Contribute
Register

[Success] - Asus ROG Strix Z490-E Gaming + i9 10900K + OpenCore

Hello Guys, Hello Scope,

I've used last Scope EFI for miroring my EFI that I've modified SSDTS, USB ports map, PCI root and I've now the fastest hackintosh I never seen!:thumbup: I've build others but none like this one. Everything runs like a real Mac but faster.

Only problem(Big problem) ; It's a dual boot MacOS/Windows. I've installed first MacOS on Nvme, put it down, put another Nvme in, installed Windows, drivers, updates, stres tests, etc, put it out, put MacOS Nvme again, verifi that runs like a charm, put Windows Nvme again. Restart PC, OC screen with the 2 disk apper for choice to boot; MacOS boot always like a charm but Windows now take BLUE SCREEN!

Disappointed...

Suggestions?
 
macmaxxx said:
Hello Guys, Hello Scope,

I've used last Scope EFI for miroring my EFI that I've modified SSDTS, USB ports map, PCI root and I've now the fastest hackintosh I never seen!:thumbup: I've build others but none like this one. Everything runs like a real Mac but faster.

Only problem(Big problem) ; It's a dual boot MacOS/Windows. I've installed first MacOS on Nvme, put it down, put another Nvme in, installed Windows, drivers, updates, stres tests, etc, put it out, put MacOS Nvme again, verifi that runs like a charm, put Windows Nvme again. Restart PC, OC screen with the 2 disk apper for choice to boot; MacOS boot always like a charm but Windows now take BLUE SCREEN!

Disappointed...

Suggestions?
Click to expand...

From my experience, I don't like to let Opencore boot Windows, because it messes with the ACPI stuff too much. The way I do it is I have Opencore and Big Sur on a seperate drive, and I press F8 at the boot screen to pick this alternate disk. If I don't hit F8, it goes to a different disk that has the Windows stock EFI and Windows itself. In this way Opencore is never called / run when I boot into Windows.
 
Thank You for answer, I'll try that. Yes, in fact on Blue Screen appear code: "ACPI bios error"
 
YES! I'ts RUN! Thank You very much Scope!
 
dahansome said:
Thank you for using your EFI to solve some of the problems with M12h
Click to expand...

I normally ALWAYS buy the Hero version, but for whatever reason this year they took the DisplayPort off, but kept it on the Strix, that's why I have this board instead.

h732
 
scope666 said:
I normally ALWAYS buy the Hero version, but for whatever reason this year they took the DisplayPort off, but kept it on the Strix, that's why I have this board instead.

h732
Click to expand...
Your EFI is installed with bigsur, so there are still other problems that have not been solved. Now I am troubleshooting these problems. For example, your network card is 225, M12H is 219, 225 does not require a separate driver, but 219 is needed.
 
dahansome said:
Your EFI is installed with bigsur, so there are still other problems that have not been solved. Now I am troubleshooting these problems. For example, your network card is 225, M12H is 219, 225 does not require a separate driver, but 219 is needed.
Click to expand...

This is a great place to find fixes for the little things, like the 219 Ethernet you mentioned:

OpenCore Post-Install | OpenCore Post-Install

dortania.github.io
 
Someone tried to install macOS Monterey?
 
Nevermind: I made a clean install and it works. I just receive a panic error and it freezes or reset:

panic(cpu 8 caller 0xffffff8012fe5b53): Kernel trap at 0xffffff8012fdd1cd, type 14=page fault, registers:
CR0: 0x0000000080010033, CR2: 0xffffff8016e015d8, CR3: 0x0000000854641068, CR4: 0x00000000003626e0
RAX: 0x0000000000840000, RBX: 0xffffff8016e015d0, RCX: 0x0000000000840000, RDX: 0x0000000003840000
RSP: 0xffffffd0437fbc58, RBP: 0xffffffd0437fbc70, RSI: 0xffffff8016e015d0, RDI: 0xffffff8016e015d0
R8: 0x0000000000000016, R9: 0x0000000000000002, R10: 0xffffff92cfe45fd0, R11: 0xffffff80137e3edb
R12: 0xffffff8013e866e8, R13: 0x00000000e00002bd, R14: 0xffffff855c543160, R15: 0xffffff92d0d9697c
RFL: 0x0000000000010202, RIP: 0xffffff8012fdd1cd, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff8016e015d8, Error code: 0x0000000000000003, Fault CPU: 0x8, PL: 1, VF: 5

