- Joined
- Jan 25, 2011
- Messages
- 8
- Motherboard
- GA-Z77N-WIFI OSX 10.9
- CPU
- i5-3470
- Graphics
- GTX 650 Ti
- Mac
- Mobile Phone
Hardware
- Gigabyte GA-Z77N-WIFI
- Intel i5-3470
- Noctua NH-L9i (fan Noctua NF-A9x14 PWM replaced on Noctua NF-B9 PWM)
- Corsair CML8GX3M2A1600C9 2x4GB
- GIGABYTE GTX 650 Ti OC 1Gb (1032MHz)
- Sandisk Extreme SDSSDX-060G-G25 (60GB) + Plextor M5 Pro (256GB)
- Corsair CX500M 500W
- BitFenix Prodigy Orange
Misc
- Emu 0204 USB
- Mobidick BCU43 (Broadcom BCM2045 Class 2) - Bluetooth working with Sleep / Wake
- Logitech Solar Keyboard K760
- Magic TrackPad
- Transcend JetFlash 700 32GB USB 3.0
What works?
- Everything, except onboard Wi-Fi (removed miniPCI, replaced on Bluetooth USB) and fan speed control in Mac OS (power management is OK).
BIOS Setup
- version F2
- VTd - Disabled
- Turbo Boost - Auto (if use sysdef iMac 13.2 - disabled)
- Internal CPU PLL Overvoltage - Auto (if use sysdef iMac 13.2 - disabled)
- XMP Profile 1 - enabled
- CPU Fan Speed - Manual, Slope PWM - 2.50 PWM value/C
- SATA Mode Selection - AHCI (as default)
- xHCI Mode - Auto
- Audio Controller - Disabled (fully worked, but i don't use it)
- Init Display First - PEG (not use Intel 2500)
- Internal Graphics - Disabled
- Intel Rapid Start Technology - Enabled (if use only SSD)
- EHCI Hand-off - Enabled
- OnBoard LAN Controller#2 - Disabled (fully worked, but i don't use it)
- Everything else by default after Loading Optimized Defaults
Installation
Native install with guide http://www.tonymacx86.com/374-unibeast-install-os-x-mavericks-any-supported-intel-based-pc.html UniBeast 3.0.1, by default, without any boot flags. First time there were problems with the installation, startup and operation of the system because of a broken memory module Corsair 1600MHz 4GB (errors in memtest) - replaced and done. And Wi-Fi/Bluetooth miniPCI module removed, because Wi-Fi is not working, and Bluetooth is not fully supported.
If, during the initial setup of Mac OS Ethernet cable is plugged into the right port - available internet connection and login with Apple ID etc.
MultiBeast 6.0.1
Quick Start > DSDT Free
Drivers > Disk > 3rd Party SATA
Drivers > Misc > FakeSMC v5.3.820
Drivers > Misc > FakeSMC v5.3.820 Plugins
Drivers > Misc > FakeSMC v5.3.820 HWMonitor Application
Drivers > Misc > USB 3.0 - Universal by Zenith432
Drivers > Network > Realtek - AppleRTL8169Ethernet 2.0.6
Drivers > System > AppleRTC Patch for CMOS Reset
Bootloaders > Chimera v2.2.1
Customize > Boot Options > Basic Boot Options
Customize > Boot Options > Generate CPU States
Customize > Boot Options > Hibernate Mode - Desktop
Customize > Boot Options > IGPEnabler=No
Customize > Boot Options > Use KernelCache
Customize > System Definitions > Mac Pro > Mac Pro 3,1
Customize > Themes > tonymacx86 Black
System is stable, fully worked - sleep, Apple ID, iCloud, iMessage etc. (FaceTime not tested). Power managment is worked, but depending on sysdef. Mac Pro 3,1 - Turbo Boost enabled - CPU 3,6GHz on 100% load. iMac 12.1 - fully worked Turbo Boost - CPU 3.6GHz on 100% load. iMac 13.2 - best support, but Turbo Boost disabled - CPU 3,2GHz.
Best benchmark GPU score with sysdef iMac 12.1:
iMac 12.1
CineBench R15
OpenGL - 62.4
CPU - 501
GeekBench 3 (64 bits)
3110 10277
iMac 13.2
CineBench
OpenGL - 57,4
CPU - 450
GeekBench 3 (64 bits)
3116 10319
MacPro 3.1
CineBench
OpenGL - 59.87
CPU - 503
GeekBench 3 (64 bits)
3351 11216
MacPro 5,1 - not yet tested
The system used for Final Cut Pro X and worked great.
Fan speed control not available (tested FanControl & smcFancontrol) - Noctua NF-B9 PWM (on CPU Cooler Noctua NH_L9i) low speed to 900 rpm, when CPU multiplier x16 (1,6GHz) and temperature 35-36C - it's very very quiet, but i would like to raise its minimum speed to 1200 rpm. He is still quiet, and when using Turbo Boost, CPU heats less.
In full load CPU temp (core) - 60-62C. GTX 650 Ti OC quiet and cold: idle - 24-25C, 100% load >40C.
