- Joined
- Oct 16, 2011
- Messages
- 17
- Motherboard
- Z390
- CPU
- 9900k
- Graphics
- AMD
Hi thanks for the quick reply.
I have a Radeon 570 that I'm planning on using. But for the install, I physically pulled it out of the mobo and enabled onboard graphics. I have gone through all of your B IOSsettings, including CFG Unlock, and I am also using v 1.6. I did not swap the BT card, but don't need WiFi working on this build. After playing around with things for a while, I got passed the first stage of the installation (although there was a reboot during '2 minutes remaining'). I am now stuck on the second stage of the installation. I get to where it says 'installing' - 'about 15 minutes remaining'. Previously, it was restarting, but adding debug=0x100 prevents the restart but it is frozen.
Mojave version 14.5.02
I did install the patches inside the ACPI folder.
One thing I was confused about. Inside your kexts.zip. The kexts inside the 'in LE folder' don't get installed until after the initial install, right? There's no other hidden place inside the EFI partition that I need to put those, correct?
Also, also strange, when I open Clover, I can no longer see the 'install mac os' partition to get back into the main installer. I have another physical drive with Windows 10 on this system, and if I check out the drive that supposedly has Mojave installed on it, it is still completely full; leading me to believe that the initial first stage was unable to do write operations for some reason. I'm using a Samsung EVO 970 NvME so that should be fine. I dunno...i've spent way too long on this.
I have a Radeon 570 that I'm planning on using. But for the install, I physically pulled it out of the mobo and enabled onboard graphics. I have gone through all of your B IOSsettings, including CFG Unlock, and I am also using v 1.6. I did not swap the BT card, but don't need WiFi working on this build. After playing around with things for a while, I got passed the first stage of the installation (although there was a reboot during '2 minutes remaining'). I am now stuck on the second stage of the installation. I get to where it says 'installing' - 'about 15 minutes remaining'. Previously, it was restarting, but adding debug=0x100 prevents the restart but it is frozen.
Mojave version 14.5.02
I did install the patches inside the ACPI folder.
One thing I was confused about. Inside your kexts.zip. The kexts inside the 'in LE folder' don't get installed until after the initial install, right? There's no other hidden place inside the EFI partition that I need to put those, correct?
Also, also strange, when I open Clover, I can no longer see the 'install mac os' partition to get back into the main installer. I have another physical drive with Windows 10 on this system, and if I check out the drive that supposedly has Mojave installed on it, it is still completely full; leading me to believe that the initial first stage was unable to do write operations for some reason. I'm using a Samsung EVO 970 NvME so that should be fine. I dunno...i've spent way too long on this.