- Joined
- Feb 7, 2014
- Messages
- 11
- Motherboard
- Gigabyte H81M-H
- CPU
- i7-4790
- Graphics
- HD 4600
- Mac
- Mobile Phone
I'm proud to have success in my first project! thanks to the community by the support!!! yeaahhh!!
Hardware specifications:
Total price in my coin: R$ 2.000,00
Software specifications:
Thank you very much!
Juliano
Hardware specifications:
- Mobo Gigabyte Ga-h81m-h Lga 1150 Hdmi Usb 3.0
- CPU Intel core I5-4440 3.1GHZ 6MB LGA1150 BOX 4ª generation
- SSD 120 GB Sandisk (to OSX)
- HDD WESTERN DIGITAL 1TB SATA 6.0GB/S WD10EZEX 64MB 7200 RPM (to data)
- Case COOLER MASTER N200 black
- Power Supply WISECASE 600W 20+4P 1X12 FNWD0007
Total price in my coin: R$ 2.000,00
Software specifications:
- Yosemite 10.10.3
- On installation boot:
- Pendrive in motherboard usb input (don't use the front side case usb input)
- Add -gux_defer_usb2 -gux_no_idle dart=0 in Boot Args (Clover options menu)
- Activate USB Ownership in Clover options (PCI devices menu)
- Activate Kernel PM Patch in Clover options (Binaries patching menu)
- Pendrive in motherboard usb input (don't use the front side case usb input)
- Post installation:
- Install multibeast, and don't forget: audio (ALC887/888b Current) and lan (Realtek RTL8111 v1.2.2)
- Install and configure clover to boot by EFI partition
- Replace config.plist file of the EFI partition by attached file (make a backup from the original file in your desktop to recovery in case of problem)
Thank you very much!
Juliano
Attachments
Last edited: