- Joined
- Jul 13, 2012
- Messages
- 94
- Motherboard
- Gigabyte Z590 Vision D
- CPU
- i7-11700K
- Graphics
- RX 5700 XT
- Mac
- Mobile Phone
Got mine Working.
Gigabyte Z590 Vision D
Intel S-i7-11700K
AMD Vega 56 8MB
DIMM DDR4 16/3200 G.Skill AEGIS 2 x 8GB
Monterey
After using your latest open core efi 0.7.7
Not working;
-Ethernet
-Bluetooth
-Wifi
-Audio
To get Ethernet working go in Preference/Network/Ethernet/Advance/Hardware
Change;
1. Configuration = Manual
2. Duplex = Fullduplex. I recommend Fullduplex, Flow Control, more stable.
it is not compatible with Energie Efficient Ethernet mode.
To get Bluetooth and Wifi working using the onboard card.
Install these Kexts in the EFI folder (not in system/library, won't work, tried it)
* Bluetooth *
1. IntelBluetoothFirmware.kext - v2.0.1
2. BlueToolFixup.kext - v2.6.1
3. BrcmPatchRAM.kext - v2.6.1 or later only, not 2.6.0.
* Wifi *
4. itlwm.kext - v2.1.0 or later.
5. Heliport goes into Application folder and then go in preference and set as startup app.
Do not install IntelBluetoothInjector, works under Big Sur but under Monterey all drives will disappear and take about 10 minutes to load system.
Also works on my Z490 Vision D, using the same method.
To get Audio working
Under Device Properties at Device PciRoot(0x0)/Pci(0x1F,0x3)
I added (Key* "layout-id" value "6")
Works, but still shows as Realtek USB 2.0 Audio instead of optical audio.
On the screenshot you see Wifi, Bluetooth, and audio working under Monterey.
No Fernri card, audio card, or sticks needed. Save some money.
Since im at it, update my OpenCore to version 0.8.2 for both my z590 and 490, no problems registered.
Gigabyte Z590 Vision D
Intel S-i7-11700K
AMD Vega 56 8MB
DIMM DDR4 16/3200 G.Skill AEGIS 2 x 8GB
Monterey
After using your latest open core efi 0.7.7
Not working;
-Ethernet
-Bluetooth
-Wifi
-Audio
To get Ethernet working go in Preference/Network/Ethernet/Advance/Hardware
Change;
1. Configuration = Manual
2. Duplex = Fullduplex. I recommend Fullduplex, Flow Control, more stable.
it is not compatible with Energie Efficient Ethernet mode.
To get Bluetooth and Wifi working using the onboard card.
Install these Kexts in the EFI folder (not in system/library, won't work, tried it)
* Bluetooth *
1. IntelBluetoothFirmware.kext - v2.0.1
2. BlueToolFixup.kext - v2.6.1
3. BrcmPatchRAM.kext - v2.6.1 or later only, not 2.6.0.
* Wifi *
4. itlwm.kext - v2.1.0 or later.
5. Heliport goes into Application folder and then go in preference and set as startup app.
Do not install IntelBluetoothInjector, works under Big Sur but under Monterey all drives will disappear and take about 10 minutes to load system.
Also works on my Z490 Vision D, using the same method.
To get Audio working
Under Device Properties at Device PciRoot(0x0)/Pci(0x1F,0x3)
I added (Key* "layout-id" value "6")
Works, but still shows as Realtek USB 2.0 Audio instead of optical audio.
On the screenshot you see Wifi, Bluetooth, and audio working under Monterey.
No Fernri card, audio card, or sticks needed. Save some money.
Since im at it, update my OpenCore to version 0.8.2 for both my z590 and 490, no problems registered.
Last edited: