- Joined
- Sep 25, 2012
- Messages
- 98
- Motherboard
- Gigabyte Z390 Designare
- CPU
- i7 9700K
- Graphics
- RX 5700 XT
Just want to comment on this.
I checked CaseySJ's OC 0.6.4 folder. The OpenUsbKbDxe.efi driver is in the "drivers" folder, however, it is not activated. Meaning, it is not listed in the config.plist > UEFI > Drivers. He probably forgot to remove it. But there is no way that driver is doing something wrong to your boot picking. But I can't be certain.
Besides, KeySupport is enabled, so OpenUsbKbDxe.efi is not necessary, especially not for your system. So you may remove it, if you want to.
Thank you for pointing this out.Just want to comment on this.
I checked CaseySJ's OC 0.6.4 folder. The OpenUsbKbDxe.efi driver is in the "drivers" folder, however, it is not activated. Meaning, it is not listed in the config.plist > UEFI > Drivers. He probably forgot to remove it. But there is no way that driver is doing something wrong to your boot picking. But I can't be certain.
Besides, KeySupport is enabled, so OpenUsbKbDxe.efi is not necessary, especially not for your system. So you may remove it, if you want to.
You know I am going to refer to you automatically to the Sleep Aid...Sleep: my system will sleep when I force it from the apple menu, but not based on the sleep setting in system preferences--energy saver. my apple TB display sleeps after the proper interval, but the system continues to run.
the only USB device plugged in currently is the BT on my Fenvi card. I changed the setting on HS11 in the UAIC SSDT to external since I am using a USB splitter to connect both BT and the USB 2 ports on my case.
I tried unplugging the splitter from HS11 and still no schedule-based sleep.
I reconnected the splitter, then ran the terminal command to see what is preventing sleep.
the output is attached.
thanks in advance for any suggestions.
Some questions:Hi @CaseySJ,
I switched from Clover to OC but I was considering switching back to Clover due to booting issues. If I have a bootable backup, can I simply replace the EFI folder and add back the kexts in /L/E and be good to go? Or are there other steps I would need to take?
Thanks you for all of your help.
I'm running Catalina 10.15.7, OC 0.6.4.Some questions:
- Are you running Mojave or Catalina?
- What boot issues are you experiencing?
- Which version of OpenCore are you using?
- How often do the boot issues occur?
I see. You can certainly switch to Clover as follows:I'm running Catalina 10.15.7, OC 0.6.4.
We discussed the boot issue earlier in this thread but couldn't find a resolution. The issue is that on cold boots (not turning off the PSU, just if the computer has been shut down for a while), once the boot process is complete and the login screen should appear, the screen goes blank. If I do a warm reboot, then it will progress all the way through and the login screen will appear. It seems really odd but is very consistent and doesn't really make sense. The issue was never there when I was using Clover.