- Joined
- Jan 3, 2013
- Messages
- 6
- Motherboard
- GA-z77n-wifi
- CPU
- i7 3770K
- Graphics
- Geforce GT 640
- Mac
- Classic Mac
- Mobile Phone
Thank you so much for this guide!! I have a similar setup to you, i7 3770k 16GB Vengeance RAM, GA-Z77N-WIFI, MSI 660 Ti 2GB, and the H60.
Not sure why, but every time I used Multibeast 5.2.1 and and tried using the DSDT (or even without a DSDt and just checking the option on), I wouldn't be able to reach the login screen. I would remain stuck at a point between where Verbose text no longer shows, and the login screen is supposed to fade in. Real question is, do I even need a DSDT?
I've also lately had problems with my bootloader and can only boot using the unibeast USB. Looks like either a new install or try fixing it inside Mountain Lion.
Anyway, what's the advantage of iMac 12,2 definitions compared to any of the others?
Hi !
I just built a similar setup (z77n WIFI, GA-GTX-660Ti- i7 3770 and 16GB VENGEANCE RAM, 128 GB SSD, 1TB HDD).
I got to the install screen og my USB Unibeast by booting in safe mode, and got to install ML in my SSD)
The things is after i reboot, it will only log in in safe mode, and i can't find what settings do i ahve to use with Multibeast.
I m a noob at this stuff, so could you (or anyone) help me with this post installation set up?
I'd like to know what to do to get audio (Realtek AC'97), Ethernet, and make my ML install bootable without problems
Thank you very much for your help!!
EDIT: I got it, It works now for me, i thing it was for the most part some settings in the BIOS i hadn't set up right and to use the Z77N DSDT found in the DSDT Database + GraphicsEnable=No. Thanks anyway!
Hi !
I just built a similar setup (z77n WIFI, GA-GTX-660Ti- i7 3770 and 16GB VENGEANCE RAM, 128 GB SSD, 1TB HDD).
I got to the install screen og my USB Unibeast by booting in safe mode, and got to install ML in my SSD)
The things is after i reboot, it will only log in in safe mode, and i can't find what settings do i ahve to use with Multibeast.
I m a noob at this stuff, so could you (or anyone) help me with this post installation set up?
I'd like to know what to do to get audio (Realtek AC'97), Ethernet, and make my ML install bootable without problems
Thank you very much for your help!!
EDIT: I got it, It works now for me, i thing it was for the most part some settings in the BIOS i hadn't set up right and to use the Z77N DSDT found in the DSDT Database + GraphicsEnable=No. Thanks anyway!
Hi Salch - about to do a near identical build to you - Z77N, i5, EVGA-GTX-660Ti
Do you definitely need the DSDT for the Z77N? I'd heard you could get away without it using UEFI?
Hey Jimb77
IT 's been a while now and i haven't got a single problem...
In any case, i recommend you to try without the DSDT file, it might work... it just happened that i tried at the same time the custom DSDT + some changes in the BIOS Settings and i got it to work, so i havent't tried anything else.
Just be assured to check /unckeck the right settings in the BIOS, and the GraphicsEnable=No in Multibeast.
Other than that you should be fine! you made the right choice, your money is well spent!