Contribute
Register

[Success] Fresh install Catalina 10.15.4 - Gigabytes H67M-D2-B3 Rev 1.1 F4

Status
Not open for further replies.
Joined
Feb 25, 2011
Messages
2
Motherboard
Gigabyte h67m-d2-b3 Rev 1.1 F4
CPU
Intel Core i5 - 2400 - Sandy Bridge LGA1155
Graphics
RX580 Sapphire Nitro 8GB
Mac
  1. iMac
  2. MacBook Pro
Mobile Phone
  1. Android
  2. iOS
  3. Other
I am not expert here ; problem solved by looking on all these Hackintosh community - the intention is to share the config/configuration - so if someone out there having similar or slightly configuration can follow.


MOBO:[Success] Gigabytes H67M-D2-B3 Rev 1.1 F4
Socket: LGA1155
CPU: Intel Core i5 i5-2400 LGA1155 3.10GHz 6mb cache 95w
Intel HD2000 Graphic ( Not Using )
GPU: Sapphire Nitro RX580 8GB
RAM: 2x 8GB DDR3 ( Kingstons)
SSD : PNY 120GB
TPLINK AC1900ac
Bluetooth USB adapter ( iogear GB421)
Sound ( Using USB Sound Blaster SB1140 )
Ethernet card : not sure ( as i am using TP-LINK 1900AC PCI Express)
Monitor : Priism x315Max 4K (DP 1.2) 31. 1"
Single monitor setup at the moment

FILE ------ > in EFI.zip
{Patch}
/EFI/CLOVER/ACPI/patched/SSDT-SB-i5.aml

{Kext files in:} ------ > in EFI.zip
/EFI/CLOVER/CLOVER//Kexts/Other
AppleALC.kext
FakeSMC.kext --------- ( VirtualSMC.kext does not work)
Lilu.kext
RealtekRTL8111.kext
USBInjectAll.kext
WhateverGreen.kext
mXHCD.kext


NOTE: After Installed - not able boot straight from the SSD - solved by copied the EFI from us Install USB to the SSD EFI ( make sure mount them)
SYMBIOS iMacPro 1,1 - Working
HDMI - 4K not working - only 1080p working ( this was tested with SYMBIOS iMac 15,1)
DVI - Not working at all
DP - Working


STEPS:
1. Format minimum 8GB USB Thumb Drive as Mac OS Extended
2. Download Catalina Install on Apple Computer
3. sudo /Applications/Install\ macOS\ Catalina.app/Contents/Resources/createinstallmedia --volume /Volumes/MyVolume
4. Install Clover Clover_v2.5k_r5103.pkg to the USB Drive ( for this i used default selection )
- > Clover for UEFI booting only
- > Install Clover in the ESP
- > UEFI Drivers
5. Boot & Install
6. Post install - ( before reboot)
a. install Clover Configurator (cgc.zip)
b. Launch Clover Configurator
b. Mount EFI on USB Install - locate the EFI Folder
c. Mount EFI on local Hard disk EFI - on another Finder Windows
d. Copy the USB EFI Folder to the hard disk ( overwrite )
d. Reboot



EFI Folder zip as attached - as included these 2 files in the same zip
- > Clover Configurator 5.12.0.0 (cgc.zip)
- > Clover_v2.5k_r5103.pkg
 

Attachments

  • EFI.zip
    56.2 MB · Views: 291
Thanks. Your notes and files really helped me and gave me something to do during covid. This particular system was back on Yosemite. It wasn't an exact copy of your process as I started with UniBeast and then used the EFI folder you attached (I generated new serial numbers etc before connecting to the internet.. actually I haven't connected to the internet as of yet with this machine). I still have to do some more tests/benchmarks in the next few days as something feels laggy that I can't pinpoint. I'm using an Nvidia Quadro k600 for graphics which is natively supported. I also have the same processor. This won't be my main computer but probably a Plex server or something similar.

Do you know why iMac Pro was used for the SYMBIOS?
 
Status
Not open for further replies.
Back
Top