[Success] i5 3470 - GA-Z77N-WIFI - GTX 650 Ti

[manateeman90]

Yes GTX 650 Ti is fully supported in the Mavericks. The installation process run without any boot flags. Fully native, The installation process goes without any additional flags. But do not forget to disable the integrated graphics in the BIOS.

Thanks for your reply! I went into my BIOS settings this morning and i found the following under the "Peripherals" menu:
1. Init display first: Auto/IGFX/PEG
2. Internal gfx: Auto/disabled/enabled

They are both set to auto by default. So I should disable "internal gfx"? Should I change the "Init display first" setting also?

Edit: I see that you have detailed all your BIOS settings in the original post. I should've read that properly first. I'll give that a try first and see what happens

 

[Niklook]

Edit: I see that you have detailed all your BIOS settings in the original post. I should've read that properly first. I'll give that a try first and see what happens

Yes, I have already described it in the first post.

 

[manateeman90]

I did an install with your settings and it worked like a charm! thanks mate!

 

[yeegf]

I have been meddling with this for over 24 hours, have been changing bios settings and different flags but to no avail.

1.Wifi card has been removed as it is not supported by OS X
2.ALL USB devices plugged into 2.0 USB Port in the back.
3.Monitor plugged into DVI of Motherboard
4.Motherboard using F2 version of Bios (Everyone is using this)

Using the following flags result in this error
"[IOBluetoothHCIController][start] -- Completed
*** [IOBluetoothHCIController][SearchForTransportEventTimeOutHandler] -- Missing Bluetooth Controller Transport!"

-v, -x -v, -v PCIRootUID=0/1 /+ GraphicsEnabler=yes, -v -x PCIRootUID=0/1 /+ GraphicsEnabler=yes

If anyone has the same build as me, please help me. I have tried the OSX86 uniBeast Guide and http://www.tonymacx86.com/golden-bu...pardos-gigabyte-ga-z77n-wifi-build-db-33.html guide.

If you have any idea what the settings should be after loading optimized defaults and what boot flags should be used, do let me know. I will not hesitate to try.

Please help me, thanks

 

[manateeman90]

Hello

Have you attempted a clover build on this system?