Contribute
Register

[Success]El Capitan - Asus B85M-G - i3 4170 - HIS 6670 2GB DDR3

Status
Not open for further replies.
Joined
Oct 2, 2016
Messages
1
Motherboard
Gigabyte B85M-DS3H-A
CPU
i3 4170
Graphics
GTX 660
Mac
  1. MacBook Air
Mobile Phone
  1. Android
Main Components :
1. Motherboard :
Asus B85M-G
2. Processor : Intel Core i3 4170
3. VGA Card : HIS 6670 2GB DDR3

Prerequisite Components :
4. Harddisk :
SSD Samsung EVO 840 120GB
5. Memory : Corsair Vengeance 8GB (2x4GB) DDR3 (CMZ8GX3M2A1600C9B)
6. Power supply : Corsair VS450
7. Bluetooth : Orico mini bluetooth receiver dongle BTA-408

Cosmetic Components :
8. Monitor :
My old Apple Cinema display 20inch
9. Case : Cooler Master Elite 110 (perfectly fit with my mainboard)
10. Mouse & Keyboard : Logitech bluetooth mouse M337, Logitech bluetooth keyboard K380

The magic begins...

Installation method :
1.
Create bootable disk using UniBeast.
2. Setup BIOS with optimal setup:
2.1 Turn off "Intel Virtualization Technology" on CPU setting.
2.2 Change "Other OS" on boot setting.
3. Detach Bluetooth & VGA, use internal DVI only. Use USB mouse and keyboard.
4.
Format your drive and start the installation, took me 10 minutes to finish the installation.

Your computer should start normally without any problems.. except your internal graphic little laggy. Intel 4400 doesn't work well with El Capitan. Ignore this because we need the bigger VGA graphic. Continue with these setups :

Important setting up MultiBeast, pick with my setup(I was tried a lot)
5. Quick Start : Select UEFI method
6.
Driver - Network : Realtek - RTL8111 v.2.0
7.
Customize - System Definitions : iMac 14,2

Restart once.. if there is any error message, just ignore..

8. Audio, use this kext : link
Download VoodooHDA887.kext.zip, and inject using Kext Wizard.

Restart once.. if there is any error message, just ignore.. Don't forget to setup your output at Preference.

9. Attach HIS 6670 2GB DDR3, if there is any error message.. same method.. ignore and keep restarting.. mine took 1-2 times to start the OS X normally.
10. Download Clover Configurator, save it into desktop.
11. Open Terminal, type : diskutil mount EFI
12.
Open file at EFI partition : EFI/CLOVER/config.plist with Clover Configurator
13. Choose Graphics : at FB name, fill with Pithecia and 3 at Video Ports
14. Save all, and go restart..
15. Attach ORICO Bluetooth
16.
Viola.. your hackintosh ready to use

The only 1 problem from this setup is : My hackintosh can not sleep and wake up.. if sleep just for 5-10seconds is OK.. but for a long time it wont wake. (After reading, googling and trying.. the big good reason is "change your VGA with nVidia that fully supported OOB)

For updating with 10.11.6, just download combo update or update via app store..
 

Attachments

  • Screen Shot 2016-10-07 at 4.02.01 AM.png
    Screen Shot 2016-10-07 at 4.02.01 AM.png
    79.3 KB · Views: 645
Last edited:
sorry to be a thread digger, can you please help me with BIOS with optimal setup?
Thanks.
 
Can you Upload your Efi folder please ?
 
Status
Not open for further replies.
Back
Top