[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

[plattine]

Please try enabling VT-d in BIOS. If that does not help, then it’s necessary to disable AppleVTD by following a short procedure described in the link that appears in the Mini-Guide for OpenCore 0.7.3.

It worked by enableing VT-d in BIOS. But with following notes:
-it only worked after I reset NVRAM again
-Windows only boots up on the second try after the machine was booted in MacOS (if that makes sense )

I didn't disable AppleVTD, for now I just live with having to do two boot ups to start windows.

thank you again.

 

[BOTMT]

I didn't find the complete EFI
Maybe I'm too stupid!

Have you been able to get your EFI / working?

I don't think (I could be wrong) just using someone else's EFI is a good idea. There are specific bits of information you need for your particular board, cards, and configuration. There is a lot of info here about that on CaseySJ's thread. It will just take patience, reading, and research to figure out how to do it. Once you get kind of close, there are many people here willing to help you out.

 

[BOTMT]

I believe it’s only necessary to enable Intel Platform Trust Technology (PTT). Secure Boot can remain disabled in BIOS.

Once again thank you very much @CaseySJ (and all who replied), for the excellent help and support!

Once I Disabled Secure Boot, Open Core appeared again.

However, when going into Windows 11, it went through a "Configuring devices" process, but afterwards did go into Windows 11, which I'm working in now.

I got my Windows 11 from the Microsoft Dev Channel, currently on:
Version 21H2
OS build 22000.194
Experience Windows Feature Experience Pack 1000.22000.194.0

So at this time I am not certain if Secure Boot being Disabled is being allowed, but with the to be released next month version may demand Secure Boot be Enabled. I guess we shall soon see.

 

[doof]

Just updated to OC 0.7.3

With CpuTscSync 1.0.4 enable, my build can't wake up from sleep

I also experienced inability to wake with puTscSync. I get a hang on wake with kernel stack corruption. Disabling the kext seems to get everything working again.

Spoiler: crash

panic(cpu 0 caller 0xffffff8018ac0e72): "Kernel stack memory corruption detected"@/AppleInternal/BuildRoot/Library/Caches/com.apple.xbs/Sources/xnu/xnu-6153.141.40/libkern/stack_protector.c:37 Backtrace (CPU 0), Frame : Return Address 0xffffff8754e73a40 : 0xffffff801831c5dd mach_kernel : _handle_debugger_trap + 0x49d 0xffffff8754e73a90 : 0xffffff8018456d45 mach_kernel : _kdp_i386_trap + 0x155 0xffffff8754e73ad0 : 0xffffff80184488ce mach_kernel : _kernel_trap + 0x4ee 0xffffff8754e73b20 : 0xffffff80182c2a40 mach_kernel : _return_from_trap + 0xe0 0xffffff8754e73b40 : 0xffffff801831bca7 mach_kernel : _DebuggerTrapWithState + 0x17 0xffffff8754e73c40 : 0xffffff801831c097 mach_kernel : _panic_trap_to_debugger + 0x227 0xffffff8754e73c90 : 0xffffff8018ac0f1c mach_kernel : _panic + 0x54 0xffffff8754e73d00 : 0xffffff8018ac0e72 mach_kernel : _mac_exc_action_check_exception_send + 0x3a2 0xffffff8754e73d10 : 0xffffff80182df8b9 mach_kernel : ___stack_chk_fail + 0x9 0xffffff8754e73d20 : 0xffffff80189ece33 mach_kernel : _IOHibernateSystemHasSlept + 0x4c3 0xffffff8754e73d40 : 0xffffff8018a845ba mach_kernel : __ZN14IOPMrootDomain15powerChangeDoneEm + 0xafa 0xffffff8754e73de0 : 0xffffff8018a15757 mach_kernel : __ZN9IOService8all_doneEv + 0x767 0xffffff8754e73e50 : 0xffffff8018a124ec mach_kernel : __ZN9IOService23actionPMWorkQueueInvokeEP11IOPMRequestP13IOPMWorkQueue + 0x86c 0xffffff8754e73ea0 : 0xffffff8018a0fb80 mach_kernel : __ZN13IOPMWorkQueue17checkRequestQueueEP11queue_entryPb + 0xa0 0xffffff8754e73ef0 : 0xffffff8018a0fa19 mach_kernel : __ZN13IOPMWorkQueue12checkForWorkEv + 0xc9 0xffffff8754e73f30 : 0xffffff8018a2b27e mach_kernel : __ZN10IOWorkLoop15runEventSourcesEv + 0x11e 0xffffff8754e73f70 : 0xffffff8018a2a876 mach_kernel : __ZN10IOWorkLoop10threadMainEv + 0x36 0xffffff8754e73fa0 : 0xffffff80182c213e mach_kernel : _call_continuation + 0x2e BSD process name corresponding to current thread: kernel_task Boot args: keepsyms=1 debug=0x100 alcid=11 shikigva=80 igfxfw=2 Mac OS version: 19H1417 Kernel version: Darwin Kernel Version 19.6.0: Tue Aug 24 20:28:00 PDT 2021; root:xnu-6153.141.40~1/RELEASE_X86_64

