[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

[phrfpeixoto]

yes it does, it is on all systems

Indeed, I had looked in the wrong library folder.

Regardless,

...

The only differences I can see from one-another are:
- The new account was not an Admin
- My account has its home folder mapped to another Volume (Another APFS partition on the same disk)

I'll try to copy my data back to the system disk and undo that volume, and see if that makes any difference.

That last item seemingly did the trick: After a major hassle to switch my account's home folder back to /Users/peixoto, the computer now sleeps properly.

I find this VERY odd. The previous path was a volume within the system's container disk, named as Home (home dir was /Volumes/Home).
I originally did this move right before the BigSur upgrade - For the case I needed a clean install (that partition wouldn't be touched)

@CaseySJ Have you ever seen macOS installations/accounts with a different home folder? If so, did that cause any unwanted behavior?

I'll try and find some time to do the same on my real MacBook Pro running BigSur, and see what happens.

 

[Lukey1979]

Hi @CaseySJ I finally updated to OC 0.7.5 using the old manual method. Booted in Monterey OK however, both Ethernet ports on my Aorus Xtreme are not working. WiFI works OK and Bluetooth appears to be working fine. I'm wondering if I have missed something. ALL of my settings have been copied across to the new EFI this includes my ACPI folder. I haven't copied across the EFI to my main drive as yet as I wanted to make sure it was all working first. Has anyone else with the same MB experienced this?

 

[rondark]

Hi @CaseySJ
I am suffering from the Samsung 970 EVO (1 Tb) problem in Monterey. I bought a WD recommended SN 750 I TB to replace it.
I have searched and can't seem to find the proper method to clone the Samsung to the WD. I cloned using CCC - Samsung to WD. I then placed the EFI (OC .75) in the WD EFI partition. The WD is seen as uefi in the BIOS but it doesn't show up in the OC picker. However the old Samsung boot disc which I placed in a Sabrent Thunderbolt enclosure boots fine.
I also am not sure the Sabrent is connecting properly to Thunderbolt as I have previously only used the Thunderbolt ports for USB.

I have , again, probably done something stupid.

How should I proceed?

Thanks

 

[cylsfar]

Please post your config.plist with serial numbers removed from PlatformInfo section.

It's

i boot only with internal cpu graphics and it block

 

[JimmakoS]

Hi @CaseySJ
I am suffering from the Samsung 970 EVO (1 Tb) problem in Monterey. I bought a WD recommended SN 750 I TB to replace it.
I have searched and can't seem to find the proper method to clone the Samsung to the WD. I cloned using CCC - Samsung to WD. I then placed the EFI (OC .75) in the WD EFI partition. The WD is seen as uefi in the BIOS but it doesn't show up in the OC picker. However the old Samsung boot disc which I placed in a Sabrent Thunderbolt enclosure boots fine.
I also am not sure the Sabrent is connecting properly to Thunderbolt as I have previously only used the Thunderbolt ports for USB.

I have , again, probably done something stupid.

How should I proceed?

Thanks

I had the same problem. I use superduper to clone my drive and everything it's ok now.

 

[NCMacGuy]

Hi @CaseySJ
I am suffering from the Samsung 970 EVO (1 Tb) problem in Monterey. I bought a WD recommended SN 750 I TB to replace it.
I have searched and can't seem to find the proper method to clone the Samsung to the WD. I cloned using CCC - Samsung to WD. I then placed the EFI (OC .75) in the WD EFI partition. The WD is seen as uefi in the BIOS but it doesn't show up in the OC picker. However the old Samsung boot disc which I placed in a Sabrent Thunderbolt enclosure boots fine.

@rondark

When you made the CCC clone to the WD did you make sure CCC also cloned all the System files? By default CCC only clones everything except System. Maybe that's why OC Picker doesn't show the WD as a bootable drive.

 

[JimmakoS]

Just completed the replacement of Samsung 970 Evo 250GB to WD SN750 250GB. My boot time now from the picker menu is 17 seconds! Thanks everyone for the suggestion.

 

[rondark]

@rondark

When you made the CCC clone to the WD did you make sure CCC also cloned all the System files? By default CCC only clones everything except System. Maybe that's why OC Picker doesn't show the WD as a bootable drive.

Is it a setting in CCC?

 

[tedyun]

Hi @CaseySJ
I am suffering from the Samsung 970 EVO (1 Tb) problem in Monterey. I bought a WD recommended SN 750 I TB to replace it.
I have searched and can't seem to find the proper method to clone the Samsung to the WD. I cloned using CCC - Samsung to WD. I then placed the EFI (OC .75) in the WD EFI partition. The WD is seen as uefi in the BIOS but it doesn't show up in the OC picker. However the old Samsung boot disc which I placed in a Sabrent Thunderbolt enclosure boots fine.
I also am not sure the Sabrent is connecting properly to Thunderbolt as I have previously only used the Thunderbolt ports for USB.

I have , again, probably done something stupid.

How should I proceed?

Thanks

@rondark

CaseySJ recently described how to make a bootable back up of the newer macOS's

[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

Thanks @CaseySJ Before migrating data to the new hard drive, I would like to check with you guys: Your preferred File System when using it both for Windows & macOS. Until now I've been using NTFS as the native format for Windows, and Paragon NTFS for Mac as a driver to read and write to them...

www.tonymacx86.com

 

[rondark]

@rondark

When you made the CCC clone to the WD did you make sure CCC also cloned all the System files? By default CCC only clones everything except System. Maybe that's why OC Picker doesn't show the WD as a bootable drive.

@CaseySJ

Fixed the boot issue. Thanks for that.
Another issue...with Thunderbolt. I purchased a Sabrent Thunderbolt 3 to NVME dual enclosure. I placed my old Samsung boot disc in this and another Samsung NVME that I had in a USB3.1 enclosure which was plugged into one of the Thunderbolt ports and worked fine.
So...Sabrent plugged in to Thunderbolt port where USB 3.1 enclosure had been.LogitechStreamCam(USB 3.1) plugged into other TB port.
The old boot disk in the Sabrent shows and, in fact, booted. The camera works. However the second drive in the Sabrent doesn't show. In Hackintool the second XHC3 port shows unknown.
I have not used a Thunderbolt device before on this computer so I'm stumped.