[Success] Hackintosh on a Dell Optiplex 7050 SFF & MT Mojave(10.14.1)

[Mitsuhiro]

Two display, only one display well. I need to fix the new problem~

Please tell me how you connected. Did you use graphic card GT730?

 

[lehug]

Please tell me how you connected. Did you use graphic card GT730?

I only user HD630 with the cpu

 

[Mitsuhiro]

I only user HD630 with the cpu

If GT730 is used, 2 displays are possible. The built-in graphic does not respond because various problems occur.

 

[dsener]

could you confirm if what you did as follow
1- disk utility to erase the ISB
2- unibeast to setup the USB for Mojave
3- run Clover configurator
4-Replace the EFI folder in the EFI mount with what you have provided (EFI.zip)

I am not fully sure where exactly the library files go?

Also, do you hvae a setup of your BIOS as well?

I am also thinking that I need to update the plist as my CPU is i5 6600T, not 7 series

Looking forward to your confirmation.

Thanks

 

[Mitsuhiro]

could you confirm if what you did as follow
1- disk utility to erase the ISB
2- unibeast to setup the USB for Mojave
3- run Clover configurator
4-Replace the EFI folder in the EFI mount with what you have provided (EFI.zip)

I am not fully sure where exactly the library files go?

Also, do you hvae a setup of your BIOS as well?

I am also thinking that I need to update the plist as my CPU is i5 6600T, not 7 series

Looking forward to your confirmation.

Thanks

After creating a USB boot disk, apply a patch to suppress panic.

# 1 EFI compressed file: EFI.ZIP
# 1 Compressed library file: Extensions.zip


Kernel panic may occur during installation of Mojave using a USB boot disk.
Add a patch to the USB boot disk to avoid kernel panic.

1. Download the Extensions.zip file.
2. Mount the EFI of the Install macOS Mojave USB boot drive.

3. Extract the Extensions.zip file into EFI / CLOVER / Kexts / Other.

4. Unmount the EFI.

Install Mojave with this USB boot drive.

I hope you get along well.

 

[Mitsuhiro]

Mojave Update 10.14.4

 

[lehug]

Two display works well when I changed to Imac 14.2. The os version is 10.14.4, too.

 

[Mitsuhiro]

Two display works well when I changed to Imac 14.2. The os version is 10.14.4, too.

Thank you for publishing the very great know-how.
The achievement of finding this is yours.
Many people will be delighted.
Does Sleep work?

 

[gstream]

Installed Mojave with the EFI attached, but failed updating to Mojave 10.14.4. Installation stops during installation.

Attached screenshot below.

 

[dsener]

I am also stuck on the same screen. This is after selection DellSMBios. I am using Kojave 10.14.3. Will try with vesrion 10.14.1 and 10.14.4