Contribute
Register

SUCCESS : i3 2100 ,ga-h67m-d2-b3 (rev 1.0) ,hd 5770

Status
Not open for further replies.
alnr said:
@hacman, we have the same specs except for the card. i got the 6770 which unfortunately is not supported. i'm having problems getting 5770, will it be ok if i get the 5570? will it affect my installation which is based on your build?

i hope your's will fix my hackintosh, it's been a week already and i still don't have a decent hack :D

thanks!!

finally, i have a working hack... thanks hacman for this thread. i bought myself a new 5770 card and everything just installed properly.

im currently on 10.6.7, im still trying to fix my audio. hope i can update to Lion after everything is working properly...

again, many thanks to hacman, tony and to this site
 
great :clap: :clap:

for AUDIO GA-H67M-D2-B3 (rev 1.0) remove any voodoo extra \extension and system \library \extension . run multi beast check system utilities \ apple hda rollback .run , then copy alc888b.kext to extra /extension ,place hda enabler.kext on desktop , run kextbeast run reboot

for (rev 1.1) using dsdt , run multi beast check system utilities \alc8xx \apple hda rollback run reboot .

for (rev 1.1) using easy beast , run multi beast check system utilities \alc8xx \apple hda rollback \non hda enabler alc889 .run reboot

hope it helps cheers :thumbup:
 
^^ copy that, i'll try it later when i get home. btw, how can i layout my keyboard to be like a mac keyboard? i just cancelled the keyboard wizard after installing.

thanks again..
 
karanrajpal4 said:
Bro, i have the same config as you do.. i3 2100 gigabyte h67m d2 b3 and ati 4670. I was successful in installing osx but after install it restarted and i am unable to boot into it. If i use iboot to boot it just restarts and if i use -x -v it just shows a few hundred lines of code and restarts again.. can you please help me? I'm completely new to this.



Did you make any progress on the installer? running into same issue I think.
 
Thanks !!!
Hi, I have successfully installed the version 10.6.8
Hardware:
GA-H67M-D2 rev 1.0 (not equal GA-H67M-D2-B3)
Core I5-2300
8 GB Kingston 1333
Asus ENGT220 1GB HDMI
Seagate Sata 160GB
Samsung Sata 500GB

I used: iboot 3.1.1, mulltibeast 3.8.0, UpdateHelper, MacOSXUpdCombo10.6.8 and tonymacx86-NVIDIA-Update-2.1.0

I used DSDT for GA-H67M-D2-B3 rev. 1.0
For audio:
/Extra/Extensions/GigabyteALC888b.kext
HDAEnabler.kext (con KextBeast)
multibeast 3.8.0 (appleHDA rollback, system utlilities)
 
hacman said:
great :clap: :clap:

for AUDIO GA-H67M-D2-B3 (rev 1.0) remove any voodoo extra \extension and system \library \extension . run multi beast check system utilities \ apple hda rollback .run , then copy alc888b.kext to extra /extension ,place hda enabler.kext on desktop , run kextbeast run reboot

for (rev 1.1) using dsdt , run multi beast check system utilities \alc8xx \apple hda rollback run reboot .

for (rev 1.1) using easy beast , run multi beast check system utilities \alc8xx \apple hda rollback \non hda enabler alc889 .run reboot

hope it helps cheers :thumbup:

having a problem installing my audio, i have a rev1.1 btw. under system profiler i only have an Intel High Definition Audio. i don't see my audio driver. followed this,for (rev 1.1) using dsdt , run multi beast check system utilities \alc8xx \apple hda rollback run reboot .

what else should i check?

thanks..
 
I still don't understand why my usb devices like my wlan adapter are dead after coming back from sleep. Keyboard and mouse are ok I've found out.

I also get "drive not ejected properly" when i have an external hdd plugged in and the computer goes to sleep.

Any ideas?
 
Im still not getting any audio, my mobo is rev 1.1. Any othrer ideas? Tnx
 
Hacman thank you if it weren't for you id have given up by now, my computer is running lion flawlessly
Specs
4gb ram
core i3 2100
250gb hard drive (will add more later)
Nvida 7300 gs (waiting till a good deal to upgrade)
460 watt psu (may return seems weak)
ga-h67m-d2

just wanted to say you rock :headbang:

Audio Tip: Make your OWN dstd then install kexts

only thing not working is front mic in but the back one works but i could care less :thumbup:
 
@muk546 Great :clap: :clap:
 
Status
Not open for further replies.
Back
Top