Contribute
Register

[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

With F11o genuine or modded I have connected through Alpine Ridge a lot of USB 2 and USB 3 devices. Even sleep, wake work ok.
I’m on holiday now, but when I’ll come back I’ll post IOReg.
Ioreg on modded F11o for z390 Aorus Master. Thunderbolt and USB 2.0, 3.0 working. Sleep, wake, etc.
 

Attachments

  • 1.png
    1.png
    816.8 KB · Views: 49
  • 2.png
    2.png
    854.1 KB · Views: 47
  • 3.png
    3.png
    861.3 KB · Views: 46
  • 4.png
    4.png
    896.5 KB · Views: 45
  • 5.png
    5.png
    870.2 KB · Views: 41
  • 6.png
    6.png
    861.9 KB · Views: 48
For AppleVTD I combined my DMAR.aml with "Reserved Memory Region" from an genuine iMac19,1 dumped DMAR.aml. All working, also direct boot from OC to Windows and Ubuntu.
 

Attachments

  • SSDT-DMAR.aml
    136 bytes · Views: 74
Ioreg on modded F11o for z390 Aorus Master. Thunderbolt and USB 2.0, 3.0 working. Sleep, wake, etc.
Can you share your USB window from Hackintool?
ScreenShot-USB.jpg
 
For AppleVTD I combined my DMAR.aml with "Reserved Memory Region" from an genuine iMac19,1 dumped DMAR.aml. All working, also direct boot from OC to Windows and Ubuntu.
Very cool. I wonder which approach will work best? No reserved memory region, or genuine Mac reserved memory region. I guess time will tell!
 
@StefanAM,
When I run F11n, F11o or F11o patched bios, I lose the XHC3 ports. It looks like you have them as XHC2? You're running with an AR add-in card correct? Is your thunderbolt card running patched or stock firmware? I'm running patched NVM33 on a TRv2 card.
 
@StefanAM,
When I run F11n, F11o or F11o patched bios, I lose the XHC3 ports. It looks like you have them as XHC2? You're running with an AR add-in card correct? Is your thunderbolt card running patched or stock firmware? I'm running patched NVM33 on a TRv2 card.
1.Yes (I don't think it matters). 2.Yes. 3.Stock (just SSDT).
 
For AppleVTD I combined my DMAR.aml with "Reserved Memory Region" from an genuine iMac19,1 dumped DMAR.aml. All working, also direct boot from OC to Windows and Ubuntu.
Yes ! the memory regions seem compatibles, it's certainly the best way ;) good job
 
Hi @galisrule , in your ssdt I see "Oem Revision : 00000001". When you replace an acpi table, you must increase this number. Try to replace with "Oem Revision : 00000002".
ok will try that thanks
 
Back
Top