Contribute
Register

[Success] Gigabyte GA-Z97X-UD5H | i7-4790K | EVGA GTX 770 4GB | Build Reminder

Joined
May 9, 2011
Messages
120
Motherboard
Gigabyte Z390 Aorus Pro
CPU
i7-9700K
Graphics
2x RX 580
Mac
iMac, MacBook Pro
Mobile Phone
Android
[Success] CLOVER: Gigabyte GA-Z97X-UD5H | i7-4790K | EVGA GTX 770 4GB | Build Reminder

TBO BUILD: 100% CLOVER & 100% YOSEMITE VANILLA

  • Yosemite 10.10.3
  • GA-Z97X-UD5H rev 1.0
  • I7-4790K "Devil's Canyon" boxed
  • EVGA GeForce GTX 770 4GB
  • Corsair Vengeance Low Profile DIMM Kit 16GB, DDR3-1600 (CML16GX3M4A1600C9)
  • Fantec MR-2535DUAL - internal HotSwap Case for 2.5" & 3.5" HDDs - Hotswap on Marvell
  • Fantec MR-2535DUAL - internal HotSwap Case for 2.5" & 3.5" HDDs - non Hotswap on Intel
  • 4 x Crucial m550 SSD
  • 2 x WDC WD30EURS 3 TB
  • PLEXTOR BD-R, PX-B940SA
  • EVGA SuperNOVA G2 850W 80 Gold with Semi Passive Mode ATX 2.3 power supply
  • Corsair Graphite Series 600T white Tower Case
  • Apple Keyboard wired & Logitech MacDesktop Mouse
  • HP NC306T PCIe DP Gigabit Server (NIC)
  • 2 x HP ZR24w 24" Monitor (1980x1200)

What worked OTB and what needed patching:

  • BIOS (F9): see screnshots (Intel Turbo Boost = AUTO, VT-d = ENABLED)
  • Clover (r3202) install UEFI: Maverics and Yosemite
  • Clover settings: see screenshots
  • Graphics: nvidia OTB with Dual DVI Screen
  • Graphics: IGP Disabled in BIOS
  • USB 2.0: all ports OTB
  • USB 3.0: all ports OTB
  • Audio (ALC1150) Kext & Patch in Clover: Info & screenshots
  • Intel Power Management, XCPM mode, SSDT in Clover: Info
  • AGPM: Inject Nvidia & FakeID in Clover: Info
  • Marvel as Hotswap (for orange Icon): Kext & Patch in Clover - see screenshots
  • Network: Qualcomm Atheros Killer E2201 LAN - disabled in BIOS - not tested!
  • Network: Intel® GbE LAN phy - disabled in BIOS - not tested but seems to work
  • Network: HP NC306T PCIe DP Gigabit Server, OTB

DMESG OUTPUT:
Code:
Longterm timer threshold: 1000 ms
PMAP: PCID enabled
PMAP: Supervisor Mode Execute Protection enabled
Darwin Kernel Version 14.3.0: Mon Mar 23 11:59:05 PDT 2015; root:xnu-2782.20.48~5/RELEASE_X86_64
vm_page_bootstrap: 4024693 free pages and 136843 wired pages
kext submap [0xffffff7f80a00000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000a00000]
zone leak detection enabled
"vm_compressor_mode" is 4
multiq scheduler config: deep-drain 0, urgent first 1, depth limit 4, band limit 127, sanity check 0
standard timeslicing quantum is 10000 us
standard background quantum is 2500 us
mig_table_max_displ = 13
TSC Deadline Timer supported and enabled
"name" not a kext
"FailedCLUT" not a kext
"FailedImage" not a kext
AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
calling mpo_policy_init for AMFI
Security policy loaded: Apple Mobile File Integrity (AMFI)
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine policy (Quarantine)
Copyright (c) 1982, 1986, 1989, 1991, 1993
	The Regents of the University of California. All rights reserved.

