[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

[cylsfar]

[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

Sounds like signal interference. If there are metal objects in the line of sight between the WiFi/BT antennas and Apple Mouse, those objects can interfere. Some interference is also possible from 2.4GHz WiFi networks. I don't think anything changed lately in my desk and surrounding. I thought...

www.tonymacx86.com

I followed all of the instructions but when I select the internal macOs Disk using the bootable usb it stays in the loading apple page and doesn't go forward is it ok?

Try to do like me update lastest Firmware and load bios default optimized and bios config and try

 

[Inqnuam]

[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

Sounds like signal interference. If there are metal objects in the line of sight between the WiFi/BT antennas and Apple Mouse, those objects can interfere. Some interference is also possible from 2.4GHz WiFi networks. I don't think anything changed lately in my desk and surrounding. I thought...

www.tonymacx86.com

I followed all of the instructions but when I select the internal macOs Disk using the bootable usb it stays in the loading apple page and doesn't go forward is it ok?

Theres no reason to dont use OpenCore 0.6.3, so its better to follow this guide
But before, update your Bios to F9g, then configure Bios parameters like in Post #1
or update your Bios to F9i then configure Bios parameters like in Post #1 + disable CFG-Lock from Bios.

Bios settings in Post #1:

 

[Inqnuam]

Try to do like me update lastest Firmware and load bios default optimized and bios config and try

Can you now boot into macOS with my EFI - Test folder ?

 

[Tommygra01]

I found the guide to the open core 0.6.3 in this tread and used it and now it works (before I was using the 0.6.2 guide)
Thank you for your help

 

[tsamy]

Here is my EFI Folder all update 0.6.4 with Bluetooth working, just use ur config.plist

I have used ur EFI, face the same issue stuck on apple logo
I need to enable built in wifi and Bluetooth, im using amd rx580

 

[Inqnuam]

I have used ur EFI, face the same issue stuck on apple logo
I need to enable built in wifi and Bluetooth, im using amd rx580

Have you updated your Bios?
CFG-Lock disabled?

 

[Tommygra01]

[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

Yes it’s really just that simple. However, those using OpenIntelWireless drivers must first set Misc —> Security —> SecureBootMode to Disabled (not Default). When the upgrade is done they can set this back to Default. Thats amazing news, right I'll get to it! Thanks again for the help, this...

www.tonymacx86.com

I tried to download the software update but when the download is finished it says an error has verified and the computer can't install the update
Any solutions available?

 

[cylsfar]

Can you now boot into macOS with my EFI - Test folder ?

Yes! A great thanks! It is with your EFI Test folder and my config.....

 

[Tommygra01]

[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

Yes it’s really just that simple. However, those using OpenIntelWireless drivers must first set Misc —> Security —> SecureBootMode to Disabled (not Default). When the upgrade is done they can set this back to Default. Thats amazing news, right I'll get to it! Thanks again for the help, this...

www.tonymacx86.com

I tried to download the software update but when the download is finished it says an error has verified and the computer can't install the update
Any solutions available?

It seems I found a solution. I’ll test it for now.
nothing same problem
Any solution?
I'm the only one with this problem?

 

[REXXVER]

I'm using the Titan ridge I bought on eBay for the Mac pro 5,1.

Now I'll switch to Hacintosh.

Does the hot swap apply if I use Titan Lizzie I bought on eBay on the main board of gigabytes?

For your information, the 'Titan Rigid' I purchased is the 23.0 firmware version.

If the node is not enabled, you want to purchase Vision D. Please tell me the answer.