- Joined
- Aug 8, 2012
- Messages
- 32
- Motherboard
- Z390 Designare
- CPU
- i7-9700K
- Graphics
- RX 580
- Mac
- Mobile Phone
You're absolutely right!
I had moved the first jumper marked I2C/SPI to pins 2 and 3, thinking that was the SPI setting, but it needs to be connected to first two pins (closest to USB jack). Now flashrom can communicate with the device without any problem.
I used a multimeter to verify that all SPI pins are indeed 3.3V.
Good find!
View attachment 483816
@CaseySJ I moved both the voltage jumpers to the 3.3v position as the instructions appear to state that. I measured the voltage with a multimeter as well to be sure.
Glad you’ve got it working.