[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

[CaseySJ]

Could you try, on BIOS setting, enabling Thunderbolt Vt-d security and change to Boot once ?

Belkin Thunderbolt 3 Dock Pro is working now in Windows 10 with the two BIOS changes (Thunderbolt Vt-d Security enabled, and Thunderbolt Boot Support --> Boot Once)!

Now going to reboot and check PowerColor Gaming Station X eGPU...

Update: PowerColor Gaming Station X not working in Windows (P.S. I don't care )

 

[Elias64Fr]

Belkin Thunderbolt 3 Dock Pro is working now in Windows 10 with the two BIOS changes (Thunderbolt Vt-d Security enabled, and Thunderbolt Boot Support --> Boot Once)!

Now going to reboot and check PowerColor Gaming Station X eGPU...

Update: PowerColor Gaming Station X not working in Windows (P.S. I don't care )

That's right, we don't care about an eGPU on a Hackintosh with 3 long port Pcie (.. and about windows ) !

For information, I have all my eGPU box onboard devices working. I have the following windows drivers and have to wait long time (around 1 mn on windows desktop) :

Intel Corp.
12/04/2020
1.41.890.0

 

[dehjomz]

You guys are making excellent progress, and just wanted to cheer you all on.

 

[CaseySJ]

That's right, we don't care about an eGPU on a Hackintosh with 3 long port Pcie (.. and about windows ) !

For information, I have all my eGPU box onboard devices working. I have the following windows drivers and have to wait long time (around 1 mn on windows desktop) :

Intel Corp.
12/04/2020
1.41.890.0

Just to clarify: All of my Thunderbolt devices (including eGPU) work in macOS with the flashed Titan Ridge firmware. I believe these devices will work in Windows with the original firmware.

 

[CaseySJ]

** Looking for one LG UltraFine 5K and one Apple Thunderbolt Display Owner **​

Reason:

• To install modified BIOS (via Q-Flash in BIOS Setup) containing Apple Thunderbolt drivers and check:
  

  • Whether Thunderbolt monitor powers on doing BIOS and OpenCore Picker​
  • Whether Thunderbolt monitor's on-board devices are functional during BIOS and OpenCore Picker​
  • Whether Thunderbolt monitor is more reliable in any way than before​

Prerequisites:

• Must own Gigabyte Z390 Designare Hackintosh running Mojave, Catalina, or Big Sur
• Boot loader must be OpenCore
• Must be running BIOS F9i (either the official F9i or one of Elias' modified versions)
• Must own either (a) LG UltraFine 5K or (b) Apple Thunderbolt Display
• LG UltraFine 5K can be either latest model (27MD5KLB-B) or previous version (27MD5KL-B)

Ideally you should have 75 or more posts so that Private Messaging is open to you.

 

[akanewb]

@CaseySJ hi.
Is there any way to enable TB for Antelope Audio on Clover? I have Orion32+ Gen3 and Orion Studio SC for testing.

 

[jiffyslot]

Good to know everything works in Mojave! This could be an option for Antelope Audio users if we cannot solve the Ethernet and WiFi problems under Big Sur with AppleVTD.

I wonder if everything will also work under Catalina with AppleVTD enabled.

I'm going to try that later today: I've been trying to get a nearly identical system (19,1 on the Z390 and iMP 1,1 on the Z370) running on the Z370 Aorus Gaming 7 with the i7 8700K. I'm trying to fix En0 and I can't figure out how to get the RX580 low-power patch to work on that system.

Update: Fixed En0 with:

sudo rm /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
sudo rm /Library/Preferences/SystemConfiguration/preferences.plist

Now verifying/replicating via a different Mojave clone, then on to Catalina and from there a BigSur update and test on the Z370. This system is on 0.6.0 and I'm going to try to update a test EFI to 0.7.0.

 

[CaseySJ]

@CaseySJ hi.
Is there any way to enable TB for Antelope Audio on Clover? I have Orion32+ Gen3 and Orion Studio SC for testing.

Hello again @3908700,

Looks like we found our own solution to the Antelope problem! Yes it is possible to do this with Clover.

• Which version of macOS are you running?
• Which version of BIOS is currently installed?

If you can post your Clover config.plist (but remove serial numbers from SMBIOS section) I can tell you what changes to make.

 

[yosoyoco]

Hello, still no luck with the network connections... I tried every things you told me, then I tried a complete bios reset / new opencore config with basic settings. No changes... but everything works under Win10. The last thing that I can try is to reinstall macOS with VT-D enabled...

 

[CaseySJ]

Hello, still no luck with the network connections... I tried every things you told me, then I tried a complete bios reset / new opencore config with basic settings. No changes... but everything works under Win10. The last thing that I can try is to reinstall macOS with VT-D enabled...

No need to reinstall macOS at this time. What we know:

• Elias --> no problem (flashed Titan Ridge firmware)
• Inqnuam --> no problem (flashed Titan Ridge firmware)
• Me --> no problem (flashed Titan Ridge firmware)
• We are all running Big Sur 11.4 or 11.5

So what differences might exist on your system?

• Please list the makes and models of all components installed inside the system.
• And list all components connected to the outside of the system via USB or Thunderbolt.
• Which version of macOS are you running?
• Was this version of macOS installed from scratch or upgraded from an earlier version?
• What system product name are you using (iMac19,1 or iMacPro1,1 or something else)?
• Is your Titan Ridge firmware flashed (to enable Thunderbolt Bus)?