[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

[CaseySJ]

The link: https://www.newegg.com/gmyle-bcm20702/p/2BH-00AJ-00001
Here is the screenshot.
Thanks.

View attachment 539387

Is the Bluetooth dongle plugged into your Apple keyboard? Have you tried moving it to a USB port directly on the rear IO panel (preferably a black USB 2.0 port)?

 

[Perdomo15]

I'm using F9i. LMK if you need F9i.

After BIOS configuration, I lock the setup:

Is this for me @jiffyslot ?

 

[Itshuta]

Is the Bluetooth dongle plugged into your Apple keyboard? Have you tried moving it to a USB port directly on the rear IO panel (preferably a black USB 2.0 port)?

referably a black USB 2.0 port)?

Yes, the dongle is plugged into my good old Apple keyboard.
I tried on different port including the rear IO panel without any luck.
Maybe it is time for me to try your intel-wireless EFI ?
Is it more reliable now ? and can I enable Bluetooth and keep my wifi card ?
Or do I have to physically remove it ?
Thanks.

 

[CaseySJ]

Yes, the dongle is plugged into my good old Apple keyboard.
I tried on different port including the rear IO panel without any luck.
Maybe it is time for me to try your intel-wireless EFI ?
Is it more reliable now ? and can I enable Bluetooth and keep my wifi card ?
Or do I have to physically remove it ?
Thanks.

Intel Bluetooth does not currently work in Monterey.

If you already have a Fenvi FV-T919, both Bluetooth and WiFi should work natively. Are you experiencing any problems with that card?

 

[Itshuta]

I am not using a Fenvi FV-T919 unfortunately.
I am using a TP-LINK TL-WDN7280 for my wifi and a dongle for my Bluetooth.

 

[Itshuta]

I am not using a Fenvi FV-T919 unfortunately.
I am using a TP-LINK TL-WDN7280 for my wifi and a dongle for my Bluetooth.

It is fixed.
Sorry, I haven't slept enough and I've quit coffee, so it might happen again.
I did not saved my SSD boot order yesterday, so I was booting on OpenCore 7.2 instead of 7.6
Now everything is working flawlessly.
A big thank you as usual.

 

[CaseySJ]

** OpenCore 0.7.7 EFI for Z390 Designare **
Supports Mojave, Catalina, Big Sur, and Monterey
Please do not quote this post in its entirely. Use a link instead.

Also available from HackinDROM

** NOTE **
Mojave and Catalina Users: Please see "Post-Update Procedure" below.

Please use OpenCore Configurator 2.56.0.0 and ensure that it's set to
0.7.7 Release Version

When using OpenCore Configurator, ensure that only one EFI partition is mounted​

Windows Users:
If you are unable to boot Windows through OpenCore, try disabling AppleVTD by following the bottom half of this post.

Monterey -- What Does Not Work:

• Intel I-211 Ethernet port driven by SmallTreeIntel82576 is not working at this time. The other Ethernet port (I-219) is fully operational. If a second Ethernet port is needed, options include:
  • USB to Gigabit Ethernet adapter
  • USB to 2.5GbE Ethernet adapter
  • USB-C dock with built-in Ethernet port
  • Thunderbolt dock with built-in Ethernet port
  • Apple Thunderbolt to Gigabit Ethernet adapter (requires AppleVTD to be enabled)
• Laird BT851 Bluetooth 5.0 USB dongle not working at this time.
• If Monterey is installed on Samsung NVMe SSDs, boot time can increase by 60-100 seconds due to "trim" incompatibilty.
  • This can be addressed by cloning the Samsung NVMe SSD to another disk, erasing the Samsung NVMe SSD with Disk Utility, and cloning macOS back. Please be careful with this process if you decide to do it.
• Crucial P2 NVMe SSDs (only P2 series) also suffer from trim issues in Monterey.

This Update Includes:

• OpenCore 0.7.7
• AppleALC 1.6.8
• Lilu 1.5.9
• WhateverGreen 1.5.6
• RestrictEvents 1.0.6
• OpenIntelWireless ZIP:
  • IntelBluetoothFirmware 2.1.0
  • IntelBluetoothInjector 2.1.0 (not used in Monterey)
  • AirportItlwm 2.1.0 for Mojave, Catalina, Big Sur, Monterey

Instructions:

• Download appropriate ZIP file below and follow these instructions to configure config.plist.
• If "Resizable BAR Support" is enabled in BIOS, set ResizableAppleGpuBars to 0 in Booter quirks.
• Copy EFI folder to EFI partition of USB flash disk and boot from USB flash disk.
• Ensure that REL-077-xxx appears on bottom right corner of OpenCanopy Picker.
• If everything is okay, mount the EFI partition of USB flash disk and internal macOS SSD, then copy EFI folder from USB flash disk to internal macOS SSD.

Things to Test or Check:

• Any OCS or other warnings before OpenCore picker appears?​
• Does macOS boot properly?​
• Does Bluetooth work? Can you enable and disable Bluetooth?​
• Does Bluetooth work if you (a) boot into Windows and then (b) boot into macOS without doing a cold start?​
• If you use "Resizable BAR Support" in Windows, try enabling that in BIOS and check if macOS boots properly.​

Catalina and Mojave Users:

• Set SecureBootModel to Disabled.
  

---

Issues:

---

Which File to Download:

• Broadcom WiFi/BT (such as Fenvi FV-T919) --> OC-077-DESIGNARE-Z390.zip
• Intel WiFi/BT --> OC-077-DESIGNARE-Z390-INTEL-WIRELESS.zip

Reminder:

• Radeon VII and Vega 56/64 users must disable or remove boot argument agdpmod=pikera.

Updates:

• 14-Jan-2022: First version

 

[jiffyslot]

Is this for me @jiffyslot ?

This is for anyone who needs F9i for the Z390 Designare since Gigabyte removed that version. I was lucky to have a backup after F9j became problematic. I am distrustful of any BIOS that does not allow reversion, but that's just me.

 

[myname71]

Just updated to OC 0.7.7 and everything works well.
Thanks Casej

 

[f10]

All works well and the new system for the chime being routed to all outputs is a very elegant solution.
I use the built-in intel wifi and bluetooth on Monterey 12.2. Intel Bluetooth does work but breaks after sleep; opening bluetooth settings does reactivate bluetooth most of the time after wake...with heavy cpu-load for about 30s as others have described. Sometimes it fails to come back and bluetooth remains unavailable even in Windows until I do a complete AC-off cold boot.