Contribute
Register

[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

I just upgraded from Big Sur to Monterey 12.4 and I’m unable to login. The install appears to have completed successfully. However, after I enter my password, the screen goes black for a few seconds then back to the login page. Been troubleshooting for a few days with no luck and not sure where to go from here. If anyone can help point me in the right direction, I’d appreciate it!

Z390 Designare, i9-9900k, RX580, Dual Monitors via HDMI, Fenvi T919
Bios: F9i
Opencore 0.8.3
My config.plist and screenshots of EFI (created with HackinDROM) are attached
 

Attachments

  • config.plist
    34.3 KB · Views: 27
  • EFI 1A Screen Shot 2022-09-21 at 2.08.46 PM.png
    EFI 1A Screen Shot 2022-09-21 at 2.08.46 PM.png
    450.4 KB · Views: 14
  • EFI 1B Screen Shot 2022-09-21 at 2.09.41 PM.png
    EFI 1B Screen Shot 2022-09-21 at 2.09.41 PM.png
    454 KB · Views: 13
Hello,

I've been running this machine on Monterey 12.1 OpenCore 79 for a while and all was working well.
Including my 10GBe Qnap card.

the other day I had some issues with program and decided it was time to upgrade to Monterey 12.6 and OpenCore .84

Everything works except I can't get my 10Gbe card to work while the internal 1Gbe and wifi works.
It's one or the other.

Turned VT-D on in BIOS
Added the v3 patch for Aquantia
Forced Aquantia=enabled

If I DisableIOMapper = false the 10Gbe works, but I loose everything else network wise.

Z390 Designare, i9-9900k, RX580
Opencore 0.8.4

Any help is mucho appreciated.

otherwise I have to downgrade to Monterey12.1
 
Hello,

I've been running this machine on Monterey 12.1 OpenCore 79 for a while and all was working well.
Including my 10GBe Qnap card.

the other day I had some issues with program and decided it was time to upgrade to Monterey 12.6 and OpenCore .84

Everything works except I can't get my 10Gbe card to work while the internal 1Gbe and wifi works.
It's one or the other.

Turned VT-D on in BIOS
Added the v3 patch for Aquantia
Forced Aquantia=enabled

If I DisableIOMapper = false the 10Gbe works, but I loose everything else network wise.

Z390 Designare, i9-9900k, RX580
Opencore 0.8.4

Any help is mucho appreciated.

otherwise I have to downgrade to Monterey12.1
Please check this guide for fully enabling AppleVTD. The v3 kernel patch for Aquantia must be disabled because “ForceAquantia” kernel quirk takes its place.

If problem persists please let us know.
 
I'd like to have my Thunderbolt bus activated. However, if I flash the custom firmware, then it'll refuse to work under Windows. Is there a way to make a flashed Titan Rridge card work under both OS? Or alternatively activate without flashing?
 
Last edited:
@CaseySJ genius bro !
I should tell you that this is a very special thunderbolt card used on hp z2 series(z2 g4/g5/g8 sff/twr,my machine is z2 g5 sff which is w480 chipset) with tow part of it , a pcie card and a hp flex io card with tow wires chain them together .
The PD firmware indeed locate on somewhere else.
View attachment 555047View attachment 555049View attachment 555050View attachment 555051View attachment 555052
View attachment 555045
View attachment 555046
Hello @CaseySJ.
It is me again. I still can not make the hotplug work properly . Is there any suggestion or posibility could made it success ?
Thank you for your great help.
 
Hi @CaseySJ
I've got a weird bug where anytime I try to share my screen during a Zoom call, the Zoom app just completely crashes. I've tried this in Safe Mode and the same happens. It doesn't matter if I'm sharing any of my windows or a particular application, the app always crashes with exactly the same crash report (attached the zip here).

Crashed Thread: 0 Dispatch queue: com.apple.main-thread

Exception Type: EXC_BAD_INSTRUCTION (SIGILL)
Exception Codes: 0x0000000000000001, 0x0000000000000000
Exception Note: EXC_CORPSE_NOTIFY

Termination Signal: Illegal instruction: 4
Termination Reason: Namespace SIGNAL, Code 0x4
Terminating Process: exc handler [8198]

Application Specific Information:
Crashing on exception: -[NSTaggedPointerString _getValue:forType:]: unrecognized selector sent to instance 0x1c2197b65b9e217

Having done some extensive googling, I'm unable to find a single report of this elsewhere, so it leads me to believe it's not a Zoom issue itself, but something to do with my Hackintosh configuration. Particularly since I'm not having this behavior on any of my other actual Mac computers at home, just the Hackintosh.

