[Success] Asus Z10PA-D8 2683v4 2x64 with Vega FE (no iGPU)

[jchandsome]

hello

my best score was 12940, no turbo.

no sleep mode, it's not possible to get it work because is a sever board and is not supposed to get in sleep mode .

did you manage to get audio working? the board has no audio chip, so no audio, did you bought any external audio card?

I have another problem. Big Sur did not mount the Samsung HHDs, I can see the drives on diskutility, but no volume mounted, and it's not even possible to erase the HDDs. Big Sur mounts with no problem an old 4200rpm Maxtor. it's crazy.


When I connect the Samsung HDDs from an external USB enclosure, the drives are mounted and it's possible to erase, with no problem.

Any suggestion?

Regards

 

[jchandsome]

hey J any chance to get your efi..

thanks

my config has no power management at all, and I suppose no NVRAM working

 

[sleepnomore22]

hello

my best score was 12940, no turbo.

no sleep mode, it's not possible to get it work because is a sever board and is not supposed to get in sleep mode .

did you manage to get audio working? the board has no audio chip, so no audio, did you bought any external audio card?

I have another problem. Big Sur did not mount the Samsung HHDs, I can see the drives on diskutility, but no volume mounted, and it's not even possible to erase the HDDs. Big Sur mounts with no problem an old 4200rpm Maxtor. it's crazy.


When I connect the Samsung HDDs from an external USB enclosure, the drives are mounted and it's possible to erase, with no problem.

Any suggestion?

Regards

Thanks for the efi man...
About audio:
I’ve 2 external audio interface
Both from RME for audio professional..
1 with original pcie card.
1 is fireface400 which need firewire to power up and i’ve buyed an pcie adapter to firiewire!!!
Working good to me...

i’ve too my hdd is not working if is pluged in any of sata or ssata...

after many attemps ,
In bios you nees to set up
One of alp disable...
Not remember now when i’m at home will send you my screen...
after that i now see all my hdds
Will back to later today..

 

[jchandsome]

Thanks for the efi man...
About audio:
I’ve 2 external audio interface
Both from RME for audio professional..
1 with original pcie card.
1 is fireface400 which need firewire to power up and i’ve buyed an pcie adapter to firiewire!!!
Working good to me...

i’ve too my hdd is not working if is pluged in any of sata or ssata...

after many attemps ,
In bios you nees to set up
One of alp disable...
Not remember now when i’m at home will send you my screen...
after that i now see all my hdds
Will back to later today..

many thanks

it´s nice to share our experiences


edit the config.plist with your device properties, i removed my devices from the file because they are not the same and mounted on a different pci-e slot

i suppose the hybernation kext is not needed, as well the ssdt usb-reset.aml

 

[jchandsome]

Thanks for the efi man...
About audio:
I’ve 2 external audio interface
Both from RME for audio professional..
1 with original pcie card.
1 is fireface400 which need firewire to power up and i’ve buyed an pcie adapter to firiewire!!!
Working good to me...

i’ve too my hdd is not working if is pluged in any of sata or ssata...

after many attemps ,
In bios you nees to set up
One of alp disable...
Not remember now when i’m at home will send you my screen...
after that i now see all my hdds
Will back to later today..

hi

about audio....

so, when you edit your music you use the RME.... ok, i understand

when you want to listening some youtube music or watch Netflix, the audio from the web will run over the RME as well? or over the graphics card audio drive? which alcid= number are you using?

regards

 

[jchandsome]

Thanks for the efi man...
About audio:
I’ve 2 external audio interface
Both from RME for audio professional..
1 with original pcie card.
1 is fireface400 which need firewire to power up and i’ve buyed an pcie adapter to firiewire!!!
Working good to me...

i’ve too my hdd is not working if is pluged in any of sata or ssata...

after many attemps ,
In bios you nees to set up
One of alp disable...
Not remember now when i’m at home will send you my screen...
after that i now see all my hdds
Will back to later today..

about sleep/hibernation mode

does your system sleep or not?

thanks

 

[sleepnomore22]

about sleep/hibernation mode

does your system sleep or not?

thanks

Hey man
So to make working the hhd on sata port i’ve set disable this one on the image...

about the sleep and hibernate i never get working too...

for audio i always use my rme audio interfaces becouse this machine is only working to make music..so yep everything pass on rme working good...never tried from rx560 hdmi...becouse i havent any hdmi monitor...so just never tried


about your efi tried to use it..
But all my image drive seems not working...
I got gray screen with os prohibition logo

 

[vnxbug]

hello

my best score was 12940, no turbo.

no sleep mode, it's not possible to get it work because is a sever board and is not supposed to get in sleep mode .

did you manage to get audio working? the board has no audio chip, so no audio, did you bought any external audio card?

I have another problem. Big Sur did not mount the Samsung HHDs, I can see the drives on diskutility, but no volume mounted, and it's not even possible to erase the HDDs. Big Sur mounts with no problem an old 4200rpm Maxtor. it's crazy.


When I connect the Samsung HDDs from an external USB enclosure, the drives are mounted and it's possible to erase, with no problem.

Any suggestion?

Regards

I tried your EFI but no look, score around 8k5 - 9k1 and cannot be higher.
I think the problem is with the turbo unlock mainboard feature but I can't unlock the MSR yet

 

[vnxbug]

Hi all
Here is my score, not bad for e5 2630v3 x2.
In Catalina 11,712
A greeting.View attachment 508697

Can you help me share your turbo unlocked bios version 3801 firmware (.cap ext) ?
I follow UBU guide to unlock and get the new firmware but i can't flash, i got an error when flash "Image integrity check failed"
Thank for your help !

 

[corvinon]

Hello
This message is addressed to both you and Jchandsome.
I do not take care of the damages that you do to your motherboard.
I downloaded 3801 bios.
Converted from .cap to .rom
Delete the microcodes with mmtool.
And update with the resulting bios.
Read next link IMPORTANT.

[Guide] How to flash a modded AMI UEFI BIOS

Since SoniX has presented his wonderful UBU tool (look >here< ) it has become very easy to modify any UEFI mode mainboard BIOS regarding their included

www.win-raid.com

Before doing all this, I covered my back, buying a bios module on ebay, in case something went wrong, but it was not the case.
You already tell me.