MAC Framework successfully initialized
using 16384 buffer headers and 10240 cluster IO buffer headers
AppleKeyStore starting (BUILT: Mar 23 2015 11:37:46)
FakeSMCKeyStore: started
IOAPIC: Version 0x20 Vectors 64:87
ACPI: sleep states S3 S4 S5
CPUSensors: CPU family 0x6, model 0x3c, stepping 0x3, cores 4, threads 8, TJmax 100
CPUSensors: setting platform keys to [j43     ]
CPUSensors: base CPU multiplier is 40
CPUSensors: started
pci (build 11:38:56 Mar 23 2015), flags 0xe3000, pfm64 (39 cpu) 0x7f80000000, 0x80000000
[ PCI configuration begin ]
console relocated to 0x7f89000000
[ PCI configuration end, bridges 8, devices 14 ]
ACPISensors (TZ00): 1 sensor added
ACPISensors (TZ00): started
FakeSMC v6.14.1364 Copyright 2014 netkas, slice, usr-sse2, kozlek, navi, THe KiNG, RehabMan. All rights reserved.
ACPISensors (TZ01): 1 sensor added
ACPISensors (TZ01): started
FakeSMC: 13 preconfigured keys added
FakeSMC: 5 keys exported by Clover EFI
SMC: successfully initialized
SuperIODevice: found ITE IT8620E on port=0x2e address=0xa30
mcache: 8 CPU(s), 64 bytes CPU cache line size
mbinit: done [128 MB total pool size, (85/42) split]
GeforceSensors: starting early shadow VBIOS...
GeForceSensors (pci1): trying to shadow VBIOS...
IT87xxSensors: started
rooting via boot-uuid from /chosen: xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeDataless kmod start
com.apple.AppleFSCompressionTypeZlib load succeeded
com.apple.AppleFSCompressionTypeDataless load succeeded
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SAT0@1F,2/AppleAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/Crucial_CT256M550SSD1 Media/IOGUIDPartitionScheme/Darwin@2
BSD root: disk2s2, major 1, minor 8
GeForceSensors (pci1): VBIOS successfully read from PROM
GeForceSensors (pci1): chipset: GK104 (NVE4) bios: xx.xx.xx.xx
GeForceSensors (pci1): started
hfs: mounted Yosemite on device root_device
XCPM: registered
VM Swap Subsystem is ON
IOGraphics flags 0x43
NVDAStartup: Official
NVDAGK100HAL loaded and registered
Previous shutdown cause: 5
[IOBluetoothHCIController][start] -- completed
DSMOS has arrived
IOPPF: XCPM mode
X86PlatformShim::sendPStates - Success!
X86PlatformShim::sendPStates - Success!
X86PlatformShim::sendPStates - Success!
X86PlatformShim::sendPStates - Success!
X86PlatformShim::sendPStates - Success!
X86PlatformShim::sendPStates - Success!
X86PlatformShim::sendPStates - Success!
X86PlatformShim::sendPStates - Success!
[AGPM Controller] build GPUDict by Vendor10deDevice119d
Ethernet [Intel8254x]: Link up on en0, 1-Gigabit, Full-duplex, Symmetric flow-control, Debug [xxxx,xxxx,xxxx,xxxx,xxxx,xxxx]
pflog0: promiscuous mode enable succeeded
**** [IOBluetoothHCIController][SearchForTransportEventTimeOutHandler] -- Missing Bluetooth Controller Transport!
RUNS AS IMAC14,2 - ALL WORKING, ALL HARDWARE, SLEEP/WAKE, SPEEDSTEP...

iMessage, AppStore, iTunes-Store and FaceTime are working w/o any probs. However I'm using the MLB from a broken Logicboard of an iMac 14,2.

Boot Time OS X with Dual Screen 8,79 sec

UPDATE 2015/08/07
10.10.4 update without any probs and without any need for post patches.
--
 

Attachments

Joined
May 9, 2011
Messages
120
Motherboard
Gigabyte Z390 Aorus Pro
CPU
i7-9700K
Graphics
2x RX 580
Mac
iMac, MacBook Pro
Mobile Phone
Android
out of the box. i've changed it to OTB now ;)
 
Joined
May 16, 2015
Messages
7
Motherboard
GA-Z97X-UD7-TH
CPU
i7-4790k
Graphics
GTX 960 G1 Gaming 4GB
Mac
MacBook Pro
Classic Mac
Mobile Phone
iOS
I'm having issues with my install. In that I don't even boot fully to the installer. Do you thinking that Clover is better suited than Unibeast with the 9 series?
 

