Success: Asrock z97e-itx/ac

[venomzed]

Getting the wifi/BT card that comes with the board to work is possible... If you want me to I can try to dig up some
links and instructions. I have it working.

Cheers!
Rudolf

Links Please!!!, I'm working on getting the Out of box bluetooth to work .

boot fix DONE
ethernet DONE
audio DONE
wifi DONE

 

[rudz]

Links Please!!!, I'm working on getting the Out of box bluetooth to work .

boot fix DONE
ethernet DONE
audio DONE
wifi DONE

Check post #49:
http://www.tonymacx86.com/user-builds/181031-success-asrock-z97e-itx-ac-5.html#post1237231

Cheers,
Rudolf

 

[venomzed]

boot fix DONE
ethernet DONE
audio DONE
wifi DONE
bluetooth DONE

cool

Now need Sleep fix no audio after sleep and keep doing some kind of check that won't let it deep sleep

one post says kext and another says change definition from iMac 15,1 to iMac 14,1 i'm not sure if its do both or do either.

 

[rudz]

boot fix DONE
ethernet DONE
audio DONE
wifi DONE
bluetooth DONE

cool

Now need Sleep fix no audio after sleep and keep doing some kind of check that won't let it deep sleep

one post says kext and another says change definition from iMac 15,1 to iMac 14,1 i'm not sure if its do both or do either.

I am in a similar position: my audio seems to work after failed sleep, though. But as you can see: sleep does not.
I have heard it might have to do with USB, but have not been able to patch my DSDT correctly...

Could you check in console what your wake reason is? Just open Utilities/Console and search for wake reason.
Also, what is the result of "pmset - g assertions"?
Just trying to find out whether its the same for you...
I am using iMac 16.2, btw., because I have a Broadwell i5-5675c.

Cheers!
Rudolf

 

[Huberer]

@rudz
You're using clover, right? If yes try the option "SlpSmiAtWake" under "Acpi" within Clover Configurator. If you're also facing problems with shutdown try to tick "FixShutdown", also under "Acpi".
Saw this info somewhere in the wide www and can't remember anymore. I don't have this board and didn't face similar problems. But it's just a guess

Huberer

 

[rudz]

@rudz
You're using clover, right? If yes try the option "SlpSmiAtWake" under "Acpi" within Clover Configurator. If you're also facing problems with shutdown try to tick "FixShutdown", also under "Acpi".
Saw this info somewhere in the wide www and can't remember anymore. I don't have this board and didn't face similar problems. But it's just a guess

Huberer

Hi Huberer and thanks for the hint - I tried, but it did not change anything - unfortunately.
I did have the FixShutdown ticked already...
We'll see - I managed to compile my DSDT, but have not found the time to find out how exactly I need to change the USB config.

I have also requested patches at Pjalms Repo - but there does not seem to happen much lately.

Other than Sleep - everything is working very nicely. I am shutting down instead of sleeping - but that's not the ideal solution...

Cheers!
Rudolf

 

[rudz]

FIXED FIXED FIXED!

I did it ;o)

My system sleeps now!

I managed to compile my DSDT after removing lines with "Zero"
Also one line with "Arg0"
Had to Change Some values from 0x0000 to 0x0001 in Device SIO0
(I changed Maximum and length to 1 - don't know what I am doing, but it then compiled)
I then ignored all other warnings and applied ReHabMans patch called "[usb] USB3 _PWR 0x0D (instant wake)" from his laptop Repo.

And after I placed the resulting DSDT in the patched folder - it worked!

My system sleeps now!

Did I mention that my system sleeps now?

Cheers!

Rudolf

 

[Huberer]

Good to hear that you could solve the problem, perfect.

 

[TheGeek]

Hey rudz,

sounds very good. I also had some experiments with ReHabMans Kext going on to get sleep working. Could you please upload your DSDT file?

Cheers

 

[rudz]

My DSDT might be different from your's, as I am using internal graphics of my Broadwell i5-5675c. It's now attached.
And please note - I am no specialist - so there might be errors or mistakes.
Seems to work for me anyways.
Cheers,
Rudolf