efi
OsxAptioFixDrv-64.efi & OsxAptioFix2Drv-64.efi ( together )
HFSPlus-64.efi

kext used (EFI>CLOVER>kext>10.13)
Lilu.kext & WhateverGreen.kext (for RX580)
VoodooTSCSync.kext (for 6core CPU)
USBInjectAll.kext
X99_Injector USB 3.kext
AppleALC.kext

ALSO EFI>CLOVER>config open by using Clover Configurator
in the boot chose Arguments daert=0 & ncpi=0x3000
in devices added FakeID for ATI
0x67DF1002
in Graphics
ticke the ATI inject
added FB name Dayman
in kernal and kext patchs
FackeCPUID chose BroadWell H and change from
0x040670 to 0x040674

then save and exit



then plug the USB to USB 2.0 port only
and boot from usb

then complete installation as usual

To allow you to press power bottom then boot directly to mac without seeing the clover boot options
also install all drivers follow:


After installation complete these final steps
use clover and mount EFI petition for USB installation
and copy the EFI to desktop
then unmount the EFI partition
after that mount EFI partition for hard drive that mac os installed on
copy the EFI folder that on desktop and replace it with EFI that sexiest

let say you named the hard drive mac
open
EFI>CLOVER>config open by using Clover Configurator
go to boot and default boot volume type mac
and tick timeout -1 and fast and save

will upload EFI file and result for geek-bench for CPU & GPU
 

Attachments

  • EFI.zip
    2.2 MB · Views: 466
  • CPU.JPG
    CPU.JPG
    2.7 MB · Views: 294
  • GPU.JPG
    GPU.JPG
    1.9 MB · Views: 440
Awesome! Do you know if FCPX was happy with your configuration? I have a very similar setup, same processor but using an RX480 Saphire- everything is working great EXCEPT exporting video in FCPX fails with no reason.
 
5960X + Asus X99-A with RX 560 AERO ITX, with Lilu and WEG ==> FCPX Export is all pure CPU power w/o error. Playback are no issue. If the Kexts are replaced with RX560.kext, then MacX Video Converter Pro will show happy hardware encoding, but FCPX output will fail. KGP thread noted Vega 56/64, but prices still need to come down to like $225
 
Status
Not open for further replies.
Back
Top