 

[TheWiggler]

I was finally able to dump this ROM properly. I don't think anyone has uploaded it yet. This was taken today from a brand new, Gigabtye GC-Titan Ridge Rev 2.0. It should be firmware 50, but the 50 version in the repository is different. I believe it may be from a Rev 1.0, I'm not sure.

 

[TheWiggler]

I just analyzed the two, they might be the same. Please double-check, if it is then it's mislabeled as Rev 1.0.

 

[Vorshim92]

Hi, @CaseySJ,
May I ask for a suggestion? I download with HackinDROM your EFI for Designare Z390 open intel for my PC on which I was using Clover, but it's not working. Every time I try to start Mojave with OpencCore crashes immediately after 3 rows of verbose. I tried everything. There wasn't an emulated NVRAM. I already deleted any hack kext from L/E and rebuilt the cache and nothing. any suggestion?

 

[Vorshim92]

Hi @CaseySJ
May I ask for a suggestion? I download with HackinDROM your EFI for Designare Z390 open intel for my PC on which I was using Clover, but it's not working. Every time I try to start Mojave with OpencCore crashes immediately after 3 rows of verbose. I tried everything. There wasn't an emulated NVRAM. I already deleted any hack kext from L/E and rebuilt the cache and nothing. any suggestion?

OK. it was Securebootmode enabled. So my question is, Can I use Open Intel with securebootmodel disabled? because right now with securebootmodel disabled I can't see wifi and Bluetooth is working but I can't see my Apple magic mouse.

 

[bidouilleur]

Hello everyone
I think somehow I did some messing with my machine and now I can't get it going whatever I try (limited knowledge for sure)
It was installed long ago with Clover but I migrated to OpenCore. Recently used HackinDROM and all was ok but yesterday once more looking at OpenCore app and HackinDROM to have both at latest since I read you had to to avoid problems. I did but before launching most recent OSx update (Big Sur) rebooted the box and ... did F12 and I see my hdd and backup SSD but whatever I choose I get this. Hence this seems more a lower end problem even before the drive is loaded. While messing in F12 and choosing a bootable USB drive I do once again see the clover menu (though I followed the guide to get rid of it) Wonder if this is finally messing things up to a point of no more bootable disks ? And as said my knowledge is limited in the hack world. Used to macs since 1988 ... Where do I start to look for the problem ??? So yes thanks for the help.

Z390
I9
nvme disk as primary
ssd with a BU samsung (worked in the past)
ram 64 etc etc

 

[Feartech]

Hello everyone
I think somehow I did some messing with my machine and now I can't get it going whatever I try (limited knowledge for sure)
It was installed long ago with Clover but I migrated to OpenCore. Recently used HackinDROM and all was ok but yesterday once more looking at OpenCore app and HackinDROM to have both at latest since I read you had to to avoid problems. I did but before launching most recent OSx update (Big Sur) rebooted the box and ... did F12 and I see my hdd and backup SSD but whatever I choose I get this. Hence this seems more a lower end problem even before the drive is loaded. While messing in F12 and choosing a bootable USB drive I do once again see the clover menu (though I followed the guide to get rid of it) Wonder if this is finally messing things up to a point of no more bootable disks ? And as said my knowledge is limited in the hack world. Used to macs since 1988 ... Where do I start to look for the problem ??? So yes thanks for the help.

Z390
I9
nvme disk as primary
ssd with a BU samsung (worked in the past)
ram 64 etc etc

you need to compare your config.plist with the sample.plist and make the needed adjustments