[SUCCESS] Asus ROG Strix Z270F + i7-7700k + R9 280x

[kukkis]

If you search this text from that link you should find everything you need. It is all there.

"Now do not try to reboot and boot from M.2, you haven’t spoof Kabylake, HD630, and M.2. So it can’t boot up."

 

[pawint]

I

If you search this text from that link you should find everything you need. It is all there.

"Now do not try to reboot and boot from M.2, you haven’t spoof Kabylake, HD630, and M.2. So it can’t boot up."

I've been following that link, but that part the author doesn't use Samsung 960, so I thought it's different.

 

[rein22]

Have you selected the SSD as primary boot?

 

[pawint]

Turns out I was editing the wrong config.plist. Everything works well, except the sound. Searching for a solution now.

 

[homerman]

Hello, my config Asus ROG Strix Z270E, 1080 ti, Intel Core i7 - 7700K.
I can not working the my video card and network.
I used clear OS, and fix to processor:
<key>FakeCPUID</key>
<string>0x0506E3</string>

If i use nvidia web driver to 1080ti, system is started, but resolution very low, and driver not working, i use any parametres to start system, don`t working.
And Ethernet don`t work.

How kextx or config.plist settings you used to Ethernet?

 

[pawint]

For NvidiaWebDriver please check this link
https://www.tonymacx86.com/threads/solving-nvidia-driver-install-loading-problems.161256/

There are many possible problems. In my case I installed the Nivida Web Drivers, but when restarted it still not recognize my 1060.

My problem was fixed in problem #6.

 

[vpetrovic]

Did you enable USB3 ports in USB stick config.plist? I had the same problem at first that sierra stuck at the end of the boot as my mother board had only USB3 ports and I tried to boot from USB3 stick but enabling the USB3 ports in USB stick config.plist solved the problem.

I also followed this guide and it worked perfectly.
https://www.tonymacx86.com/threads/...-strix-i7-7700k-hd-630-4k-m-2-alc1220.216999/

Could you please send me a link with your patched SSDT file for USB?
I can't meke my USB3 ports to work...it's frustrating.
Thanks

 

[sxpal]

Hi,
Asus Z270F - i7 7700K - 2x r9 280x - Samsung EVO 960 NVME - 32 GB RAM
I'm using Final Cut Pro 10.3.4

BIOS primary display iGPU 96MB
Luxmark test working but when i open FCPX. CRASH.

I'm using Display Port on motherboard.

When i disable iGPU Final Cut Pro working but only one r9 280x working. Luxmark very vell.

This is my Clover Folder.

 

[sxpal]

OK. Disabled iGPU only two r9 280x garphic card. But i have a problem. My monitor 4k.
I connected the hdmi cable on r9 280x. Only 30hz 4k resolution. How can i 60 hz?

 

[LeandroRiviello]

H

Specs
Motherboard
Asus ROG Strix Z270F

CPU
Intel i7-7700k @ 5GHz

GPU
MSI Radeon R9 280x

Memory
32GB Crucial Ballistix 2400MHz

Storage
1 x Samsung 960 EVO 500GB
2 x Samsung 850 EVO 250GB
2 x Toshiba P300 2TB

OS
macOS Sierra 10.12.3

Problems/solutions
Motherboard
Everything works out of the box except for the network card. I tried the IntelMausiEthernet.kext, but could not get it to work. Ended up using the patched AppleIntelE1000e.kext instead. Added to /L/E. I have not tried the onboard audio, as I'm using an external card, but I do believe it is working as it should.

CPU
Had to use FakeCPUID in Clover (config.plist), as described in the Kaby Lake thread here: https://www.tonymacx86.com/threads/...cpus-200-series-motherboards-in-macos.211743/

GPU
Working out of the box.

Memory
Working out of the box.

Storage
My boot volume is on the Samsung 960 EVO M.2 NVMe SSD. I had to use both the Clover patch from PikeRAlpha and the patching script by RehabMan.
https://pikeralpha.wordpress.com/2016/06/27/nvmefamily-kext-bin-patch-data/
https://github.com/RehabMan/patch-nvme

The two Samsung 850 EVO SSDs and the two Toshiba P300 HDDs are setup in a Fusion + Raid 0 configuration. https://rossfisher.me/2016/01/how-t...os-x-10-11-el-capitan-genuine-and-hackintosh/

Other
Shutdown does not work yet. The computer reboots instead of shutting down. I'm still looking into this. I've tried the "FixShutdown" feature in Clover, without success. Suggestions are very welcome.

And that is pretty much it. Everything works great, benchmarks are available in appropriate threads
https://www.tonymacx86.com/threads/post-macos-os-x-geekbench-benchmarks.146690/page-42#post-1451638
https://www.tonymacx86.com/threads/...aphics-benchmarks.147037/page-25#post-1451670

Hi! How you change the ¨secure mode¨?