[Success] GigaByte Z170-UD3 - i7-6700K - Shappire RX 580

[markoskz]

Intel Core i7-6700k - GB Z170-UD3 - 16GB DDR4 2400Mhz - Shappire Rx 580 Pulse

Components

Motherboard GigaByte GA-Z170X-UD3 (rev. 1.0) LGA 1151 HDMI SATA 6Gb/s USB 3.1 ATX
Newegg US

Case Corsair Carbide Clear 400c Atx Mid-Tower C
Newegg US

SSD Crucial MX500 2.5" 250GB SATA III 3D NAND Internal Solid State Drive
Newegg US

Corsair Hydro Series H100i V2 Water/Liquid CPU Cooler. 240mm
Newegg US

Corsair Vengeance LPX 16GB (2 x 8GB) 288-Pin DDR4 SDRAM DDR4 2400 (PC4 19200)
Newegg US

Sapphire PULSE Radeon RX 580 8GB GDDR5 PCI-E Dual HDMI / DVI-D / Dual DP
Newegg US

EVGA SuperNOVA 750B 750W ATX12V Power Supply
Newegg US


Comments

Hi all, this is my third construction of Hackintosh, at first try to make a vanilla installation but not achieve stable system, so resort to the method of installation of tonymacx86, I thought it would be so simple, but it works well For the moment.

Installation
This was very simple, install using the Tonymacx86 Guide, as explained step by step, after installed the system, run MultiBeast with the following configuration

Here is a clarification, use the SMBIOS of the Mac Pro 6.1, because with this definition I worked well the preview, ideal would have been 17.1. But I see the system stable.

What Works

• Sleep and wake
• USB 3.0
• Audio
• Ethernet
• Graphics Rx 580 OOB
• App Store/iCloud
• Shut-down

What Doesn’t Work

• iMessage (This is because I use a SMBIOS that is not correct)

Benchmarks
benchmarks from Geekbench 4

A few days ago I experienced a few small freezes, however not very annoying. Regards.

Soon update to 10.14.2 and try to have a system with the SMBIOS 17.1, also, update the post as soon as make changes.

Updates
6 Jan 2019 - Make a new build, I invite you to visit the link below to see the details. The system is very stable, working with Mojave 10.14.3

[Success] PYNTy-Mac i7 8700 - Z390 I AORUS PRO WIFI - 16GB RAM - Sapphire RX 580 - Mojave 10.14.3

markoskz's PYNTy-Mac Hackintosh (Late 2018) i7-8700 - Z390 I AORUS PRO WIFI (itx) - Rx 580 Components Phanteks Enthoo Evolv ITX Tempered Glass http://www.amazon.com/dp/B074W5GQJ3/?tag=tonymacx86com-20 Gigabyte Z390 I AORUS PRO WIFI Motherboard...

www.tonymacx86.com

 

[Ni6htWalker]

i will follow this post to update my hack,thank you.

 

[markoskz]

i will follow this post to update my hack,thank you.

Hi, apparently the freezes were by spotlight, deactivate it and no more freezing, now I use Alfred that is similar.

I'm waiting for me to get the card Broadcom BCM94360CS2, so I can have the complete construction with WiFi and native Bluetooth without additional Ketchs

I'll be reporting any news.

I am also about to update in the next few days with a new construction with z390-I Aorus + i7 8700, just waiting for the purchases to arrive.

Any questions you have or if a problem arises in your construction will be attentive to your message. This community has helped me a lot, so it would be a pleasure also to help.

Best Regards!
Mark

PD:Sorry for my bad English, not my native language

 

[markoskz]

Update - 6 Jan 2019, Make new build, The system is very stable, working with Mojave 10.14.3

[Success] PYNTy-Mac i7 8700 - Z390 I AORUS PRO WIFI - 16GB RAM - Sapphire RX 580 - Mojave 10.14.3

markoskz's PYNTy-Mac Hackintosh (Late 2018) i7-8700 - Z390 I AORUS PRO WIFI (itx) - Rx 580 Components Phanteks Enthoo Evolv ITX Tempered Glass http://www.amazon.com/dp/B074W5GQJ3/?tag=tonymacx86com-20 Gigabyte Z390 I AORUS PRO WIFI Motherboard...

www.tonymacx86.com