- Joined
- Jan 21, 2018
- Messages
- 282
- Motherboard
- Asus Z690 ProArt Creator
- CPU
- i9-12900K
- Graphics
- AMD RX 6900 XT
- Mac
- Mobile Phone
Hi @ummario,
Apologies for the late reply. Alder Lake is consuming all my attention at the moment.
Anyway, some things to check from hardware point of view first:
The other issue is this:
- What is the power rating on your PSU?
- How many PCIe cards are installed?
- Have you considered connecting power cable to 2x2 PEG power adapter near the SATA ports? This will provide more power to PCIe slots.
View attachment 534874
Hi @CaseySJ, you don't need to apologize. It's me who should do it.
The 'God of the Hackintoshers' needs all your time in the Alder Lake Thread
My PSU is a Phanteks Revolt X 1200W 80+ Platinum. So more then enough power to the Graphics card. The RX 6900 has 3 power connectors, and I connected 3 independent cables to the PSU.
I must confess that my Phanteks Evolv X Case (same as your's right?), after the PSU installed on place, has a very difficult access to the power connectors in the back. So definitively I will check that propperlly. Maybe one of the cables is not propperlly fitted. I must check that.
I only have 2 cards installed: the graphics card on first slot (where was before my vega 64) and the Fenvi card on second slot. I tried to remove the Fenvi card from second slot, because I remeber I had a few problems with fenvi card in one of the slots in the past (don't remember anymore which slot it was at that time) Also tried to move graphics card to slot 2, both tries did not solve the problem.
Thanks for the tip about the PEG adapter. I will try that option.
Meanwhile I have another problem :
Yesterday night I tried to chose diferente SMBIOS. After one of the boots bluetooth was not working, so disconnected power for a few seconds, after that I don't know what happened but my BIOS lost configuration. I had to configure Bios again. After that Hackintosh didn't boot. Also tried to boot with usb stick, but also that didn't worked. Is stuck on Apple logo after Opencore picker.
I must see what is happening....