[ SUCCESS!!! ] GUIDE El Capitan 10.11.3, Asus H81M-C, i5 4460 3,2Ghz, Zotac GeForce GT 740 2Gb GDDR5

[makz]

Hi, i intalled this weekend my Hackintosh:

Excuseme for my bad english.

Hardware:
Asus H81M-C
Intel Core i5 4460 3,2Ghz
Zotac Nvidia GeForce GT 740 2Gb GDDR5
RAM 16Gbs (8 + 8), Corsair Vengeance DDR3 1600Mhz
HDD 200Gb Toshiba SATA 5200RPM (Mac OSX Destination, GUID Table, two partitions OSX / MacData)
HDD 1Tb (MBR Partition Table, actually doble boot 200Gb to Win 7 64Bits and 200Gb to Manjaro 15.09 64Bits, rest to Data NTFS)
DVD RW Generic
Monitor DELL 22 LCD Wide Screen FHD (1920 x 1080), connect DVI to DVI Zotac Graphic Card.

I follow this guide:
http://www.tonymacx86.com/threads/u...pitan-on-any-supported-intel-based-pc.172672/

UNIBEAST 6.2.0
MULTIBEAST EL CAPITAN 8.2.2

USB KINSTON 16Gb (Format: Disk Utility 1 partition; GUID Table; Mac OS Extended journaled)

Unibeast 6.2.0: (Bootloader option UEFI Bios Mode; Graphics Configuration Inject Nvidia Driver)

BIOS Settings:
F5 = Optimized Defaults
Secure Boot = Disable
OS Type = Other OS
Fast BOOT = Disable
Intel Virtualization VTx = Enabled (in my case functionally)
SATA = ACHI

Installation:
Unplug HDD 1Tb (Win/Manjaro)
Only plugged HDD 200Gb (Mac OSX Destination)
Boot USB Unibeast
Disk Utility (Select HDD 200Gb, Two partitions in my case, GUID Table, Mac OS Extended Journaled)
When you arrive at the Installer, choose language, etc,.
Upon completion, the system will automatically restart.

1st. Reboot or Post-Installation:
Choose USB Unibeast
At the Boot Clover Screen, choose my new El Capitan installation.
But, i need to enter the extra boot flag nv_disable=1 to continue the installer (i Dont Know Why, if no, freeze on grey screen)
Complete OS X El Capitan setup

Run Multibeast:
Quick Star = UEFI Boot MOde
Drivers = Audio ALC887/888b; Misc = 3rd Party USB 3.0; Network = RLT8111
Bootloader = Clover UEFI Boot MOde
Customize = Inject Nvidia

Install Nvidia Web Drive (For my OSX version 10.11.3 -15D21- http://www.tonymacx86.com/threads/n...cs-drivers-for-os-x-10-11-3-346-03-05.184105/)
http://www.nvidia.com/download/driverResults.aspx/99119

Reboot a speed good, and all OK = Network; Sound; Graphics run good; to prevent error return of sleep without sound i select in settings - energy - sleep never and HDD no repose.

Clover dont boot from win7, and no recognize Manjaro partitions, i suppossed why this partitions are MBR Table.
For boot from win and Manjaro, when i star the PC, select boot from HDD 1Tb (Win7/Manjaro), and GRUB Manjaro select anywhere of two), and when i want boot from OSX, i select in the BIOS boot from HDD (El Capitan).

Its all OK? or any suggestion?


Thanks all for guides.

 

[procarryotic]

benchmarks plz?

 

[procarryotic]

and did you successfully upgrade to 10.11.4/5

 

[makz]

and did you successfully upgrade to 10.11.4/5

Hi, i reinstall all operative system 10.11.5, not update, it's all ok functionally.