[Success] Gigabyte Z390 Auros Pro, i9-9900k, Sapphire Nitro+ RX5700XT

[foster]

Gigabyte Z390 Auros Pro 1.0
Intel i9-9900k
G.skill 128GB DDR4-3600 4x32GB
Sapphire Pulse+ AMD RX5700XT
Fractal Design S2
EVGA SuperNova G3 750W PS
LG 27UK650 (2)
Fenvi T919 WiFi/BT card

iServices work
Apple Watch does unlock system

 

[UtterDisbelief]

Gigabyte Z390 Auros Pro 1.0
Intel i9-9900k
G.skill 128GB DDR4-3600 4x32GB
Sapphire Pulse+ AMD RX5700XT
Fractal Design S2
EVGA SuperNova G3 750W PS
LG 27UK650 (2)
Fenvi T919 WiFi/BT card

iServices work
Apple Watch does unlock system

Good work

Did you need Support? You've posted in the Support forum for Big Sur. No obvious troubleshooting that would help others.

If this is the same build as your Profile, please update that with the new GPU.

If a new build, why not post in User Builds to show how you built/installed everything?

 

[ekohn00]

Gigabyte Z390 Auros Pro 1.0
Intel i9-9900k
G.skill 128GB DDR4-3600 4x32GB
Sapphire Pulse+ AMD RX5700XT
Fractal Design S2
EVGA SuperNova G3 750W PS
LG 27UK650 (2)
Fenvi T919 WiFi/BT card

iServices work
Apple Watch does unlock system

Which SMBIOS are you running? Are you able to view DRM videos? 1,1 was best for me....but open to options.

 

[foster]

I use Mac Pro 7,1 (2019)
OpenCore sanity checker complains
I have watched free Apple TV content on it

 

[global6000]

I use Mac Pro 7,1 (2019)
OpenCore sanity checker complains
I have watched free Apple TV content on it

I have very similar system but Gigabyte Master vs Pro. I am having issues with public Beta 2 running on my system. Could you please either look at my config or pass me your so I can compare what my issue might be?

Thanks

 

[foster]

Config fine
all kexts should be updated or compiled on your system

 

[global6000]

I made sure I had all updated kexts. Did not have latest VirtualSMC and had the wrong intelmausi vs intelmausiEthernet kexts. Did a clean install again after completely wiping drive down to one volume and still same kernel panic. ARRGGGHHH

 

[ekohn00]

I made sure I had all updated kexts. Did not have latest VirtualSMC and had the wrong intelmausi vs intelmausiEthernet kexts. Did a clean install again after completely wiping drive down to one volume and still same kernel panic. ARRGGGHHH

Here's my lates EFI with all the latest files.
Make sure you add your SMBIOS specific info.

ports will probably be different too. If you have the USBPorts.Kext just switch them.
Unfortunately I don't know how much more the Master and Pro boards will change this from working.

 

[global6000]

Here's my lates EFI with all the latest files.
Make sure you add your SMBIOS specific info.

ports will probably be different too. If you have the USBPorts.Kext just switch them.
Unfortunately I don't know how much more the Master and Pro boards will change this from working.

Thanks, I just got it running now on Beta 2 with help from this site:

AudioGod's Aorus Z390 Master Patched DSDT EFI for Catalina Mini Guide and Discussion

I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me. This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you. A huge massive thank you to @glasgood...

www.insanelymac.com

It seems your Config is the same as from this post. I have a second Samsung NVme drive in the top slot running windows. My Catalina Nvme is in the second slot and I can see that. I cannot see the windows drive in finder. I believe that may be because it is not defined in the config. Do you know what the setting would be for another samsung NVme drive in the top and second slot?

Otherwise yes seems to be running well again now and boots quickly like before.

 

[ekohn00]

Thanks, I just got it running now on Beta 2 with help from this site:

AudioGod's Aorus Z390 Master Patched DSDT EFI for Catalina Mini Guide and Discussion

I have put together this simple little guide for anybody wanting to use a Patched DSDT EFI with the same configuration as me. This is also a thread to discuss everything Z390 Master and try and help where we can and maybe make things a little better for you. A huge massive thank you to @glasgood...

www.insanelymac.com

It seems your Config is the same as from this post. I have a second Samsung NVme drive in the top slot running windows. My Catalina Nvme is in the second slot and I can see that. I cannot see the windows drive in finder. I believe that may be because it is not defined in the config. Do you know what the setting would be for another samsung NVme drive in the top and second slot?

Otherwise yes seems to be running well again now and boots quickly like before.

I have windows and macOS on separate NVmes. my EFI included the window info. Make sure the paths are the same for you.