- Joined
- Feb 21, 2016
- Messages
- 392
- Motherboard
- Gigabyte Z390 Aorus Master
- CPU
- i9-9900K
- Graphics
- RX 5700 XT
- Mac
- Mobile Phone
So I did a clean install of Mojave, having read that most of the issues with the integrated graphics chip was dealt in Mojave, as it recognizes our intel UHD 630 natively. To my surprise, I had the same exact problems. That was indeed whatevergreen that solved the problem for me, as several users had told me. I must have missed a step when I installed it in High Sierra.
I then used this EFI @pastrychef gave me (thanks again) and sound was back on. Thanks to all of you, I now can fully use my hack and even Logic pro seems to run smoother in Mojave (at least on my system).
@pastrychef , I noticed in the config file you gave me, you chose iMac18,1 system definition. Other users like @jb007 are using iMac18,3 (if I'm correct). From what I understood, this choice has a lot to do with USB ports setup. I read a lot of information on this forum, but I haven't seen a "definitive" guide to USB ports setup in Mojave. So I guess my question is: are there still things that I need to do to get all my usb ports working properly?
SMBIOS 18.1 and 18.3 it has to do with graphics card mostly. Because you are using UHD 630 is preferred to use 18.1, for dGPU is 18.3. As far for the USB port you can use the following SSDT and place it to EFI/CLOVER/ACPI/PATCHED.
I assume that you have usbinjectall.kext installed to L/E or EFI/CLOVER/KEXT/OTHER.