[Success] GA Z370 Aorus Gaming 7 + i7-8700k + RX5700XT + OC

[Pavita]

If you're using a 4k monitor, then you need UIScale 02.
See if this runs better on your setup.
Attached is a large table edit of your vanilla DSDT.

Thank you plexi! This file load faster and smoother into login screen.

 

[trasm]

Awesome! I have finally booted my hackintosh thanks to your Open Core EFI!

Intel 9600K
Z390 Aorus Pro
Pulse RX 5600 XT

 

[plexi]

Thank you plexi! This file load faster and smoother into login screen.

That's cool.
Some people prefer a fully stripped down table.
Some people like all of the method left in.
Whatever works best for you.
The large table still loads the Mikey Driver SBUS.

 

[Pavita]

That's cool.
Some people prefer a fully stripped down table.
Some people like all of the method left in.
Whatever works best for you.
The large table still loads the Mikey Driver SBUS.

I figured it out why Temperature is not showing on iStat pro. kext files was order incorrectly on config.plist. I reordered Lilu on top then VirtualSMC and SMC plugins below ..now I'm getting all temp report showing.

 

[plexi]

I figured it out why Temperature is not showing on iStat pro. kext files was order incorrectly on config.plist. I reordered Lilu on top then VirtualSMC and SMC plugins below ..now I'm getting all temp report showing.

Yeah, the kext load order can be pretty vital in OpenCore.
I can see that you put the plugins above VirtualSMC.
I'm not using the SMC plugin kexts myself.
I like to keep things super stripped down and simple.

 

[Spartan711]

Hi @plexi, mind editing my DSDT?

if you guys want a DSDT for this board.
Gimmie a shout.
I've got the same board running an i9 9900k on F14 with everything working spot on in OpenCore.

Just upload a vanilla of whatever bios version you're on.

I'm running macOS Catalina (10.15.7 19H15), with SMBIOS 19,2.

My hardware is Gigabyte Aorus Gaming 7 + i7 8700k + Sapphire Pulse RX 580 + BCM94360CD PCI-E WiFi Adapter (native to macOS - gives me bluetooth, WiFi, handoff, etc).

I'm running F15a BIOS - with CFG disabled.

My current EFI uploaded, with config.plist edited to remove Serial Number (used GenSMBIOS from corpnewt).

Thank you!

(Edited to remove DSDT and EFI)

 

[plexi]

Hi @plexi, mind editing my DSDT?


I'm running macOS Catalina (10.15.7 19H15), with SMBIOS 19,2.

My hardware is Gigabyte Aorus Gaming 7 + i7 8700k + Sapphire Pulse RX 580 + BCM94360CD PCI-E WiFi Adapter (native to macOS - gives me bluetooth, WiFi, handoff, etc).

I'm running F15a BIOS - with CFG disabled.

My current EFI uploaded, with config.plist edited to remove Serial Number (used GenSMBIOS from corpnewt).

Thank you!

Regarding the attached EFI, I only changed the ACPI section (Including Patch). Put the RX580 in Device Properties, and added a couple of NVRAM boot args.
Audio is already set to 16 in the DSDT.
Should boot way quicker.
Lemmy know how that goes?
If it's all good, then upload your IOReg so and I can see where your Broadcom card is and add it into the DSDT.

 

[tikakan]

I am curious, would the Horus Ultra Gaming Mainboard boot with the config.plist from the Gaming 7 MB?

Best,

Tika

 

[plexi]

I am curious, would the Horus Ultra Gaming Mainboard boot with the config.plist from the Gaming 7 MB?

Best,

Tina

Upload your vanilla DSDT.
I'll edit it, then it will.

 

[tikakan]

Hi Plexi,

Thank you for the offer I will do that. Just need to fix my blotched transition from. Clover 5107 to opencore. I got a non boot system at the moment....

Best wishes Tikakan