- Joined
- Jul 23, 2012
- Messages
- 14
- Motherboard
- Asus P8Z68 V Pro/Gen3
- CPU
- i7-2700K
- Graphics
- GT 640
- Mac
- Mobile Phone
Hardware
Motherboard: Gigabyte Z390 Gaming X, BIOS Version F7
CPU: Intel Core i5-9400 Coffee Lake CPU
Ram: Corsair Vengeance 32GB (2x16GB Sticks) DDR4-3000
Video: Radeon RX 570 4GB
SSD: Kingston 240GB
Power Supply: CoolerMaster 550W
Software
UniBeast 9.2.0, MultiBeast 11.3.0
Install macOS Mojave 10.14.6 (6.05GB)
Clover Configurator app version 5.6.2.0
A USB 3 drive was used for the installer drive and was connected to a USB 3 port
UniBeast: Install macOS Mojave on Any Supported Intel-based PC
BIOS Settings
MIT
Adv Frequency Setting > Extreme Memory Profile(XMP) > Profile 1 BIOS
Windows 8/10 Features > Other OS
Peripherals
Trusted Computing > Security Device Support > Disabled
Super IO Configuration > Serial Port > Disable
USB Configuration > XHCI Hand-off > Enabled
Network Stack > Disabled
Chipset
VT-d > Disabled
Internal Controller > Enabled
Power
ErP > Enabled
Boot from USB Installer in Verbose Mode (-V)
macOS Utilities display appeared > selected: Disk Utility > continue
On Disk Utility select target SSD, Name it as "Mojave"
For Format: it must be in APFS
Pressed erase > done > quit Disk Utility
6. A macOS Utilities display appeared > selecte install macOS > continue
after install it restart several times
then we get language selection then continue
Post Installation
Used Multibeast 11.3.0
select UEFI
Drivers>Audio>select AppleALC, 100/200/300 Series Audio support
USB>Select Remove XHCI USB port limit, USBInjectAll
Customize>System Definitions>iMac 18,2
Build
Restart
Fix Shutdown
enable the slide=0 field in Clover Configurator and install EmuVariableUEFI-64.efi to the EFI/EFI/CLOVER/drivers64UEFI folder
Thanks to this post by @kkho555
Motherboard: Gigabyte Z390 Gaming X, BIOS Version F7
CPU: Intel Core i5-9400 Coffee Lake CPU
Ram: Corsair Vengeance 32GB (2x16GB Sticks) DDR4-3000
Video: Radeon RX 570 4GB
SSD: Kingston 240GB
Power Supply: CoolerMaster 550W
Software
UniBeast 9.2.0, MultiBeast 11.3.0
Install macOS Mojave 10.14.6 (6.05GB)
Clover Configurator app version 5.6.2.0
A USB 3 drive was used for the installer drive and was connected to a USB 3 port
UniBeast: Install macOS Mojave on Any Supported Intel-based PC
BIOS Settings
MIT
Adv Frequency Setting > Extreme Memory Profile(XMP) > Profile 1 BIOS
Windows 8/10 Features > Other OS
Peripherals
Trusted Computing > Security Device Support > Disabled
Super IO Configuration > Serial Port > Disable
USB Configuration > XHCI Hand-off > Enabled
Network Stack > Disabled
Chipset
VT-d > Disabled
Internal Controller > Enabled
Power
ErP > Enabled
Boot from USB Installer in Verbose Mode (-V)
macOS Utilities display appeared > selected: Disk Utility > continue
On Disk Utility select target SSD, Name it as "Mojave"
For Format: it must be in APFS
Pressed erase > done > quit Disk Utility
6. A macOS Utilities display appeared > selecte install macOS > continue
after install it restart several times
then we get language selection then continue
Post Installation
Used Multibeast 11.3.0
select UEFI
Drivers>Audio>select AppleALC, 100/200/300 Series Audio support
USB>Select Remove XHCI USB port limit, USBInjectAll
Customize>System Definitions>iMac 18,2
Build
Restart
Fix Shutdown
enable the slide=0 field in Clover Configurator and install EmuVariableUEFI-64.efi to the EFI/EFI/CLOVER/drivers64UEFI folder
Thanks to this post by @kkho555
Attachments
Last edited: