- Joined
- Oct 12, 2012
- Messages
- 173
- Motherboard
- ASUS X299 Prime Deluxe
- CPU
- i7-7820X
- Graphics
- GTX 1080 Ti
- Mac
- Mobile Phone
Status: WORKING 10.9.1 with XEON E5-2680v2 - Nvidia GTX770 4GB - 32 GB Ram - Asus Z9PE-W8
the following components are perfect to assemble an OSX hackintosh, similar or more powerful as the new Macpro. Playing 5K full-res R3D clips in Redcine-X Pro!
Working:
• CPU v2 Xeon
• Audio (Multibeast ALC 898)
• Ethernet (working directly)
• USB3 (working directly)
• GTX 770 4GB @ 2x 2560x1440px Shiman (working after changing 2 kext)
• Sleepmode
• Timemachine Backup via USB3 -> Seagate 3TB HDD
• NEW: Apogee DUET via Firewire -> drivers from Apogee website
Not working:
• Speedstep
• CPU turbo Boost
• Eject on Apple keyboard
• Idle mode of Nvidia card - clock speed is not getting back to idle mode!
This is a problem of 10.9.1 - maybe it' s fixed in 10.9.2
Components:
CPU: 1x E5-2680v2 10x2,8 Ghz -> BIOS 5304 (newest January 2014)
Mainboard: Asus Z9PE-D8 WS dual Socket 2011
Grafics: GTX 770 4GB from Gigabyte -> SLOT 3
RAM: 32GB DDR3 Kingston ECC
Harddrive OSX: 256 GB SSD Samsung Evo
Harddrive Work: 512 GB SSD Samsung Evo
Harddrive Raid: 3x 2TB WD HDD for Raid-0
Power Supply: Seasonic 750W semi passive
Timemachine Backup: 3TB USB 3 HDD Seagate
Bluray burner: LG
BIOS Settings:
• Load defaults
• Disable VT-D
• Disable Speedstep
• Set RAM to Forced 1600 MHZ!
Install 10.9.1:
Buy Mavericks from the appstore. Do a simple install of 10.9.1 and follow these instructions:
Unibeast on a normal MAC / Macbook.
You got a V2 XEON? Change the mach_kernel of the USB stick and after the installation also on the HDD you installed OSX -> http://www.osx86.net/files/file/3563-109-gm-ivy-bridge-e-kernel/
First to see hidden files (otherwise you don't see the mach_kernel):
To change the mach_kernel do the following:
Open the terminal -> type "cp directory/new/mach_kernel directory/old/mach_kernel" -> drag & drop the file from the finder into the terminal! It's quiet simple. If the mach_kernel is greyed out, change the attributes and make it read/write for all users. -> write "cp / space / drag&drop new mach_kernel / space / drag&drop old mach_kernel / Enter". Now you changed the kernel and you wont get a blackscreen anymore.
Installation from USB:
Now you put your stick into your Asus Z9PE and use onboard VGA (dont install a Nvidia card). With -v -x the install should start. Install 10.9.1 on your chosen HDD/SSD. If the install is ready, unplug this drive, plug it as a usb drive (or else) into your mac and change the mach_kernel again! Plug the drive into your new hackintosh. Network should work from the beginning, download Multibeast or Chameleon and install a Bootloader and the kext you need.
For the SMbios better use Chameleon wizard and choose: MacPro 5.1
To use a Gigabyte GTX770 4GB i installed the following kext -> AppleAHCIPort and IOPCIFamily kext. Download: http://www.file-upload.net/download-8548608/GTX-770-KEXT.zip.html
Then boot with "-v npci=0x2000 dart=0" and if this works for you, enter the flags into the "...boot.plist"
Davinci Resolve_
Should work!
Cheers!
the following components are perfect to assemble an OSX hackintosh, similar or more powerful as the new Macpro. Playing 5K full-res R3D clips in Redcine-X Pro!
Working:
• CPU v2 Xeon
• Audio (Multibeast ALC 898)
• Ethernet (working directly)
• USB3 (working directly)
• GTX 770 4GB @ 2x 2560x1440px Shiman (working after changing 2 kext)
• Sleepmode
• Timemachine Backup via USB3 -> Seagate 3TB HDD
• NEW: Apogee DUET via Firewire -> drivers from Apogee website
Not working:
• Speedstep
• CPU turbo Boost
• Eject on Apple keyboard
• Idle mode of Nvidia card - clock speed is not getting back to idle mode!
This is a problem of 10.9.1 - maybe it' s fixed in 10.9.2
Components:
CPU: 1x E5-2680v2 10x2,8 Ghz -> BIOS 5304 (newest January 2014)
Mainboard: Asus Z9PE-D8 WS dual Socket 2011
Grafics: GTX 770 4GB from Gigabyte -> SLOT 3
RAM: 32GB DDR3 Kingston ECC
Harddrive OSX: 256 GB SSD Samsung Evo
Harddrive Work: 512 GB SSD Samsung Evo
Harddrive Raid: 3x 2TB WD HDD for Raid-0
Power Supply: Seasonic 750W semi passive
Timemachine Backup: 3TB USB 3 HDD Seagate
Bluray burner: LG
BIOS Settings:
• Load defaults
• Disable VT-D
• Disable Speedstep
• Set RAM to Forced 1600 MHZ!
Install 10.9.1:
Buy Mavericks from the appstore. Do a simple install of 10.9.1 and follow these instructions:
Unibeast on a normal MAC / Macbook.
You got a V2 XEON? Change the mach_kernel of the USB stick and after the installation also on the HDD you installed OSX -> http://www.osx86.net/files/file/3563-109-gm-ivy-bridge-e-kernel/
First to see hidden files (otherwise you don't see the mach_kernel):
- Open Finder
- Open the Utilities folder
- Open a terminal window
- Copy and paste the following line in:
defaults write com.apple.Finder AppleShowAllFiles YES - Press return
- Now hold ‘alt’ on the keyboard and right click on the Finder icon
- Click on Relaunch
To change the mach_kernel do the following:
Open the terminal -> type "cp directory/new/mach_kernel directory/old/mach_kernel" -> drag & drop the file from the finder into the terminal! It's quiet simple. If the mach_kernel is greyed out, change the attributes and make it read/write for all users. -> write "cp / space / drag&drop new mach_kernel / space / drag&drop old mach_kernel / Enter". Now you changed the kernel and you wont get a blackscreen anymore.
Installation from USB:
Now you put your stick into your Asus Z9PE and use onboard VGA (dont install a Nvidia card). With -v -x the install should start. Install 10.9.1 on your chosen HDD/SSD. If the install is ready, unplug this drive, plug it as a usb drive (or else) into your mac and change the mach_kernel again! Plug the drive into your new hackintosh. Network should work from the beginning, download Multibeast or Chameleon and install a Bootloader and the kext you need.
For the SMbios better use Chameleon wizard and choose: MacPro 5.1
To use a Gigabyte GTX770 4GB i installed the following kext -> AppleAHCIPort and IOPCIFamily kext. Download: http://www.file-upload.net/download-8548608/GTX-770-KEXT.zip.html
Then boot with "-v npci=0x2000 dart=0" and if this works for you, enter the flags into the "...boot.plist"
Davinci Resolve_
Should work!
Cheers!