[Success] - Catalina - TUF GAMING Z490-PLUS (WI-FI) i5-10400F + XFX 5500 XT 8GB + OpenCore

[j1m1l0k0h]

After suffering a little lol finally everything working.
I am attaching the EFI OpenCore I made

USB 3.x - Working
Video - Working
Ethernet - Working
Wifi Intel - It still doesn't work
BT Intel - It still doesn't work

Memory is 3200Mhz printed 3007Mhz
As soon as I get updated post.

Good fun

 

[Zottwalker]

After suffering a little lol finally everything working.
I am attaching the EFI OpenCore I made

Memory is 3200Mhz printed 3007Mhz
As soon as I get updated post.

Thanks! Tried your refi version on my Asus org Z490 maximus XII hero + i710700k and radeon 5700 xt but outstrip stop at "61" alias nvram initialisation step of my MB boot

 

[lestatmail]

Good,
I had thought about buying this board, since I want to upgrade my pc with a 10 generation board and processor.

Do you recommend it? Is everything working well at this point?

I ask because I am not as expert as you. Right now I have big sur on an old computer (haswell).

I hope your answer and thank you very much.

 

[j1m1l0k0h]

Thankyou It worked for me, but the Ethernet not working, have to do some research on fixing it.
the system is ASUS TUF Z490-plus (wifi) I7 10700 Tenth Gen, MSI Radeon RX 580, 8gb, Crucial Ballistix sport 3200 MHZ 16gb, WD NvMe SSD 500gb. My third Hackintosh build, first time with Open core.

try using this updated driver.
probably your ethernet chipset is intel by the model of your motherboard. this driver should resolve.

Copy Kext to the Others directory of OpenCore

Release 1.0.4 · acidanthera/IntelMausi

v1.0.4 Added MacKernelSDK with Xcode 12 compatibility Added IntelSnowMausi variant for 10.6-10.8

github.com

Good luck

 

[j1m1l0k0h]

Good,
I had thought about buying this board, since I want to upgrade my pc with a 10 generation board and processor.

Do you recommend it? Is everything working well at this point?

I ask because I am not as expert as you. Right now I have big sur on an old computer (haswell).

I hope your answer and thank you very much.

Hello Friend, how are you ?

Everything works perfectly.

 

[fano_linux]

Thank you very much! It worked like a charm for me:
i9 10850k
TUF GAMING Z490-PLUS (not the wifi one)

 

[sunilkumarpt]

After suffering a little lol finally everything working.
I am attaching the EFI OpenCore I made

USB 3.x - Working
Video - Working
Ethernet - Working
Wifi Intel - It still doesn't work
BT Intel - It still doesn't work

Memory is 3200Mhz printed 3007Mhz
As soon as I get updated post.

Good fun

After suffering a little lol finally everything working.
I am attaching the EFI OpenCore I made

USB 3.x - Working
Video - Working
Ethernet - Working
Wifi Intel - It still doesn't work
BT Intel - It still doesn't work

Memory is 3200Mhz printed 3007Mhz
As soon as I get updated post.

Good fun

thanks

 

[iMacVador]

Hi everyone,

I started my nw Hackintosh with an Asus Tuf Z490-plus with a i5 and the graphic card I was using on my old config Asus Arez-RX560-2G-EVO (which was working great).

Since I changed my Mobo and made a OpenCore clean install following your post, I have 2 little problems

1st/1 :
With the onboard I can only use DP the HDMI is not working et all (can't use 2 screen)

1st/2 :
I can't use my RX560 but (black screen)

2nd :
no audio from the mainboard... I'm using an apple Cinema Display 27" so have sound over USB on the screen

make Hackintosh from years but since open core I'm somewhat lost , if I could get some help that would be welcome.

 

[iMacVador]

I found the solution... in the config.plist file under NVRAM -> Add -> 7c436110...... -> boot-args

replaced : agdpmod=ignore with alcid=1

rebooted and there was the surprise...

I could boot on my RX560 with 1, 2 and 3 screens, got sound from my apple screen (from DP) and on my other screen connected in HDMI