[Success] Catalina on H370M DS3H i5-9600K on UHD630

[andr3ytp]

Motherboard: Gigabyte H370M DS3H
CPU: i5-9600K
RAM: 2x8GB Cosair Vengeance DDR4 2400Mhz
SSD: Plextor M8V 256GB

ktexts:
AtherosE2200Ethernet.kext
FakeSMC.kext
IntelMausiEthernet.kext
Lilu.kext
RealtekRTL8111.kext
USBInjectAll.kext
WhateverGreen.kext

Used: Clover UEFI Boot Mode with Emulated NVRAM v2.4k r4961

Used this guide for installing: https://www.tonymacx86.com/threads/...catalina-public-beta-installation-usb.278188/
I had 2x8GB ram and to finish the install I had to remove 1, after install I put it back.

Spend a bit of time figuring out why UHD630 wasn't working properly.
Had to add ig-platform-id : 0x3E9B0007 to Graphics using Clover Configurator and removed Inject Intel.


Geekbench 5.1.0 for macOS x86 (64-bit)
Single-Core Score: 1104
Multi-Core Score: 5313


Integrated graphics work.
Audio doesn't work yet.
Ethernet works.
USB no problems.

 

[brookheather]

Hi - I have a similar setup with a Gigabyte B360M DH3 motherboard and Intel Core i3-8100 processor with UHD 630 graphics and a QHD monitor connected via DisplayPort. Does sleep/wake work on your machine as on mine it crashes a few seconds after the screen goes dark and reboots. I am using the iMac19,2 definition as that seems to match the i3-8100 processor. I was wondering if I will need to install a discrete AMD GPU to fix this?

 

[most55]

Hi, I have the same motherboard but different CPU and RAM.
Can I use your EFI and config?

Thank you

 

[somanyraces]

Hi man, are you using the Displayport connector? How many monitors and what is the resolution? I am spending the days to make the graphics working properly without results. But I am using hdmi/dvi-d monitors, will check with the Displayport tomorrow.

 

[brookheather]

Only the DisplayPort output worked for me on my B360M DH3 motherboard.

 

[somanyraces]

Looks like this should be specified in the installation guide, I found the info about the inability to patch the framebuffer without the DP monitor or the external GPU in the framebuffer patching guide))

 

[themageman]

FYI H370M DS3H | i5 8400 | HD 630 Clover not supported when used with HDMI port, unfortunate the mother board does not have display port adapter. You need to install clover using a GPU, once installed then the HDMI will work without the GPU.