This build is quieter than my Mac mini mc816 and three times more powerful in FCPX, Lightroom etc
Im planning to replace the Bluetooth 2.0 module supports version 3.0 (4.0)
Excuse for poor English. Russian bears.
- Gigabyte GA-Z77N-WIFI
- Intel i5-3470
- Noctua NH-L9i (fan Noctua NF-A9x14 PWM replaced on Noctua NF-B9 PWM)
- Corsair CML8GX3M2A1600C9 2x4GB
- GIGABYTE GTX 650 Ti OC 1Gb (1032MHz)
- Sandisk Extreme SDSSDX-060G-G25 (60GB) + Plextor M5 Pro (256GB)
- Corsair CX500M 500W
- BitFenix Prodigy Orange
Misc
- Emu 0204 USB
- Mobidick BCU43 (Broadcom BCM2045 Class 2) - Bluetooth working with Sleep / Wake
- Logitech Solar Keyboard K760
- Magic TrackPad
- Transcend JetFlash 700 32GB USB 3.0
What works?
- Everything, except onboard Wi-Fi (removed miniPCI, replaced on Bluetooth USB) and fan speed control in Mac OS (power management is OK).
BIOS Setup
- version F2
- VTd - Disabled
- Turbo Boost - Auto (if use sysdef iMac 13.2 - disabled)
- Internal CPU PLL Overvoltage - Auto (if use sysdef iMac 13.2 - disabled)
- XMP Profile 1 - enabled
- CPU Fan Speed - Manual, Slope PWM - 2.50 PWM value/C
- SATA Mode Selection - AHCI (as default)
- xHCI Mode - Auto
- Audio Controller - Disabled (fully worked, but i don't use it)
- Init Display First - PEG (not use Intel 2500)
- Internal Graphics - Disabled
- Intel Rapid Start Technology - Enabled (if use only SSD)
- EHCI Hand-off - Enabled
- OnBoard LAN Controller#2 - Disabled (fully worked, but i don't use it)
- Everything else by default after Loading Optimized Defaults
Installation
Native install with guide http://www.tonymacx86.com/374-unibeast-install-os-x-mavericks-any-supported-intel-based-pc.html UniBeast 3.0.1, by default, without any boot flags. First time there were problems with the installation, startup and operation of the system because of a broken memory module Corsair 1600MHz 4GB (errors in memtest) - replaced and done. And Wi-Fi/Bluetooth miniPCI module removed, because Wi-Fi is not working, and Bluetooth is not fully supported.
If, during the initial setup of Mac OS Ethernet cable is plugged into the right port - available internet connection and login with Apple ID etc.
MultiBeast 6.0.1
Quick Start > DSDT Free
Drivers > Disk > 3rd Party SATA
Drivers > Misc > FakeSMC v5.3.820
Drivers > Misc > FakeSMC v5.3.820 Plugins
Drivers > Misc > FakeSMC v5.3.820 HWMonitor Application
Drivers > Misc > USB 3.0 - Universal by Zenith432
Drivers > Network > Realtek - AppleRTL8169Ethernet 2.0.6
Drivers > System > AppleRTC Patch for CMOS Reset
Bootloaders > Chimera v2.2.1
Customize > Boot Options > Basic Boot Options
Customize > Boot Options > Generate CPU States
Customize > Boot Options > Hibernate Mode - Desktop
Customize > Boot Options > IGPEnabler=No
Customize > Boot Options > Use KernelCache
Customize > System Definitions > Mac Pro > Mac Pro 3,1
Customize > Themes > tonymacx86 Black
System is stable, fully worked - sleep, Apple ID, iCloud, iMessage etc. (FaceTime not tested). Power managment is worked, but depending on sysdef. Mac Pro 3,1 - Turbo Boost enabled - CPU 3,6GHz on 100% load. iMac 12.1 - fully worked Turbo Boost - CPU 3.6GHz on 100% load. iMac 13.2 - best support, but Turbo Boost disabled - CPU 3,2GHz.
Best benchmark GPU score with sysdef iMac 12.1:
iMac 12.1
CineBench R15
OpenGL - 62.4
CPU - 501
GeekBench 3 (64 bits)
3110 10277
iMac 13.2
CineBench
OpenGL - 57,4
CPU - 450
GeekBench 3 (64 bits)
3116 10319
MacPro 3.1
CineBench
OpenGL - 59.87
CPU - 503
GeekBench 3 (64 bits)
3351 11216
MacPro 5,1 - not yet tested
The system used for Final Cut Pro X and worked great.
Fan speed control not available (tested FanControl & smcFancontrol) - Noctua NF-B9 PWM (on CPU Cooler Noctua NH_L9i) low speed to 900 rpm, when CPU multiplier x16 (1,6GHz) and temperature 35-36C - it's very very quiet, but i would like to raise its minimum speed to 1200 rpm. He is still quiet, and when using Turbo Boost, CPU heats less.
In full load CPU temp (core) - 60-62C. GTX 650 Ti OC quiet and cold: idle - 24-25C, 100% load >40C.
This build is quieter than my Mac mini mc816 and three times more powerful in FCPX, Lightroom etc
Im planning to replace the Bluetooth 2.0 module supports version 3.0 (4.0)
Excuse for poor English. Russian bears.