Contribute
Register

[SUCCESS] Gigabyte H470M DS3H + i5-10400 + UHD 630 - Catalina

Status
Not open for further replies.
Joined
Nov 16, 2020
Messages
4
Motherboard
Gigabyte H470M-DS3H
CPU
i5-10400
Graphics
Radeon RX 580 8 GB
Mobile Phone
  1. iOS
ShalkeBG's Build:
Gigabyte H470M DS3H + i5-10400 + UHD 630


Components

Gigabyte H470M DS3H Motherboard
https://www.amazon.co.uk/dp/B08BLJSL4Z/?tag=tonymacx86-21

Intel i5-10400 Processor
https://www.amazon.co.uk/dp/B0883NPQST/?tag=tonymacx86-21

Corsair Vengeance LPX - DDR4 - 16GB: 2 x 8 GB - DIMM - 288-PIN - 3000 MHz
https://www.amazon.co.uk/dp/B0134EW7G8/?tag=tonymacx86-21

WD Green SSD WDS480G2G0A - Solid state drive 480 GB - intern - 2.5" - SATA 6Gb/s
https://www.amazon.co.uk/dp/B01M3POPK3/?tag=tonymacx86-21

Be quiet! PURE POWER 11 500W CM Power Supply
https://www.amazon.co.uk/dp/B07JHLD38L/?tag=tonymacx86-21

Sharkoon S1000 Window - Midtowermodel Micro ATX
https://www.amazon.co.uk/dp/B077BWVLH9/?tag=tonymacx86-21


Comments

It took me a while to configure it properly, but eventually, it worked fine using OpenCore 0.6.3. Just follow carefully the OpenCore manual and use my EFI folder, and it should work. Attached are also photos of my BIOS settings so make sure they are the same.

So far everything works like a charm. USB3 and internal audio work as well.
 

Attachments

  • EFIBoot.zip
    2.4 MB · Views: 1,785
  • bios.zip
    17.7 MB · Views: 1,109
Last edited:
Thanks! Worked almos perfect!

I dont have audio via HDMI, do you have it?

Thanks!
 

Attachments

  • 1.png
    1.png
    120 KB · Views: 803
Last edited:
Hello, I bought this same configuration, good work, but the same thing happens to me, I do not have audio in hdmi.
Any solution?
 
After looking at possible solutions and not finding anything that worked for me, I tried a DisplayPort to HDMI adapter cable to connect the computer to the monitor or TV through the DisplayPort output. If there is sound, in the macOS sound properties it tells me that there are no settings for that output (HDMI). The bar to raise or lower the volume does not appear, but nevertheless there is sound.

I click on the speaker icon for the sound, and it cannot be controlled from there because it comes out as if it were disconnected. But it is not a problemA as each audio or video application (youtube, vlc, itunes, quicktime, etc.) has its own toolbar sound and from there if I can raise or lower the volume.

This is the only problem I had with the sound. Both the front and rear inputs and outputs work great for me and the equipment is functional and stable. (I can't let it sleep because I have to restart it.) I don't have a video card either; I only have the one with the i5-10400 processor.

No problem in the NVMe Samsung EVO 970.
 
Hello, I bought this same configuration. I'm having a problem with HDMI and VGA port with iGPU. No display in HDMI and VGA. I just updated BIOS to f21 and still have the same problem. Please help uploading my EFI folder. It's working with a GT 710 graphic card, but it's too slow for me while rendering.
 

Attachments

  • EFI.zip
    2 MB · Views: 240
Hello, I bought this same configuration. I'm having a problem with HDMI and VGA port with iGPU. No display in HDMI and VGA. I just updated BIOS to f21 and still have the same problem. Please help uploading my EFI folder. It's working with a GT 710 graphic card, but it's too slow for me while rendering.
VGA has not been supported for many years.
 
I need HDMI working, not VGA. Please help me in fixing HDMI on boot. It only boots on DisplayPort.
 
I need HDMI working, not VGA. Please help me in fixing HDMI on boot. It only boots on DisplayPort.
May be worth having a read up on:
 
May be worth having a read up on:
Thank you. I got the help from video on YouTube, and not its working. But I'm having a issue in sleep. It doesn't wake-up from sleep; it reboots.
 
About your SSDT files. You've included SSDT-RHUB.aml. Dortania's guide says that the RHUB SSDT is only needed on ASRock and some MSI mobos. Is there some reason why you included it? How about AirDrop, Handoff, and iServices? (This one may be a stupid question.) Is there some reason why you didn't map your USB ports with a USBPorts.kext?
 
Status
Not open for further replies.
Back
Top