Every time that the app crashes, system.log displays the following message:
Sep 22 14:15:00 D-Mac com.apple.xpc.launchd[1] (us.zoom.xos.69964[10768]): Service exited due to SIGILL | sent by exc handler[10768]
Sep 22 14:15:00 D-Mac com.apple.xpc.launchd[1] (com.apple.xpc.launchd.domain.pid.diskutil.10798): Failed to bootstrap path: path = /usr/sbin/diskutil, error = 2: No such file or directory


Here's the basic config info from HackinDROM:
1663877331890.png

I also attached the config.plist for my OpenCore installation.

Also, not sure if it's related at all, but I'm also seeing a ton of the following in the system.log:
Sep 22 14:13:35 D-Mac com.apple.xpc.launchd[1] (com.apple.mdworker.shared.1F000000-0100-0000-0000-000000000000[10570]): Service exited due to SIGKILL | sent by mds[132]
Sep 22 14:13:35 D-Mac com.apple.xpc.launchd[1] (com.apple.mdworker.shared.1E000000-0200-0000-0000-000000000000[10564]): Service exited due to SIGKILL | sent by mds[132]
Sep 22 14:13:35 D-Mac com.apple.xpc.launchd[1] (com.apple.mdworker.shared.19000000-0700-0000-0000-000000000000[10532]): Service exited due to SIGKILL | sent by mds[132]
Sep 22 14:13:35 D-Mac com.apple.xpc.launchd[1] (com.apple.mdworker.shared.1B000000-0000-0000-0000-000000000000[10566]): Service exited due to SIGKILL | sent by mds[132]
Sep 22 14:13:35 D-Mac com.apple.xpc.launchd[1] (com.apple.mdworker.shared.17000000-0500-0000-0000-000000000000[10569]): Service exited due to SIGKILL | sent by mds[132]
Sep 22 14:13:35 D-Mac com.apple.xpc.launchd[1] (com.apple.mdworker.shared.08000000-0600-0000-0000-000000000000[10559]): Service exited due to SIGKILL | sent by mds[132]


Would REALLY appreciate your help with this puzzle.

Thanks!
David
 

Attachments

  • Zoom_Ignore_zoom.us_2022-09-22-135429_D-Mac_5.11.11 [10514]_C02ZNZZHJV3Q.crash.zip
    29.9 KB · Views: 15
  • config.plist
    34.5 KB · Views: 22
Hi @CaseySJ
I've got a weird bug where anytime I try to share my screen during a Zoom call, the Zoom app just completely crashes. I've tried this in Safe Mode and the same happens. It doesn't matter if I'm sharing any of my windows or a particular application, the app always crashes with exactly the same crash report (attached the zip here).



Having done some extensive googling, I'm unable to find a single report of this elsewhere, so it leads me to believe it's not a Zoom issue itself, but something to do with my Hackintosh configuration. Particularly since I'm not having this behavior on any of my other actual Mac computers at home, just the Hackintosh.

Every time that the app crashes, system.log displays the following message:



Here's the basic config info from HackinDROM:

I also attached the config.plist for my OpenCore installation.

Also, not sure if it's related at all, but I'm also seeing a ton of the following in the system.log:



Would REALLY appreciate your help with this puzzle.

Thanks!
David
Hello David,

I recently encountered problems in simply launching Zoom on one of my systems. After trying this and that, I just uninstalled and reinstalled the application. That solved my particular problem. So it may be a good idea to do that first.

Uninstall Zoom from the menu bar as shown:
Screenshot 2022-09-22 at 1.37.00 PM.png


Then download latest version from https://zoom.us and install.
 
I'd like to have my Thunderbolt bus activated. However, if I flash the custom firmware, then it'll refuse to work under Windows. Is there a way to make a flashed Titan Rridge card work under both OS? Or alternatively activate without flashing?
Some questions and comments:
  • Which Thunderbolt card are you using?
  • Have you already tried flashing the card and seeing what happens in Windows?
  • The only method we know to activate Thunderbolt Bus on Titan Ridge is by flashing the firmware. There is another method that involves a BIOS PEI and/or DXE driver, but we are not familiar with that process.
 
Hello @CaseySJ.
It is me again. I still can not make the hotplug work properly . Is there any suggestion or posibility could made it success ?
Thank you for your great help.
Some questions:
  • Does hot plug work for some Thunderbolt devices (not USB devices) and not for other Thunderbolt devices?
  • Or hot plug does not work at all?
  • Which Thunderbolt devices do you have (not USB)?
 
Back
Top