- Aug 3, 2013
- Asus N752VX-OpenCore
- i7-6700HQ / HM170
- HD 530 1920 x 1080
- Mobile Phone
Done. TB hot swap seems to work now, but there's a problem when sleeping or waking from sleep. Anyway, I've made some good progress. Time for more backups...not really, just copy and paste another Find and Replace and then copy and paste new info
Simply use OpenCore Configurator (OCC). Each version of this supports two specific versions of OpenCore so it’s necessary to use the right version. The title bar of OCC states the version being supported.
Ok, this is partial success… I see that a Thunderbolt SSDT is not attached. Please do that next. The SSDT should be adjusted for RP09.
Thanks, I used PlistEditPro. Don't like OCC. Much prefer OCAuxiliaryTools, but big find/replace operations are not its strong point.Simply use OpenCore Configurator (OCC). Each version of this supports two specific versions of OpenCore so it’s necessary to use the right version. The title bar of OCC states the version being supported.
This ACPI patch simply goes into the ACPI —> Patch section of OCC.
I've attached the file
@yabusa,All 19 tables, including the slot 2 disabler, loaded properly. The plot thickens. Will need to run some experiments on my test bench…
I gave the file a shot, but still no luck@yabusa,
After a little experimentation on my Z390 Designare with two AMD GPUs (RX580 in slot 1 and RX 5700 XT in slot 2), I was able to disable the RX 5700 XT (slot 2) with the attached SSDT.
Please give this a try.
CAUTION: Please monitor backplate temperature of the 'disabled' GPU with a temperature probe or thermal imaging probe. The card may remain powered although a driver won't attach to it. Periodically check to see if the disabled GPU's fans spin up to maintain a safe temperature.
Slot 1 and slot 2 versions of this SSDT are also posted here:
Hi, I have a problem with my VRS8 (I follow the guide for the VRS8). This is an intermittent problem. Sometimes, everything work good but sometimes I can't get logic (or other software) to receive an audio input. I can hear the audio input in hardware monitoring on the VRS8, i just can't get...www.tonymacx86.com