[Success] - Asus ROG Strix Z490-E Gaming + i9 10900K + OpenCore

[Vhdin2]

Anyways feel free to ask about stuff in my EFI. I'm more than excited to help people

Hi Dreamwhite, do you use front usb c on your pc case, if so, could you send me the usb map kext that you use as I use that port a lot. Also can you send me your BIOS settings. I will really appreciate your help.

 

[Vhdin2]

If you look at the comments field of the image, it says what ports are what:

[Success] - Asus ROG Strix Z490-E Gaming + i9 10900K + OpenCore

I wanted to post my config if it helps anyone else. (full EFI folder attached) Motherboard: Asus ROG Strix Z490-E Gaming CPU: Intel 10900K RAM: CORSAIR Vengeance RGB Pro 32GB (2 x 16GB) 288-Pin DDR4 SDRAM DDR4 3200 GPU: ASRock Phantom Gaming Radeon RX 560 + EVGA RTX 3080 Ti (disabled in...

www.tonymacx86.com

I don't have the front USB C enabled as I could never get full speed out of it, but the rear port is enabled and works at full speed.

Thank you very much Scope666 )

 

[dreamwhite]

Hi Dreamwhite, do you use front usb c on your pc case, if so, could you send me the usb map kext that you use as I use that port a lot. Also can you send me your BIOS settings. I will really appreciate your help.

To be fair I don't directly own those components .
Regarding the BIOS settings the one that Dortania suggest are fine, except for the DVMT Pre-allocated which should be 128MB rather than 64MB.

If you wanna enable the Type-C port you should tell me what's the header you're using in the motherboard so we can adapt the USB mapping

 

[Vhdin2]

To be fair I don't directly own those components .
Regarding the BIOS settings the one that Dortania suggest are fine, except for the DVMT Pre-allocated which should be 128MB rather than 64MB.

If you wanna enable the Type-C port you should tell me what's the header you're using in the motherboard so we can adapt the USB mapping

Hi Dreamwhite,
I want to enable both rear USB-C and front USB-C (for my PC case) on the motherboard. Could you help me do the usb mapping

 

[dreamwhite]

Rear USB Type-C should be identified by HS04/SS04, while front USB-C HS05/SS05. Can you confirm it?

 

[Vhdin2]

Rear USB Type-C should be identified by HS04/SS04, while front USB-C HS05/SS05. Can you confirm it?

Thanks, Dreamwhite, I will check them

 

[Vhdin2]

Ok, I believe it is fixed now.

Hi SonicMayhem3787, is that ok if you send me your usb port kext as I also use both usb c ports as you.

 

[Vhdin2]

Rear USB Type-C should be identified by HS04/SS04, while front USB-C HS05/SS05. Can you confirm it?

Hi Dreamwhite, yes you are right. The 2 usb c ports are SS04 and SS05. Can you tell me how to adjust your SSDT_xh_cmsd4 (the one is related to usb) to enable both usb c? . I check the SSDT file and have no idea what it is

 

[Vhdin2]

If you look at the comments field of the image, it says what ports are what:

[Success] - Asus ROG Strix Z490-E Gaming + i9 10900K + OpenCore

I wanted to post my config if it helps anyone else. (full EFI folder attached) Motherboard: Asus ROG Strix Z490-E Gaming CPU: Intel 10900K RAM: CORSAIR Vengeance RGB Pro 32GB (2 x 16GB) 288-Pin DDR4 SDRAM DDR4 3200 GPU: ASRock Phantom Gaming Radeon RX 560 + EVGA RTX 3080 Ti (disabled in...

www.tonymacx86.com

I don't have the front USB C enabled as I could never get full speed out of it, but the rear port is enabled and works at full speed.

Hi Scope666, does the HS06 (internal header) include both internal usb 1-2 and usb3-4 or only 1-2?

 

[scope666]

Hi Scope666, does the HS06 (internal header) include both internal usb 1-2 and usb3-4 or only 1-2?

I believe it's both. (1-4)