- Joined
- Jul 26, 2014
- Messages
- 12
- Mac
- Classic Mac
- Mobile Phone
This line npci=0x2000 PCIRootUID=1 should go into the /Extra/org.chameleon.Boot.plist but I guess that's what you did?
I also had problems with audio and video similar to yours. To get rid of them I had to install these kexts:
HDAEnabler1.kext
HDAEnabler2.kext
(not sure if both are needed or if one is an older version but I took both and it works
They are here: https://github.com/toleda/audio_kext_enabler
Then I also had to install the Web driver from Nvidia to make everything work nicely:
http://www.tonymacx86.com/graphics/...ate-graphics-drivers-10-9-4-334-01-02f02.html
And here is the CUDA driver also btw in case you need it:
http://www.nvidia.com/object/macosx-cuda-6.0.51-driver.html
Don't remember what it was that made it, but after installing these I got everything working nicely.
I just upgraded to BIOS F7 btw. No problem.
Regarding RAM, mine also ran at 1300 at first but then I just selected Profile1 for Extreme Memory Profile (under M.I.T. in the BIOS) and it went into its normal max speed and works fine.
I also had problems with audio and video similar to yours. To get rid of them I had to install these kexts:
HDAEnabler1.kext
HDAEnabler2.kext
(not sure if both are needed or if one is an older version but I took both and it works
They are here: https://github.com/toleda/audio_kext_enabler
Then I also had to install the Web driver from Nvidia to make everything work nicely:
http://www.tonymacx86.com/graphics/...ate-graphics-drivers-10-9-4-334-01-02f02.html
And here is the CUDA driver also btw in case you need it:
http://www.nvidia.com/object/macosx-cuda-6.0.51-driver.html
Don't remember what it was that made it, but after installing these I got everything working nicely.
I just upgraded to BIOS F7 btw. No problem.
Regarding RAM, mine also ran at 1300 at first but then I just selected Profile1 for Extreme Memory Profile (under M.I.T. in the BIOS) and it went into its normal max speed and works fine.
Thanks for replying mk.
I copied and pasted afuera's chameleon and smbios plist's into terminal so npci=0x2000 PCIRootUID=1 is in there. Not sure what it means though. Does it mean that my boot flag should have 0x2000 rather than 0x3000?
As for anything in the bios that has to do with that I don't know what it is or where it is. I looked, just now, but didn't know what I was looking for. Most of the bios seems to be a bunch of things that can only be disabled or set to auto, and a bunch of other things that cannot be altered. Like the F7 bios itself
Also my memory is 1600mhz. I had to change the multiplier to 16 get up to that value. Everything said 1333mhz to start with and the frequency still says 1333mhz on the first bios page. No way to change it. I set some other thing to auto, but that had no effect.
I didn't try any video until after I'd done everything the first post said to do. I was dealing with the boot error issue. Didn't care about video at that point.
I don't know how to know if usb 3 is working. I know the plugs work though. Audio? Not there yet either. My old mac pro had a single audio out plug, so the cable from it is useless on the hack it seems.
Was looking into clover. I guess I will try a re-install one way or the other. Anything else you recommend besides no drivers?
Thanks again.