Panicked task 0xffffff8558fed7c0: 3 threads: pid 82: systemstats
Backtrace (CPU 8), panicked thread: 0xffffff855c543160, Frame : Return Address
0xffffffd0437fb680 : 0xffffff8012e9c00d
0xffffffd0437fb6d0 : 0xffffff8012ff5d85
0xffffffd0437fb710 : 0xffffff8012fe5763
0xffffffd0437fb760 : 0xffffff8012e3ba60
0xffffffd0437fb780 : 0xffffff8012e9c3dd
0xffffffd0437fb8a0 : 0xffffff8012e9bb96
0xffffffd0437fb900 : 0xffffff8013718649
0xffffffd0437fb970 : 0xffffff8012fe5b53
0xffffffd0437fbaf0 : 0xffffff8012fe5838
0xffffffd0437fbb40 : 0xffffff8012e3ba60
0xffffffd0437fbb60 : 0xffffff8012fdd1cd
0xffffffd0437fbc70 : 0xffffff80159fbe46
0xffffffd0437fbcb0 : 0xffffff8013621054
0xffffffd0437fbcd0 : 0xffffff801362156f
0xffffffd0437fbd00 : 0xffffff8013695c08
0xffffffd0437fbd70 : 0xffffff8012fa1b26
0xffffffd0437fbdc0 : 0xffffff8012e76cf9
0xffffffd0437fbe50 : 0xffffff8012e8dd89
0xffffffd0437fbee0 : 0xffffff8012fcaaf2
0xffffffd0437fbfa0 : 0xffffff8012e3c246
Kernel Extensions in backtrace:
com.apple.iokit.IOPCIFamily(2.9)[5E1B0BE0-4B73-35F5-9126-EB05FBB8BAF5]@0xffffff80159ee000->0xffffff8015a18fff

Process name corresponding to current thread (0xffffff855c543160): systemstats
Boot args: dk.e1000=0 -wegnoegpu

Mac OS version:
21A559

Kernel version:
Darwin Kernel Version 21.1.0: Wed Oct 13 17:33:23 PDT 2021; root:xnu-8019.41.5~1/RELEASE_X86_64
Kernel UUID: 19BD4E1B-0268-3EE0-BC66-91F035BC9429
KernelCache slide: 0x0000000012c00000
KernelCache base: 0xffffff8012e00000
Kernel slide: 0x0000000012c10000
Kernel text base: 0xffffff8012e10000
__HIB text base: 0xffffff8012d00000
System model name: iMac20,2 (Mac-AF89B6D9451A490B)
System shutdown begun: NO
Panic diags file available: YES (0x0)
Hibernation exit count: 0

System uptime in nanoseconds: 606564799486
Last Sleep: absolute base_tsc base_nano
Uptime : 0x0000008d3a14565d
Sleep : 0x0000000000000000 0x0000000000000000 0x0000000000000000
Wake : 0x0000000000000000 0x0000000c9bd71142 0x0000000000000000
Zone info:
Foreign : 0xffffff801866c000 - 0xffffff8018679000
Native : 0xffffff8049db4000 - 0xffffffa049db4000
Readonly : 0 - 0
Metadata : 0xffffffe03a059000 - 0xffffffe05a371000
Bitmaps : 0xffffffe05a371000 - 0xffffffe066371000

Suggestions?
 
You must log in or register to reply here.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top