- Joined
- Jul 1, 2018
- Messages
- 388
- Motherboard
- GIGABYTE Z370N
- CPU
- i7-8700
- Graphics
- RX 560
- Mac
- Mobile Phone
You don't need kexts for iGPU, only some clover settings.Thanks for your guide!
I got same system config.
I tried to use iGPU as described here:
https://www.tonymacx86.com/threads/guide-intel-framebuffer-patching-using-whatevergreen.256490/
Looks like it's work.
Do you know to check which kext actually use iGPU?
You did not understand me.
I mean which kext in use:
AppleIntelKBLGraphicsFramebuffer.kext or AppleIntelCFLGraphicsFramebuffer.kext
Can you confirm if you are able to hear audio from movie clips you are about to import into fcpx?
Ok then...guess I’m back to the drawing board with troubleshooting.Yep, I have sound during Import, in Project section and in Timeline.
Ok then...guess I’m back to the drawing board with troubleshooting.
You mentioned in a previous post to use the intel power tool to verify if the igpu is being used. I did this but honestly, I could not totally understand what I was seeing. In the first box, the core was being hit while the dram was next to nothing. The second box showed core being used while the gpu was little to none. Is that the expected output if I have dgpu and igpu setup correctly?