Stork

Admin
Staff member
Joined
Sep 21, 2010
Messages
13,387
Motherboard
ASUS ROG MAXIMUS X HERO Z370
CPU
i7-8700K
Graphics
RX 580
Mac
MacBook Pro, Mac mini, Mac Pro
Classic Mac
Power Mac, PowerBook
Mobile Phone
iOS
I'm having issues with my install. In that I don't even boot fully to the installer. Do you thinking that Clover is better suited than Unibeast with the 9 series?
Nope. My 8/9-series motherboard systems work fine with UniBeast, Chimera and MultiBeast.
 
Joined
May 16, 2015
Messages
7
Motherboard
GA-Z97X-UD7-TH
CPU
i7-4790k
Graphics
GTX 960 G1 Gaming 4GB
Mac
MacBook Pro
Classic Mac
Mobile Phone
iOS
Is it typical to install using just the on board graphics? Then once installed switch to the discrete card? Hours of futility but I eventually have everything up and running smoothly. Love it!
 
Joined
May 9, 2011
Messages
120
Motherboard
Gigabyte Z390 Aorus Pro
CPU
i7-9700K
Graphics
2x RX 580
Mac
iMac, MacBook Pro
Mobile Phone
Android
I'm having issues with my install. In that I don't even boot fully to the installer. Do you thinking that Clover is better suited than Unibeast with the 9 series?
To be honest I don't know. I never used UniBeast. I've switched from Chameleon to Clover. I find Clover pretty cool for UEFI boards and with its Clover Configurator easy to use. AFAIK Chameleon/Chimera is better suited for legacy BIOS.

Is it typical to install using just the on board graphics? Then once installed switch to the discrete card? Hours of futility but I eventually have everything up and running smoothly. Love it!
Well, I've never used the on board (on chip) graphics. Just test for proper clover settings (inject or not inject) and install. However, before I buy new hardware, I first check how smooth it will run with OS X and Linux.
 
Joined
May 9, 2011
Messages
120
Motherboard
Gigabyte Z390 Aorus Pro
CPU
i7-9700K
Graphics
2x RX 580
Mac
iMac, MacBook Pro
Mobile Phone
Android
UPDATE 2015/08/07
10.10.4 update without any probs and without any need for post patches.
 
Joined
Jul 18, 2015
Messages
39
Motherboard
Asrock H97M-ITX/ac
CPU
i7-4790K
Graphics
RX 570
Mac
Mac mini
Mobile Phone
iOS
Hi aedon,

We have almost the same PC configuration, and as well i have installed Yosemite via Clover. Everything seems to run great also to me.

But for now, my question is about Bootloader.
Check this out, when i boot into Yosemite from the USB Clover, the Clover menu, Apple logo and Loading bar it is how it should be (i'm meaning with the property resolution 2560x1440), but when i boot to Yosemite from the SSD Clover,the resolution of the Clover menu it is bigger and stretched, and of course the Apple logo and Loading bar as well.

-Do you know how i can FIX this? It is so wired.. it is not a big deal, but it's just make me wonder Why?
-Why when i Boot to Clover Bootloader from USB it is showing properly, and when i Boot from SSD not.

Edit: I Fix it :D. By installing from Clover CsmVideoDxe-64 and now works great.
 
Last edited:
Joined
Sep 14, 2011
Messages
15
Motherboard
Lenovo IdeaPad Z500 (product 5931)
CPU
Intel(R) Core(TM) i7-3520M CPU @ 2.90GHz
Graphics
Intel(R) HD Graphics 4000, 1366x768
Mac
MacBook Pro
Classic Mac
Mobile Phone
Android
Hi aedon,

I have the same environment, but don't succeed...
Can you share the EFI config partition? .kext .plist .efi .aml :)
thanks in advance,
regards
 
Top