[Success] ASRock Z390 Phantom Gaming-ITX + TB3 + iGPU + Mojave + SFF Build
- Thread starter rj510
- Start date
- Joined
- May 31, 2016
- Messages
- 50
- Motherboard
- Asrock Z390 Phantom Gaming itx/ac - OC
- CPU
- i7-8700
- Graphics
- RX 460, 2560x1080
- Mac
- Mobile Phone
Maybe disable TB Boot Support.
- Joined
- Dec 13, 2010
- Messages
- 350
- Motherboard
- Dell Optiplex 5080
- CPU
- i5-10500T
- Graphics
- UHD 630
- Mac
- Mobile Phone
Now I see that the load of drama is missing, the rest is perfect
some of that is commented on:
www.tonymacx86.com
some of that is commented on:
[SUCCESS] Gigabyte Designare Z390 (Thunderbolt 3) + i7-9700K + AMD RX 580
You beauty mate! Bonza! Thankyou @CaseySJ, @Elias64Fr and all the others that have made this a reality! After updating my onboard TB3 EEPROM it appears that everything is working, but still need to do further testing. I have Razer Core X eGPU, OCW TB3 10Gbe and Caldigit TX3 Plus dock all...
www.tonymacx86.com
- Joined
- May 31, 2016
- Messages
- 50
- Motherboard
- Asrock Z390 Phantom Gaming itx/ac - OC
- CPU
- i7-8700
- Graphics
- RX 460, 2560x1080
- Mac
- Mobile Phone
Congratulate ! And great to know that our UID are different. UUID dominio changes every reboot while UID remain the same. It's better to mask UID.
You still stay in the stock 14? Is the type-c working normally?
- Joined
- May 23, 2019
- Messages
- 243
- Motherboard
- ASRock Z390 Phantom
- CPU
- i9-9900K
- Graphics
- UHD 630
- Mac
- Mobile Phone
You have 2 x Ethernet and 2 x USB port map in your kexts
- Joined
- May 16, 2012
- Messages
- 108
- Motherboard
- ASRock Z390 Phantom Gaming-ITX
- CPU
- i5-9600K
- Graphics
- RX 6950 XT
- Mac
Didn't even notice. Corrected! Thanks for pointing that out.
Last edited:
- Joined
- May 16, 2012
- Messages
- 108
- Motherboard
- ASRock Z390 Phantom Gaming-ITX
- CPU
- i5-9600K
- Graphics
- RX 6950 XT
- Mac
@fontanero And now you can update your TB firmware to 20 from 14, as long as you have a windows install to do so.
- Joined
- Mar 25, 2011
- Messages
- 10
- Motherboard
- ASRock Z390 Phantom Gaming ITX
- CPU
- i5-9600k
- Graphics
- RX 570
@candurin can you share your full BIOS settings please? I've been using the OPs BIOS settings since day one along with their Clover EFI. However, since I just upgraded the BIOS to 4.40C and loaded UEFI defaults, I thought it would be a good opportunity to review/simplify my settings. Plus, given the success you've had with TB3 and Clover I'd like to adopt what you have. I also have a dGPU which appears you have as well.
Thanks!
Thanks!
Last edited: