Contribute
Register

[Success] Asus Z10PA-D8 2683v4 2x64 with Vega FE (no iGPU)

Status
Not open for further replies.
Where you have looking..???
Any other info about??
Still not understanding..???
Test on cinebenchr23
multi 23534
Single 783
Ghz on istat delta 2.87 to 3.27

10 minutes test
So its the turbo unlocked or not??
 

Attachments

  • 295A083B-9182-459B-B391-ACB48AF58B67.jpeg
    295A083B-9182-459B-B391-ACB48AF58B67.jpeg
    103.9 KB · Views: 65
  • 9D85AB21-7992-4C6C-A64D-22C10B54F373.jpeg
    9D85AB21-7992-4C6C-A64D-22C10B54F373.jpeg
    121.2 KB · Views: 67
  • A3ACDAD5-6E47-4F79-96AF-F997D366C9D6.jpeg
    A3ACDAD5-6E47-4F79-96AF-F997D366C9D6.jpeg
    103.4 KB · Views: 60
  • 9703BC26-DDAB-4F36-BB57-E00EB5A4CDB8.jpeg
    9703BC26-DDAB-4F36-BB57-E00EB5A4CDB8.jpeg
    101.3 KB · Views: 85
Problably with the 3801 bios is already unlocked...
I’ve updated today
Istat show the ghz...
I think my problem is around power management...
hi

there is no unlocked bios, 3801 is locked to

just check on google "How to unlock xeon broadwell V4" and you will find that is not possible to unlock

yes, maybe power managment is the problem, you must change the config.plist from corvinon to match your cpu

regards
 
Still not understanding..???
Test on cinebenchr23
multi 23534
Single 783
Ghz on istat delta 2.87 to 3.27

10 minutes test
So its the turbo unlocked or not?

xeon 2680 v4 shoould run at 3,3 ghz unlocked, all cores i suppose, and get a geekbench score more than 15000
 
i

i know on geekbench some people run your cpu unlocked, i really do not know how
Hello...
Checked my microcode
And its already uodated..in the bios.. check the photo..
As i’ve also tried to update it.
But the firmware flashed for bios with ubu metod. But is not working for me on ezflash not passing the image check...
Anyway on cpz and on hwmonitor in windows its cleared for me its unlocked becouse is not stuck on base freq 2,4 but is all on 2893 ghz...but not full turbo 3,3...
I suspect my problem is around the multiplier ...check the image
Stuck at 29x but will probably arrive to the 33x!!
 

Attachments

  • D70EF950-BFB9-4ED5-A13C-F4B316CA84E6.jpeg
    D70EF950-BFB9-4ED5-A13C-F4B316CA84E6.jpeg
    114.5 KB · Views: 69
  • 88A004F8-B9D2-4AD7-9534-3221C9AF539E.jpeg
    88A004F8-B9D2-4AD7-9534-3221C9AF539E.jpeg
    109.7 KB · Views: 73
  • FB43451B-2E88-4ACF-B0C5-88CF3C94EF45.jpeg
    FB43451B-2E88-4ACF-B0C5-88CF3C94EF45.jpeg
    94.5 KB · Views: 65
  • 803408E4-5D4D-47B3-B209-0C0A38FF1618.jpeg
    803408E4-5D4D-47B3-B209-0C0A38FF1618.jpeg
    111.4 KB · Views: 63
  • 2B2AB77D-50F5-4C31-899D-229D3B11AAF8.jpeg
    2B2AB77D-50F5-4C31-899D-229D3B11AAF8.jpeg
    113.6 KB · Views: 74
Hello...
Checked my microcode
And its already uodated..in the bios.. check the photo..
As i’ve also tried to update it.
But the firmware flashed for bios with ubu metod. But is not working for me on ezflash not passing the image check...
Anyway on cpz and on hwmonitor in windows its cleared for me its unlocked becouse is not stuck on base freq 2,4 but is all on 2893 ghz...but not full turbo 3,3...
I suspect my problem is around the multiplier ...check the image
Stuck at 29x but will probably arrive to the 33x!!
Hello

sorry, i dont know how to help you

Lets image that your cpu are (i do not know how) unlocked and running at 2,83Ghz, your score between 7500 e 9000 is not a good score,

at geekbench a dual E5-2680 v4 cpu running at 2,4Ghz and 32Gb ram, scores around 9500 with no turbo,

so your unlocked turbo!!!! should score higher than that, maybe around 12000

regards
 
Hello...
Checked my microcode
And its already uodated..in the bios.. check the photo..
As i’ve also tried to update it.
But the firmware flashed for bios with ubu metod. But is not working for me on ezflash not passing the image check...
Anyway on cpz and on hwmonitor in windows its cleared for me its unlocked becouse is not stuck on base freq 2,4 but is all on 2893 ghz...but not full turbo 3,3...
I suspect my problem is around the multiplier ...check the image
Stuck at 29x but will probably arrive to the 33x!!
one more thing

i suppose is not possible to change the multiplier on z10pa-d8 bios
 
one more thing

i suppose is not possible to change the multiplier on z10pa-d8 bios
Thinking to do a test,
This 2 cpu i’ve buyed used and with in different time like /2 3 months one in November one in January..from 2 different seller in ebay..if only one is working with unlocked torbo...
On all apps for see the stat or the ghz show me only for 1 processors..
Will try to remove one and test by 1/1 too see what happens..
So the question is will the mobo work with one cpu only???
 
Thinking to do a test,
This 2 cpu i’ve buyed used and with in different time like /2 3 months one in November one in January..from 2 different seller in ebay..if only one is working with unlocked torbo...
On all apps for see the stat or the ghz show me only for 1 processors..
Will try to remove one and test by 1/1 too see what happens..
So the question is will the mobo work with one cpu only???
Somethings strange...checked on windows with cpz or geekbenck working only one cpu.
So remuved one and test working at x29 as usual 2893 mhz, test the second working as asual.
Put back the second cpu retest and still get only one..????wtf...open the hack on osx i see 2 cpu working ..any idea what happens??

****Edit win10home not support dual cpu,change to enterprise and will see my 2 cpu.
both running at x29 multiplier at 2893 mhz all core.

bench not change under 10000 multicore

so try to update che Corvinon efi.
managed to run catalina and bigsur
re try on geek bench.
nothing change.always under 10000multiscore.


some search found this score amazing..
but not for me at moment. ehehe

probably is somethings in my bios..3801.
will try some older to see what change...
 

Attachments

  • Schermata 2021-02-21 alle 09.59.13.png
    Schermata 2021-02-21 alle 09.59.13.png
    132 KB · Views: 62
Last edited:
Status
Not open for further replies.
Back
Top