[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

[Errabundo]

Thank you very much @CaseySJ it worked perfectly... !!!!!!

Hello.
I have exactly the same issue that @Rag.

I'm not doing a fresh install. Just updating from Big Sur, with Opencore 0.7.4 directly from the BigSur HD (ADATA SX8200PNP).

I already had the SecureBootMode = Disabled.

After the first re-boot, there are 2 Macintosh HD drives at the Clover boot. The first one is the Monterrey installation.
I press on it, and it begins with the Apple logo bar, and after a few seconds, the system reboots.
It keeps re-booting for always.

If I choose the second Macintosh HD, it's the BigSur normal drive, and it boots OK, but with BigSur.

I tried the verbose mode (CMD+V), but the text is appearing very quickly and at the end it disappears without time to do a Screen-shot.

Any idea what's happening?
Thank you.

 

[faithie999]

I tried the verbose mode (CMD+V), but the text is appearing very quickly and at the end it disappears without time to do a Screen-shot.

Any idea what's happening?
Thank you.

make a video recording of the verbose boot, then review the video, scroll down to the end of the boot where it might show the issue, then clip that part of the video and post it.

 

[cylsfar]

hi

i have installed HackinDrom 2.0.5 it is solved beta oc

and it is writing correctly OC 0.7.4

 

[Errabundo]

make a video recording of the verbose boot, then review the video, scroll down to the end of the boot where it might show the issue, then clip that part of the video and post it.

Wow, what a system! I thought there was a way of getting the log file anywhere!.

I have made the video and that's the last lines before the reboot:

 

[CaseySJ]

Holy smokes, I got around to playing a 4K video recorded on my phone... It cannot play without major stuttering in both VLC and Quicktime (like 1 frame per 10 seconds). Sigh... more reading to do. I've done some video editing in the past, so at some point, something broke (on the 0.7.4 OC update, I used hackindrom since my config was a bit old, and I had some USB issues in the not too distant past).

The video was h265 HEVC

To check whether hardware support for HEVC is available, we can download and run VideoProc, then open its Settings dialog (Hardware Info). Here’s an example:

[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

@CaseySJ Magic Keyboard 2 isn't working in Open Canopy when its connected by USB. The solution is to delete UsbKbexi driver and from config.plist also be sure KeySupport is enabled in Input section The OpenCore 0.6.3 EFI for Z390 Designare already contains that configuration.

www.tonymacx86.com

 

[CaseySJ]

Wow, what a system! I thought there was a way of getting the log file anywhere!.

I have made the video and that's the last lines before the reboot:

View attachment 532579View attachment 532581

Hello @Errabundo

What is the make/model of your macOS NVMe SSD? Try disabling “NVMeFix.kext” from Kernel section of config.plist.

 

[Errabundo]

hi

i have installed HackinDrom 2.0.5 it is solved beta oc

and it is writing correctly OC 0.7.4

I also updated HackinDrom to 2.0.5 and OC is 0.7.4... Thx.

Hello @Errabundo

What is the make/model of your macOS NVMe SSD? Try disabling “NVMeFix.kext” from Kernel section of config.plist.

I have an ADATA SX8200PNP.
I'll try disabling that just now.

 

[CaseySJ]

I also updated HackinDrom to 2.0.5 and OC is 0.7.4... Thx.

I have an ADATA SX8200PNP.
I'll try disabling that just now.

If that does not help, please try:

• Check if ADATA SSD has more than 50GB free
• Set SecureBootModel = Default
• At OpenCore Picker, check that bottom right corner says REL-074-(date)
• Start the upgrade again from “System Preferences —> Software Update”

 

[CaseySJ]

Wow, what a system! I thought there was a way of getting the log file anywhere!.

I have made the video and that's the last lines before the reboot:

View attachment 532579View attachment 532581

After looking at this more carefully, it seems that real error or panic occurred one or two pages before. If you have the video, scrub the playhead back a couple of pages to see if there’s a kernel panic or other issue.

I wonder if a third party kernel extension that works in Big Sur might be broken in Monterey.

 

[Errabundo]

Hello @CaseySJ.
Thank you for your help.
I add two more images, but the font size is very little and the video is not very clear when the lines are moving up because of the refreshing rate.

Is there any way of making the verbose font greater?