Contribute
Register

[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

tonybeatle said:
I've been having problems with slow network speed with booth WiFi and Ethernet. I've followed your guide and installed the kext files to the EFI drive. Here is a list of my parts

CPU: i9-9900K
Motherboard: Gigabyte Z390 DESIGNARE
Memory: Crucial 64 GB (4 x 16 GB) DDR4-2133 CL15 Memory
Video Card: Sapphire Radeon RX 5700 XT 8 GB NITRO+ Video Card
Wireless Network Adapter: TP-Link Archer T9E PCIe x1 802.11a/b/g/n/ac Wi-Fi Adapter

Hackintosh Ethernet Speed - 8Mbps/18.6Mbps
Hackintosh WiFi Speed - 12Mbps/11Mbps
Windows Ethernet Speed - 60Mbps/10Mbps
Windows WiFi Speed - 200Mbps/306Mbps
Click to expand...
Unfortunately I'm not familiar with the TP-Link T9E. This build guide recommends the Fenvi FV-T919 or FV-HB1200. Have you searched TonyMac or the Internet for possible solutions to this problem?
 
macmaxxx said:
CaseySJ, on "Fresh Intallation for Catalina 10.15.4 Guide", here : "Catalina 10.15.4 Fresh Install.zip" .... but I've downloaded and installed on USB Install key the Catalina 10.15.7 ....? It's Ok for always use this zip?
Click to expand...
Yes it's okay to use that Zip with any version of Catalina from 10.15.4 onwards.
 
@CaseySJ , hmm ran 0.5.7 - 0.6.1 without a hitch, now having a few problems with 0.6.2 in works fine until Apple logo, then no progress bar. I'm just trying to -v verbose now but proving difficult, anybody else with this or is it possibly the new 0.7.6 USBInject ?? Just thought I'd ask whilst I tinker in plist

EDIT: Solved. A Typo in a kext.
 
Last edited:
My Build
Z390 DESIGNARE |  i9 9900K |  Radeon Other
ziggenpuss said:
@CaseySJ , hmm ran 0.5.7 - 0.6.1 without a hitch, now having a few problems with 0.6.2 in works fine until Apple logo, then no progress bar. I'm just trying to -v verbose now but proving difficult, anybody else with this or is it possibly the new 0.7.6 USBInject ?? Just thought I'd ask whilst I tinker in plist

EDIT: Solved. A Typo in a kext.
Click to expand...
Is the typo present in the OpenCore 0.6.2 Zip that I posted?
 
Hi all!

Updating clover to 5123 gave the common Quirks issue so I downgraded. Might need to switch to OC at some point, just haven't had the time. Anyone knows if a new version will autodetect the current setup and not break the previous plist?

More importantly though, the "install OSX" partition doesn't show up in Clover when I'm updating to 10.15.7. Any ideas here?
 
Main
Z390 DESIGNARE |  i7 9700K |  HD 630
skulaksiz said:
Hi all!

Updating clover to 5123 gave the common Quirks issue so I downgraded. Might need to switch to OC at some point, just haven't had the time. Anyone knows if a new version will autodetect the current setup and not break the previous plist?

More importantly though, the "install OSX" partition doesn't show up in Clover when I'm updating to 10.15.7. Any ideas here?
Click to expand...
use OpenCore instead
 
Just tried the 0.6.2 mini-guide and get a black screen. Is that guide enough or should it be followed by the sticky guide from the first page?

I only get the three options: Windows, EFI, openshell.efi, keyboard strokes aren't accepted, and after a few seconds of the "picker", I get black screen...
 
Last edited:
Main
Z390 DESIGNARE |  i7 9700K |  HD 630
@CaseySJ
Hi.
Can you please tell me what I need to change after switching to the GPU?
I have been using the iGPU for over a year. I have now bought the rx570.
I don't have JPG preview working now.
Defined as Mac mini (2018).

Thank you!
 
You must log in or register to reply here.
Copyright © 2010 - 2023 tonymacx86 LLC
Back
Top