Contribute
Register

[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580

Sure, it's a good idea to see if the bootable backup disk still works.

Also try CMOS Reset and configure BIOS parameters once again. This will also require unlocking MSR 0xE2 if it was previously unlocked.
Last night, the system failed to start after I cleared CMOS. I then started the system with a backup and replaced it with OsxAptioFix2Drv-free2000.efi, and the system started normally. I'll unlock CFG your way right away. Replace it again with the OcQuirks.efi three-piece set. OK, my Mojave's back. However, the usb drive still can't start as my upgrade, the same display kernel crashes
 

Attachments

  • IMG_7313.JPG
    IMG_7313.JPG
    201.9 KB · Views: 34
  • IMG_7315.JPG
    IMG_7315.JPG
    187.2 KB · Views: 38
But I only saw F9h there, I saved F9g last week, please see attachment.
With F9h available can we say F9g is stable enough and will be officially released soon?
 
*** OpenCore 0.5.7 / 0.5.8 / 0.5.9 Mini-Guide for Designare Z390 ***

can i use this ^^^ guide also to build my first dualboot hackintosh but with Mojave and not Catalina:
Z390 Designare
i9 9900k
vega 56 (or rx590 it depends what I can get due to the out of stocks of radeon cards here)
G.Skill Aegis DIMM Kit 32GB, DDR4-3200
Crucial P1 SSD 1TB, M.2
Samsung evo850 1tb (for win10)
Corsair TX-M Series Modular TX750M

I want to go open core bc all say its the future, its harder to setup but i would go over it.
My suggestion: If you're new to hackintosh builds, don't dive in too deep from the start.

I would start with Casey's well-written Clover-based guide to get Mojave installed on your system. This takes out many of the pitfalls you can encounter, and it will be easier to find solutions in this thread for issues you run into.

Reading and following the guide also helps to educate and familiarize yourself with many aspects of installing and configuring yor hackintosh and getting your system working properly.

Then (once you have your system running as it should, and having acquired more knowledge and experience in the process) you can test booting into your existing Mojave installation from a USB drive with OpenCore bootloader.

You can always switch from Clover to the OpenCore bootloader, so it's not a choice you make once and get stuck with forever.
 
Last edited:
Hi Guys,
I would like to try something but I don't manage to do it. I want to activate hardware encoder in Adobe Media Encoder with H264. So I follow the guide for IGPU in Headless Mode Setting. But when I want to activate Hardware render in Adobe, it says that my hardware configuration can't use hardware render setting ! But the Intel Core i9 9900k is listed to work with hardware encoder/decoder and Quick Sync.
Is anybody, have manage to activate hardware encoding with adobe ?
 
hello I made it appear but my apollo tells me that the triber is not properly installed what can I do
Thunderbolt Bus:





Vendor Name: GIGABYTE


Device Name: iMac Pro


UID: 0x00ED0482A1405400


Route String: 0


Firmware Version: 33,0


Domain UUID: 16DC2952-48B6-4FE0-8948-15489DE2A53C


Port:


Status: Device connected


Link Status: 0x2


Speed: Up to 10Gb/s x1


Current Link Width: 0x1


Receptacle: 1


Cable Firmware Version: 1.0.16


Cable Serial Number: C4M733201LFF798AZ


Link Controller Firmware Version: 1.99.0


Port:


Status: No device connected


Link Status: 0x7


Speed: Up to 20Gb/s x2


Current Link Width: 0x1


Receptacle: 2


Link Controller Firmware Version: 1.99.0





Apollo Twin:





Vendor Name: Universal Audio, Inc.


Device Name: Apollo Twin


Vendor ID: 0x1176


Device ID: 0x2


Device Revision: 0x1


UID: 0x1176000200040270


Route String: 1


Firmware Version: 7,1


Port (Upstream):


Status: Device connected


Link Status: 0x2


Speed: Up to 10Gb/s x1


Port Micro Firmware Version: 2.0.7


Cable Firmware Version: 1.0.16


Cable Serial Number: C4M733201LFF798AZ
 
hello I made it appear but my apollo tells me that the triber is not properly installed what can I do
Thunderbolt Bus:





Vendor Name: GIGABYTE


Device Name: iMac Pro


UID: 0x00ED0482A1405400


Route String: 0


Firmware Version: 33,0


Domain UUID: 16DC2952-48B6-4FE0-8948-15489DE2A53C


Port:


Status: Device connected


Link Status: 0x2


Speed: Up to 10Gb/s x1


Current Link Width: 0x1


Receptacle: 1


Cable Firmware Version: 1.0.16


Cable Serial Number: C4M733201LFF798AZ


Link Controller Firmware Version: 1.99.0


Port:


Status: No device connected


Link Status: 0x7


Speed: Up to 20Gb/s x2


Current Link Width: 0x1


Receptacle: 2


Link Controller Firmware Version: 1.99.0





Apollo Twin:





Vendor Name: Universal Audio, Inc.


Device Name: Apollo Twin


Vendor ID: 0x1176


Device ID: 0x2


Device Revision: 0x1


UID: 0x1176000200040270


Route String: 1


Firmware Version: 7,1


Port (Upstream):


Status: Device connected


Link Status: 0x2


Speed: Up to 10Gb/s x1


Port Micro Firmware Version: 2.0.7


Cable Firmware Version: 1.0.16


Cable Serial Number: C4M733201LFF798AZ
May I ask what a triber is? Driver??
 
Back
Top