[Success] Core i5 4690 - GA-Z97X-UD3H - 8GB RAM - HD 4600 & Geforce GT 610 - El Capitan - Windows 10

[poles]

poles"s Build: i5 4690 - GA-Z97X-UD3H - 8GB RAM - HD 4600 & Geforce GT 610 -
El Capitan - Windows 10 - Clover​

Components

Gigabyte Z97X-UD3H 9 series motherboard
http://www.amazon.com/Gigabyte-DDR3-1150-Motherboard-GA-Z97X-UD3H/dp/B00JKCHDC2/

Intel Core i5-4690 3.5 GHz Processor
http://www.amazon.com/dp/B00KPRWAX8/

Cooler Master Hyper 212 EVO - CPU Cooler
http://www.amazon.com/dp/B005O65JXI/

Cooler Master Elite Power SMPS 350W Power Supply
http://www.amazon.com/dp/B0034ADOB0

Kingston HyperX FURY 8GB 1600MHz DDR3 CL10 DIMM - Black (HX316C10FB/8)
http://www.amazon.com/dp/B00J8E9334/

Samsung 750 EVO 120GB SSD
http://www.amazon.com/dp/B0191K1E3G/

NZXT S340 Mid Tower Case CA-S340W-W1 (White)
http://www.amazon.com/dp/B00NGMIBXC/


Already Owned

Segate Barracuda 2TB Desktop SATA Internal Hard Drive (ST2000DM001)
http://www.amazon.com/dp/B005T3GRN2/


Comments

I am a iOS application developer. Though I already has a Mac-mini but it is very slow and the RAM cannot be upgradable. So I decided to buy a custom mac. And I found out that tonymacx86 has some helpful contents to build this type of mac. I followed their March's buyers guide and brought those components.

BIOS Set-up
I followed this tutorial to set the bios settings:

[video=youtube;E0qf9j68lVQ]https://www.youtube.com/watch?v=E0qf9j68lVQ[/video]​

Installation

The installation was very easy. I downloaded the OSX El Capitan 10.11.3 and made a bootable USB using UniBeast. After this, I followed the above mentioned YouTube tutorial to install it. After installation I used MultiBeast and Clover Configurator as post installation utility. Oh... I forgot to mention, I have to inject the Intel HD graphics and Nvidia driver as I'm am using older version (610 Series) graphics card.

​

I also needed to run Windows 10 on the same PC, so I made it dual boot using the following tutorial:

[video=youtube;dfg1wSGgNXk]https://www.youtube.com/watch?v=dfg1wSGgNXk[/video]​

What doesn't work that I've tested so far:
When I woke up from sleep the audio doesn't work.

I can't use Clover bootloader to boot Windows 10 also. I made 2 partitions in my 120GB SSD. One is for the OSX and another is for Windows 10. Another 3 partitions reside in my Seagate 2TB hard drive.

All 5 partitions are displaying in the clover bootloader. But only the HFS partition boots and the windows 10 partition is not. Here is a screenshot:

​

I tried every other partition but none of this is working unless I boot from boot menu using F12 during power on. If I select the top partition from the following boot menu (F12) then only the windows part boots.

Can anyone help me to fix these two things? Thanks in advance.

 

[poles]

After Installing VoodooHDA 2.8.6, it didn't work for me. Now in order to remove VoodooHDA, I ended up removing all audio devices. How to I reinstall audio ALC 1150 and the default AppleHDA?

 

[Shridhar]

u have installed osx via unibeast in uefi mode... so u have to install windows also in uefi mode..

so u should try creating windows 10 bootable with software known as RUFUS google it, and select option GPT for UEFI partition. and format as fat32 in rufus screen. and then install windows 10..

i recommend installing windows and mac osx on different drives.. do not install on same drive u may face issues in future

 

[poles]

u have installed osx via unibeast in uefi mode... so u have to install windows also in uefi mode..

so u should try creating windows 10 bootable with software known as RUFUS google it, and select option GPT for UEFI partition. and format as fat32 in rufus screen. and then install windows 10..

i recommend installing windows and mac osx on different drives.. do not install on same drive u may face issues in future

I used Rufus to create bootable USB of windows 10. Though I selected the UFEI option but formatted the USB drive as NTFS. So I think that is the main problem. Right?