I would personally love another guide for Mojave, but in the meantime I am having many issues following this guide. Should be mentioned that I am a complete n00b but here goes:
I am using an external 2.5 HDD to usb enclosure instead of the JMicron adapter. I am wondering if this is causing some of my issues.
The installer HD i am using is 500gb. It is too big for Unibeast to see, so i went with the clover method.
When editing my BIOS, v3.61, the guide states"
Security > Device Security
- Serial port = Hidden
- Internal USB = Hidden
- SAS Controller = Hidden
- Legacy Diskette = Hidden
- Embedded Security = Hidden
My BIOS does not look like this is this section, It is missing an SAS Controller option, and instead has IEEE 1394 controller and Ethernet controller
I have set all of the other settings identical to your guide, but when I do, I get the error "non system disk" and I cannot boot from any drive. The only way I can get my clover disk to boot is when I have IDE selected instead of RAID=AHCI under sata emulation
When i change this to IDE I can boot into clover from the drive on the z600 and BEGIN the osx installation, but am soon met with a black screen with a circle slash symbol. I am thinking that it is a graphics card error, and realized that there is no option in clover configurator for me to include my nvidia drivers. When i download the appropriate NVidia drivers on my mac and try to run the package, it says it cannot on my current OS (mojave). What am i supposed to do with those nvidia drivers to package them into my clover install?
Z600 Rev c2
nvidia quadro k600
2x x5675
48GB 10600 ECC Ram
Please help!